• Journal of the Korea Safety Management & Science
• /
• v.4 no.2
• /
• pp.11-22
• /
• 2002

In this study, an asymmetric lifting posture prediction model was developed, which was a three-dimensional model with 12 links and 23 degrees of freedom open kinematic chains. Although previous researchers have proposed biomechanical, psychophysical, or physiological measures as cost functions, for solving redundancy, they lack in accuracy in predicting actual lifting postures and most of them are confined to the two-dimensional model. To develop an asymmetric lifting posture prediction model, we used the resolved motion method for accurately simulating the lifting motion in a reasonable time. Furthermore, in solving the redundant problem of the human posture prediction, a moment weighted Joint Range Availability (JRA) was used as a cost function in order to consider dynamic lifting. However, it is known that the moment weighted JRA as a cost function predicted the lower extremity and L5/S1 joint motions better than the upper extremities, while the constant weighted JRA as a cost function predicted the latter better than the former. To compensate for this, we proposed a hybrid moment weighted JRA as a new cost function with moment weighted for only the lower extremity. In order to validate the proposed cost function, the predicted and real lifting postures for various lifting conditions were compared by using the root mean square(RMS) error. This hybrid JRA reduced RMS more than the previous cost functions. Therefore, it is concluded that the cost function of a hybrid moment weighted JRA can be used to predict three-dimensional lifting postures. To compare with the predicted trajectories and the real lifting movements, graphical validations were performed. The results also showed that the hybrid moment weighted cost function model was found to have generated the postures more similar to the real movements.

• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.444-452
• /
• 2022

This research aims to investigate the relationship between safety climate and safety perception and safety behavior. Safety perception of the relationship is considered to have a mediating effect. Previous literature has tended to regard safety perception as an independent variable at the same level as the safety climate, which can be said to depend on behavioralism to approach the causal relationship to an one-way perspective. The survey was administrated through full- service carries in Korea such as Korean Air and Asiana Airlines, and low-cost carriers such as JeJu air, Jin air, and Air Pusan. It can identify a mediator of safety perception between safety climate and safety behavior. There are significant indirect effects of each value, which means mediators values of safety perception of safety climate variables and safety behavior. The study highlights that airlines should focus on the importance of their psychological aspects to strengthen the safety behavior of flight attendants and the value of organizational efforts to mature safety perceptions, suggesting some implications of theoretical and practical aspects.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10a
• /
• pp.486-488
• /
• 2000

본 연구는 정형기법을 사용하여 Safety-Critical System의 개발 방법론을 제시한다. Safety-Critical System의 전체적인 개발 과정을 제시하고 Safety-Critical System 중의 하나인 원자력 발전소 시스템 중 Reactor Protection System(RPS)을 정형 명세(Formal Specification)하고 정형 검증(Formal Verification)하는 과정과 그에 따른 각 과정의 Compliance를 확인하는 예를 든다. 여기서 정형 명세에는 Software Cost Reduction(SCR)이하는 도구가 사용되었고, 정형 검증에는 SPIN이, Compliance를 확인하는 데에는 Prototype Verification System(PVS)를 사용하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.4
• /
• pp.102-110
• /
• 2010

The reliability evaluation may be a efficient method for estimating of the quantitative structural safety considering the effect of uncertainties included in high-speed railway bridges. The expected life-cycle cost(LCC) based upon the reliability evaluation will reasonably offer the safety level and design criteria of high-speed railway bridges. Therefore, this study determined the expected life-cycle cost and optimal design method of high-speed railway bridges on the basis of the result of the numerical analysis and reliability evaluation. For this, after creating various design method based upon the standard design of high-speed railway bridges, the numerical analysis is conducted on each of the alternative design methods. The reliability evaluation by the design strength limit state function is conducted considering the effect of external uncertainties on the basis of the numerical analysis result. The expected life-cycle cost of high-speed railway bridges is calculated on the basis of the reliability evaluation result by each of the alternative design methods. Also, the optimal design method is determined using the calculated expected life-cycle cost. In addition, The result of reliability evaluation and expected life-cycle cost of optimal design method are examined considering the effect of internal uncertainties. It is expected that the result of this study can be used as a basic information for the systematic safety evaluation and optimal structure design of high-speed railway bridges.

• Journal of the Korean Institute of Gas
• /
• v.7 no.4 s.21
• /
• pp.61-66
• /
• 2003

The objective of this study is to develop a Cost-Benefit analysis system which would help us to make optimal decision among safety investment alternatives, calculating and comparing costs and benefits for facilities in chemical plants. So, the accident frequency analysis module and the accident damage prediction module were developed for estimating quantitative risks in chemical facilities, and domestic societal risk criterion was presented after the comparative analysis of major industrial cases and societal risk criteria of advanced countries like the Netherlands, Australia, U.S.A., U.K., and Germany. Also, the Cost-Benefit Analysis System which compares the safety investment alternatives based on their deduced net present values was developed through the selection of proper cost and benefit items by field studies

• Infection and chemotherapy
• /
• v.50 no.4
• /
• pp.319-327
• /
• 2018

Background: Lancet-related needlestick injuries (NSIs) occur steadily in clinical practices. Safety-engineered devices (SEDs) can systematically reduce NSIs. However, the use of SEDs is not active and no study to guide the implementation of SEDs was known in South Korea. The lancet-related NSIs may be eliminated to zero incidence using a SED lancet with effective sharp injury protection and reuse prevention features. Materials and Methods: We implemented a SED lancet by replacing a conventional prick lancet in a tertiary hospital in a sequential approach. A spot test of the new SED was conducted for 1 month to check the acceptability in practice and a questionnaire survey was obtained from the healthcare workers (HCWs). A pilot implementation of the SED lancet in 2 wards was made for 1 year. Based on these preliminary interventions, a hospital-wide full implementation of the SED lancet was launched. The incidence of NSIs and cost expenditure before and after the intervention were compared. Results: There were 29 cases of conventional prick lancet-related NSIs for 3 years before the full implementation of SED lancet. The proportion of prick lancet-related NSIs among yearly all kinds of NSIs during two years before the pilot study was average 11.7% (22/188). Pre-interventional baseline incidence of all kinds of NSIs was 7.01 per 100 HCW-years. After the full implementation of SED lancet, the lancet-related NSIs became zero in the 2nd year (P = 0.001). The average direct cost of 18,393 US dollars (USD) per year from device and post-exposure medical care before the intervention rose to 20,701 USD in the 2nd year of the intervention. The incremental cost-effectiveness ratio was 210 USD per injury avoided. Conclusion: The implementation of a SED lancet could eliminate the lancet-related NSIs to zero incidence. The cost increase incurred by the use of SED lancet was tolerable.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.4
• /
• pp.39-48
• /
• 2005

Both supply chain management and safety management contribute to strengthening a company's competitiveness. However, there is no previous research that considers supply chain management and safety management simultaneously The objective of this research is to study on application of safety management to supply chain. In this paper, the concept of supply chain safety management is defined. Based on the concept of supply chain safety management, supply chain safety management model is developed that consists of supply safety management, production safety management, storage safety management, and distribution safety management. In order to apply supply chain safety management, a methodology is developed that consists of four phases. Applying the supply chain safety management model, it is expected a company to lower cost as well as to raise customer satisfaction level.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.4
• /
• pp.417-425
• /
• 2013

According to industrialization and urbanization the number of increasing cars is attributable to an explosive increase of the vehicle emissions. In this study, in consideration of the population and local transportation characteristics of South Chungcheong Province the environmental and economic cost-benefit analyses are performed to evaluate whether the CNG bus conversion gives what kind of effects. Based on the analysis result the expansion and distribution plan of CNG bus is proposed for South Chungcheong Province, and the local supply policy model is also proposed considering the acquisition and management of the economic situation of CNG charging infrastructure and the small transportation companies.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.2
• /
• pp.155-165
• /
• 2004

It is needed to develop on-line real time management and RFID-PPS(Radio Frequency Identification-Pallet Pool System) by putting information technology. Additionally, it is possible to figure out the flow of all the materials loaded on the RFID pallet; product, material, raw material immediately, so that epoch-making management is possible and it contributes to the reduction of logistics cost because there are little loss or outflow of pallet. The materials flow is getting speedy and inventory is decreasing in the logistics process, and also bad inventory and loss problems are prevented. As a result, not only logistics cost of company but also national logistics cost is decreased. Thus it contributes to the strength of national competitiveness.

• Journal of the Korean Society of Safety
• /
• v.17 no.3
• /
• pp.90-95
• /
• 2002

Den have been many construction projects in urban n We have a lot of problems which have to be solved especially against residence complaints existing building damage due to construction worts. We sometimes have to pay a certain amount of cost to solve the above problem, not in planning. In addition to, we have to suffer from work delay due to confronting problem. Almost all of these are due to blasting work to break solid rock to be excavated. Therefore, this study is focused on finding out how to reduce noise more cheaply. Four cases(4) as cheaper but more effective way have been tested to find out which way of local fence will have better moise reduce function in a field site. Where five(5) large breakers are being operated. It is concluded that more form and shape of local movable panel than the site of panel can be influenced on noise reduce.