• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.6
• /
• pp.546-552
• /
• 2010

As the demands for the safety and convenience applications of the vehicles increase, the data load for the In-vehicle Network has increased significantly. As a result, a deterministic and fault-tolerant communication system is required to implement the safety critical applications such as X-by-wire systems. FlexRay communication system is a new standard of network communication system which provides the high speed serial communication, time triggered bus and fault tolerant communication between electronic devices. In addition to time-triggered communication, as providing of the event-triggered communication such as CAN, FlexRay protocol is able to manage the restricted communication resource more effectively. This paper presents the development of FlexRay driver which will be applied to the future ECU's communication system. To develop the FlexRay driver, the FlexRay requirement specification and FlexRay specification is analyzed. The developed FlexRay driver is implemented by using MPC5567 microprocessor of the Freescale semiconductor. To verify the developed FlexRay driver, the waveform of the FlexRay driver was measured and compared with the CAN communication system. As a result, the bus load is reduced about 13% compared with the CAN communication system.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.279-286
• /
• 2018

Recently, a safety control platform to monitor the safety of train operation in real time and prevent accidents and risks through control is under study. In the initial design, DDS communication method supporting distributed network is adopted for real-time processing of large amount of data according to the integration of existing distributed safety data. However, communication between server and console inside the safety control platform is applied to existing TCP socket communication. In the case of TCP socket communication, it is possible to process data for a small system of a safety control test bed by one-to-one communication. However, if the data is expanded all over the country in the future, it becomes difficult to cope with a case where communication traffic occurs due to vast amount of data. In this paper, we propose DDS communication method to support distributed network between server and console of security control platform, and demonstrate TCP socket and DDS method, and compare throughput and speed. As a result, we have found that the scalability and flexibility are improved in case of applying DDS communication to future systems.

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.3975-3984
• /
• 2022

Distributed control system architecture is adopted for I&C systems of Prototype Fast Breeder Reactor, where the geographically distributed control systems are connected to centralized servers & display stations via switched Ethernet networks. TCP/IP communication plays a significant role in the successful operations of this architecture. The communication tasks at control nodes are taken care by TCP/IP offload modules; local area switched network is realized using layer-2/3 switches, which are finally connected to network interfaces of centralized servers & display stations. Safety, security, reliability, and fault tolerance of control systems used for safety-related applications of nuclear power plants is ensured by indigenous design and qualification as per guidelines laid down by regulatory authorities. In the case of commercially available components, appropriate suitability analysis is required for getting the operation clearances from regulatory authorities. This paper details the proposed approach for the suitability analysis of TCP/IP communication nodes, including control systems at the field, network switches, and servers/display stations. Development of test platform using commercially available tools and diagnostics software engineered for control nodes/display stations are described. Each TCP link behavior with impaired packets and multiple traffic loads is described, followed by benchmarking of the network switch's routing characteristics and security features.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.185-191
• /
• 2015

This paper suggest the safety class communication board in order to design the safety network of the nuclear safety class controller. The reactor protection system use the digitized networks because from analog system to digital system. The communication board shall be provided to pass the required performance and test of the safety class in the digital network used in the nuclear safety class. Communication protocol is composed of physical layer(PHY), data link layer(MAC: Medium Access Control), the application layer in the OSI 7 layer only. The data link layer data package for the cyber security has changed. CRC32 were used for data quality and the using one way communication, not requests and not responses for receiving data, does not affect the nuclear safety system. It has been designed in accordance with requirements, design, verification and procedure for the approving the nuclear safety class. For hardware verification such as electromagnetic test, aging test, inspection, burn-in test, seismic test and environmental test in was performed. FPGA firmware to verify compliance with the life-cycle of IEEE 1074 was performed by the component testing and integration testing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.3
• /
• pp.582-588
• /
• 2003

There have a lot of marine accident due to the increasing transportation by sea in accordance with economy growth. Accordingly, ware fully aware of the importance of the development of safety control system so that may prevent the sacrifice of life and disasters on the sea. The objective of this research in to investigate the more effective system by establishing the prevention of safety accident and marine information system as a national project.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.2
• /
• pp.55-63
• /
• 2019

Vehicle communication networks have some deficient network resources to support a vast multimedia service including safety driving information, video, news and some broadcast relayed from the playgrounds such as professional baseball games for autonomous vehicles. This paper deals with the framework for providing seamless multimedia service including safety driving information using multicast in cooperated-connected vehicle communication network (CVCN). It adopts smart-switch (SS) and smart intelligent multicast agent(SIMA) to support the seamless multimedia service. The SS manages and switches multimedia streams through SIMA in CVCN network. The SIMA to operate as an access point, is composed of multicast supporting part and control part of mobile devices/autonomous vehicles in CVCN network. Therefore this proposed technique using SS and SIMA within CVCN network is a new framework for multimedia service that can disperse the load of server.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.125-132
• /
• 2017

Vehicular safety service reduces traffic accidents and traffic congestion by informing drivers in advance of threats that may occur while driving using vehicle-to-vehicle (V2V) communications in a wireless environment. For vehicle safety services, every vehicle must broadcasts a Basic Safety Message(BSM) periodically. In congested traffic areas, however, network congestion can easily happen, reduce the message delivery ratio, increase end-to-end delay and destabilize vehicular safety service system. In this paper, to solve the network congestion problem in vehicle safety communications, we approximate the relationship between channel busy ratio and the number of vehicles and use it to estimate the total network congestion. We propose a new context-aware transmit power control algorithm which controls the transmission power based on total network congestion. The performance of the proposed algorithm is evaluated using Qualnet, a network simulator. As a result, the estimation of total network congestion is accurately approximated except in specific scenarios, and the packet error rate in vehicle safety communication is reduced through transmit power control.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.9
• /
• pp.1379-1384
• /
• 2017

To guarantee safety and reliability, RAMS(Reliability Availability Maintainability and Safety) activity for a communication software in train communication network is studied. In this paper, preliminary hazard analysis in RAMS activities is studied for the communication software. Preliminary hazard analysis is done through library for communication software that the specification is defined by IEC 61375. The hazards are defined, then causes and consequence for each hazard are defined. The total 36 preliminary hazards are classified. For high severity hazards are changed to acceptable level by upgrading of system requirement specification.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.766-769
• /
• 2005

In a ubiquitous environment made up of multiple sensors, most sensors participate in communications with limited battery, and the sensor node isn't able to participate in communications when all the battery is used up. When an existing authentication method is used for the sensor node which has to participate in a long term communication with limited battery, it creates a problem by making the length of network maintenance or sensor node's operation time relatively shorte. Therefore, a network structure where RM (Register Manager) node and AM (Authentication Manager) node are imported to solve the energy consumption problem during a communication process is presented in this thesis. This offers a low power protocol based on safety through a mutual authentication during communications. Through registration and authentication manager nodes, each sensor nodes are ensured of safety and the algorithm of key's generation, encryption/descramble and authentication is processed with faster operation speed. So the amount of electricity used up during the communications between sensor nodes has been evaluated. In case of the amount of electrical usage, an average of $34.783\%$ for the same subnet and 36.855 for communications with two different subnets, are reduced. The proposed method is a protocol which maintains the limited battery for a long time to increase the effectiveness of energy usage in sensor nodes and can also increase the participation rate of communication by sensor nodes.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.95-100
• /
• 2014

The disaster safety communication infrastructure is necessary basic infrastructure for protection of people's lives, safety and wealth. In order to build this infrastructure needs ensure public safety disaster communication technology and cooperation disaster recovery agencies. Recently advanced national disaster safety communication infrastructure necessity according to people's expectations increase for public safety is emerging as domestic and international. And there is situation which required leading rolls of country. In this paper, we analyzed public disaster safety communication status of domestic and international. Also, we analyzed Korea disaster safety communication management necessity and proposed its policy implication.