An accident of an ammonia tank pipeline at a storage plant resulted in one death and three injuries in 2014. Many accidents including toxic gas releases and explosions occur in the freezing and refrigerating systems using ammonia. Especially, the consequence can be substantial due to that the large amount of ammonia is usually being used in the refrigeration systems. In this study, offsite consequence analysis has been investigated when ammonia leaks outdoors from large storages. Both flammable and toxic effects are under consideration to calculate the affected area using simulation programs for consequence analysis. ERPG-2 concentration (150 ppm) has been selected to calculate the evacuation distance out of various release scenarios for their dispersions in day or night. For offsite residential, the impact area by flammability is much smaller than that by toxicity. The methodology consists of two steps as followings; 1. Calculation for discharge rates of accidental release scenarios. 2. Dispersion simulation using the discharge rate for different conditions. This proactive prediction for accidental releases of ammonia would help emergency teams act as quick as they can.
Heat release characteristics of live fire load are an important parameter for performance oriented fire safety design of a building. While investigations have been carried out on the fire load and its burning behavior in office, residential and commercial buildings and so on, little effort has been paid for the rational treatment of fire load in bookstore. In this report, burning behavior of typical combustible objects in bookstore are studied by measuring heat release rates of bookshelf with book. Based on the results, it has reviewed fire safety when a fire accident occurs on the large bookstore and suggested peak heat release rate per burning surface, fire growth rate, etc of the live fire load required for fire safety design in bookstore.
Research and development activities have been actively conducted at universities, research institutions and research laboratories which belong to corporations. Because of blooming research and development activities in various fields, safety accidents in the laboratories happen consistently. The government office established Act on the establishment of safe laboratory environment to decrease safety accident rates and make environment of laboratories better, and it is effective slowly. However, in the case of laboratory safety management of the laboratory where various research and development activities are carried out. So it is difficult to closely monitor them. Even though safety inspections and periodic inspections is regularly conducted, these are focused on facilities and environment. According to a study of Dea-deok science town safety council, accidents in laboratories of 73% have arisen out of careless actions. Therefore, it is important for researchers to know to potential harmful factors in research. there is necessary to make a system to prevent laboratory accidents. The purpose of this study is that the researchers discovered potential hazard factors in laboratories. For that, foreign laboratory safety management systems has applied to domestic laboratories. Four laboratories in targeted institution has been selected to apply the appropriate personal protection equipments, job safety assessment and standard operating procedures. And I found the limitations of the process according to the excavations harmful factors in the research process. To overcome these limitations, Suggest a laboratory safety management system. This study discovered current laboratory safety system limitations and provides alternatives so that effective safety management can be achieved.
Korean Journal of Construction Engineering and Management
/
v.15
no.4
/
pp.3-10
/
2014
As the income level of a country gets improved, people's social, economic, and cultural expectation will grow at the same time. Although the income level of Korea has been remarkably improved, her work-related fatality rate is the highest among OECD countries. Moreover, the rate hasn't been reduced for more than 10 years. This study aims to provide appropriate measures for work-related fatality reduction by comparing the income levels and the work-related fatality rates of countries and by analysing the problems of our worker-oriented accident prevention policy. For the comparison of income level and work-related fatalities, this study suggests income-level incorporated fatality rate, and it turned out that the rate of Korea is the highest among the countries. In order to find out the causes of that result, this study has found that our law enforcement is much weaker than that of UK, which implicates more strict law enforcement policy is needed to improve our work-related safety.
The 7,993 cases of Survey Report of Fatal Industrial Accidents conducted jointly by the MEOL and the KOSHA for the recent seven years(2007-2013) were categorized according to personal and occupational characteristics, industry types, business sizes, job types, activities at the time accident, types of accidents, material agents(assailing materials), unsafe conditions, and unsafe acts. And it is found that among the 72.2 percent of fatal occupational accidents in the construction and manufacturing industries are caused by falling, sticking, bumping and being caught under objects & overturning. For this study, through the empirical analysis on causes of fatal industrial accidents, was used to identity high risk groups based on total data of 7,993 victims of occupational accidents. An annual fatal occupational injury (FOI) rate per 10,000 workers was about 0.47‱. The middle-aged group and the elderly group showed the highest FOI rates per 10,000 workers (0.73‱, 0.80‱), and the daily workers showed the highest FOI rate (1.46‱), and the craft and related trades workers showed the highest FOI rate (2.17‱). In case of industry type the mining industry (7.26‱) showed the highest FOI rate, followed by the sewerage, waste management, materials recovery and remediation activity industry (3.91‱) and the construction industry (2.71‱). The primary high risk target group that requires a strategy designed to reduce fatal occupation injuries caused by falling and bumping & contact(collision) is the construction industry, and the secondary high risk target group in the construction industry is classified as the equipment, machine operating and assembling workers in the construction industry, those aged 50 years old and above need the prevention measures against bumping & contact(collision) and being caught under an object & falling(objects), while those aged less than 50 years old need prevention measures against falling(persons).
Korean Journal of Construction Engineering and Management
/
v.19
no.5
/
pp.90-100
/
2018
Government needs a risk assessment method that is effective in preventing accidents as a part of the three principal projects of the government for protecting the people's lives for establishing preventative measures to prevent accidents in the construction sites, which accounted for more than half of all accidental mortality accidents, and promote the safety-oriented culture for making fundamental changes. Accidents at the medium and small sized construction sites accounted for 88.9% of the total construction accidents. The data indicates that improper management and lack of advanced safety measures due to the absence of a safety supervisor are the biggest problems. It is believed that active measures to evaluate and prevent risks at construction sites are necessary for preventing accidents in the medium and small sized construction sites. The objectives of this study is to identify the key risk items of common accident causes and propose a practical, preemptive, and improved risk assessment method by evaluating the problems in the safety management of construction sites for reducing the accident rate in the medium and small sized construction sites.
The purpose of this research is to propose an effective traffic safety countermeasure to reduce both violations of road traffic acts and accident rates related to the driver's characteristics by measuring them using Q analysis method, a microscopic statistics analysis method. As a result, violators of the road traffic act could be divided into five driving characteristics and causers of traffic accident could be classified into six driving characteristics. By understanding these characteristics, We could establish a proper traffic safety countermeasure for each driving characteristic. The accomplishments of this research are as follows: The first, We could classify the decisive driving characteristics, which cause road traffic acts and traffic accidents, into internal and external causes. The relationship between each driver's characteristic and the occurrence of the road traffic act and traffic accident could be recognized more clearly. We could find the dangerous driver samples who have Accidents proneness. The second, As a result of analyzing the characteristics of these factors, We could sort out and suggest countermeasure for reducing violation of road traffic acts and traffic accidents as a priority countermeasure and complementary countermeasure. Finally, transportation companies most closely related to automobile accidents can judge new personnels on the basis of their driving characteristics before hiring, and also apply this principle to the traffic safety education vigorously.
An analysis for the gamma radiation fields in the research reactor MAPLE-X10 facility has been peformed under the assumption of partial loss of reactor and service pool water to assess the safety from the view point of design. Four photon source terms considered in the analysis were calculated using the ORIGEN-S code. Gamma dose rate calculations over the reactor and service pools during the water-loss accident conditions were performed using QAD-CG code. MCNP code (Monte Carlo Neuron and Photon Transport code), also, was used to assess the scattered radiation fields away from the pools, which is appropriate for calculating the scattered photon dose rates outside of the solid angle subtended by the source and pool walls.
Safety and health education in technical high schools is especially important because the great majority of the students engage in the industrial field after graduation. But there are few reports on the state. of safety and health education in technical high schools in Korea. The aims of this study were to identify the problems of the present safety and health education in technical high schools in Korea and to propose the ways of improving health and safety education. To conduct this study, the textbooks for health and safety related courses, i.e., Introduction to Industry, Gyoryun(dril), and Physical Education, were reviewed. A questionnaire was mailed to the teachers of Introduction to Industry, Gyoryun, Physical Education, and school nurses in 188 technical high schools and the teachers of Gyoryun, Physical Education, and school nurses in 376 general high schools in November 1997. The final response rates were 42.0% for teachers of Introduction to Industry, 62.9% for teachers of Gyoryun, 47.9% for teachers of Physical Education, and 33.0% for school nurses. Also, a survey by self-administered questionnaire on the knowledge, attitude, and practice about safety and health was conducted from May through July 1998 among 44 employees graduated from technical high schools and 44 employees graduated from general high schools since 1995. The analysis of the textbooks showed that the contents of the ‘Industrial Safety and Environment’ section in Introduction to Industry were rather for safety managers than industrial workers and the contents about occupational hygiene and health were scanty. The majority of ‘Accident and Disaster’ and ‘Hazardous Substances’ section in Gyoryun overlapped with those in Introduction to Industry and several mistakes about health related descriptions were found. Some contents of Physical Education. ‘Mental Health’. ‘Emergency Care’. ‘Communicable Disease’, ‘Noncommunicable Disease’, and ‘Food Hygiene’ overlapped with those of Gyoryun. The teachers lectured safety and health related sections of textbook completely in 84.8% for Introduction to Industry, 62.1% for Gyoryun, 20.8% for Physical Education and the most frequent reason for the incomplete education was shortage of time.
Journal of the Korea Institute of Building Construction
/
v.23
no.5
/
pp.583-593
/
2023
For a holistic and precise assessment of safety benchmarks within a construction venture, it's paramount to delineate between the intrinsic features of the construction and its real-time, on-site performance metrics. In this study, we delved into genuine accident instances to discern the interplay between these construction attributes and on-ground performance determinants in relation to safety mishaps, employing the binomial logit analytical framework. Our scrutiny underscored that construction expenditure profoundly modulates the likelihood of fatal occurrences. Notably, variables pertinent to on-site safety protocols wielded considerable influence over both fatal mishaps and accidents implicating multiple personnel. These revelations intimate that while ascertaining the safety quotient of a construction initiative, a mere classification and recalibration based on fiscal dimensions can elucidate much. Yet, a comprehensive safety appraisal necessitates transcending quantitative indices, such as frequency of mishaps or casualty rates, to encapsulate the multifaceted interventions and strategies adopted at the construction locale.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.