• Journal of Korean Society of Forest Science
• /
• v.109 no.1
• /
• pp.41-49
• /
• 2020

In this study, the effect of seed pre-treatments and pellet coating materials to enhance the efficiency of large-scale propagation of Aster koraiensis seeds were investigated. Seeds were immersed in water for one day, and only those that sank were used for pre-treatment to use filled seeds. Pre-treatments were divided into hormone treatments, with gibberellic acid (GA₃; 200 and 500 ppm) and 24-epibrassinolide (10^-6, 10^-7, and 10^-8M), and priming with potassium nitrate (100 mM of KNO₃). To produce pellet-coated seeds, pellet materials (DTCS or DTK) were applied to control (unprimed) and primed seeds with binders (PVA or CMC). The maximum germination percent (GP) of seeds before pellet coating was 65% (with the priming treatment), and there was no difference in the GP of seeds among hormone treatments. For seeds sown in a growth chamber on filter paper, GP was 41% for control (unprimed/uncoated) seeds, 65% for uncoated primed seeds, 71% for DTCS/PVA-pellet-coated seeds, and 42% for DTK/CMC-pellet-coated seeds. Seeds that were primed first and then pellet-coated showed greatly improved GP, mean germination time (MGT), and germination rate than seeds that were only pellet-coated. For seeds sown in commercial soil in a greenhouse, control seeds had a GP of 27%, whereas primed seeds had the highest GP (58%), and their MGT and GT were 9.4 days and 7.0%·day, respectively. In addition, DTK/PVA-pellet-coated seeds (40%) also had a GP higher than the control (27%), and their MGT was 15-27 days. For seeds sown in sandy-loam soil in a greenhouse, unprimed-pellet-coated seeds and primed-pellet-coated seeds both had GPs ranged of 39%, which were lower than that of control seeds. In general, the seeds that were pellet-coated with DTK had a higher GP than those pellet-coated with DTCS. Furthermore, the MGT of unprimed-pellet-coated seeds was 15.0-19.8 days, which was longer than the MGT of primed-pellet-coated seeds. These results suggest that priming enhances seedling emergence of Aster koraiensis seeds. Moreover, when priming is combined with pellet coating, DTK is a more suitable pellet material than DTCS, and PVA and CMC are equally suitable adhesives.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.7
• /
• pp.1-8
• /
• 2008

We fabricated flexible electrophoretic display(EPD) driven by organic thin film transistors(OTFTs) on plastic substrate. We designed the W/L of OTFT to be 15, considering EPD's transient characteristics. The OTFTs employed bottom contact structure and used Al for gate electrode, the cross-linked polyvinylphenol for gate insulator, pentacene for active layer. The plastic substrate was coated by PVP barrier layer in order to remove the islands which were formed after pre-shrinkage process and caused the electrical short between bottom scan and top data metal lines. Pentacene active layer was confined within the gate electrodes so that the off current was controlled and reduced by gate electrodes. Especially, PVA/Acryl double layers were inserted between EPD panel and OTFT-backplane in order to protect OTFT-backplane from the damages created by lamination process of EPD panel on the backplane and also accommodate pixel electrodes through via holes. From the OTFT-backplane the mobility was $0.21cm^2/V.s$, Ion/Ioff current ratio $10^5$. The OTFT-EPD panel worked successfully and demonstrated to display some patterns.

• Reproductive and Developmental Biology
• /
• v.29 no.4
• /
• pp.253-257
• /
• 2005

This study was carried out to evaluate the effects of washing medium, breed and washing temperature of fresh and frozen-thawed boar sperm on mitochondrial activity and membrane integrity by flow cytometry. More than $80\%$ of fresh sperm washed with mTLP-PVA medium at $20^{\circ}C$ exhibited an intact membrane and a functional mitochondrion. With frozen-thawed samples, a large number of sperm showed both damaged membrane $(36.4\~46.9\%)$ and nonfunctional mitochondrion $(55.1\~71.1\%)$ in the mTLP-PVA and BTS washing media at $20^{\circ}C$. There were no breed effects of fresh and frozen-thawed sperm on mitochondrial activity and membrane integrity. The percentages of damaged membrane of fresh and frozen sperm, respectively, were higher at $4^{\circ}C$ washing temperature than at $20^{\circ}C$ washing temperature in the mTLP-PVA medium. We found that washing medium and washing temperature of fresh and frozen-thawed boar sperm were important for the analyses of mitochondrial activity and membrane integrity by flow cytometry.

• 대한생식의학회:학술대회논문집
• /
• 2004.11a
• /
• pp.54.1-54.1
• /
• 2004

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.465-468
• /
• 2008

SHCCs (Strain Hardening Cement Composites) show the high energy tolerance capacity due to the interfacial bonding of the fibers to the cement matrix. For effective material design and application of SHCCs, it is needed to investigate the compression, four-point bending, direct tensile response of SHCCs with different types of fibers and water-cement ratio. For these purposes, three kinds of fibers were used: PP(polypropylene, 2.0%), PVA(Polyvinyl alcohol, 2.0%), PE (Polyethylene, 1.0%). Also, effects of water-cement ratio(0.45, 0.60) on the SHCCs were evaluated in this paper. As the result of test, SHCCs with PVA and PE fiber were showed better overall behavior than specimens with PP fibers on bending and direct tensile test. Also, for the same type of fiber, SHCCs with water-cement ratio of 0.45 exhibited higher ultimate strength than specimen with water-cement ratio of 0.60 on compression strength, and showed the multiple cracking on bending and direct tensile test. Therefore, to improve of workability and dispersibility of SHCCs on water-cement ratio of 0.60, continual studies were needed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.2
• /
• pp.164-167
• /
• 2004

This study was carried out to investigate in vitro fertilization and development of in vitro matured pig oocytes inseminated with the Duroc boar sperm by different sperm washing media after thawing of the 5 ml frozen straws. Immature follicular oocytes (30-40) were transferred into each well of a Nunc 4-well multidish containing $500{\mu}l$ mTCM199 maturation medium. The sperm rich portion of ejaculates was collected into a 250 ml insulated vacuum bottle and gradually cooled 22 to $24^{\circ}C$ over a 2 h period. Semen was centrifuged at 800 g for 10 min and the seminal plasma discarded. Sperm were esuspended in a lactose-egg yolk and N-acetyl-Dglucosamine (LEN) diluent to contain $1{\times}10^{9}$ sperm/ml and cooled to $5^{\circ}C$ over a 2 h period. Immediately before freezing, semen was rediluted with an equal volume of LEN+4% glycerol and packed into 5 ml straws. After thawing of the 5 ml straw, the 5 ml semen was diluted with 20 ml Beltsville thawing solution (BTS) at room temperature. Oocytes were inseminated with untreated (unwashed and nonpreincubated) or treated sperm (washed two times in BTS, mTLP-PVA and mTBM media, respectively and nonpreincubated) with $2{\times}10^{7}$ sperm concentration. Oocytes were coincubated for 6 h in $500{\mu}l$ mTBM fertilization. At 6 h after IVF, oocytes were transferred into $500{\mu}l$ NCSU-23 culture medium for further culture of 6 h. Sperm penetration, polyspermy and male pronuclear formation of oocytes at 12 h after IVF and developmental ability of oocytes at 48 h after IVF were evaluated. Sperm penetration rate, male pronuclear formation and rate of cleaved embryos were higher in the BTS, mTLP-PVA and mTBM treatments than the unwashed treatment (p<0.05). The rate of blastocysts from the cleaved oocytes (2-4 cell stage) were higher in the mTLP-PVA treatment than in the unwashed, BTS and mTBM treatments. In conclusion, we recommend the washing of frozen-thawed sperm with mTLP-PVA medium before in vitro fertilization of oocytes in mTBM medium.

• Korean Journal of Animal Reproduction
• /
• v.21 no.1
• /
• pp.19-23
• /
• 1997

This present study was carried out to examine the effect of maturation media and liquid boar semen on in vitro maturation and feritilization of pig oocytes. The results obtained were as follows : When the oocytes were cultured for 36∼42 hours in mTCM-199, Waymouth MB 725/1 and mTLP-PVA medium, the maturation rates were 90%, 92% and 88%, respectively. The sperm penetration rates of pig oocyte matured in vitro were 87%(mTCM-199), 90%(Waymouth MB 725/1) and 86%(mTLP-PVA), respectively. The rates of nuclear maturation and fertilization of pig oocytes among three different media did not differ. However, the rate of male pronucleus formation of pig oocytes was significantly higher in pig oocytes matured in Waymouth MB 725/1(91%) than oocytes matured in mTCM-199(66%) and mTLP-PVA(62%) medium (P<0.05). When the collected sperm-rich fraction without diluent was used fro in vitro fertilization in mTCM-199 fertilization medium, the fertilization rate was 87.9%. However, when the liquid boar semen diluted with B tschwiler diluent was used at day 3 and 5 after dilution, the fertilization rate was 40.8% and 0.0%, respectively.

• Textile Coloration and Finishing
• /
• v.34 no.1
• /
• pp.20-26
• /
• 2022

Centrifugal spinning is an emerging technique for fabricating micro-to-nano-fibers in recent years. To obtain fibers with the desired size and morphology, it is necessary to configure and optimize the parameters used in centrifugal spinning. In this study, it was controlled by changing the solution's concentration (7.5, 10, and 12.5 wt.%) and disk's rotational velocity (6,000, 8,000, and 10,000 rpm) to prepare centrifugal spun nano-filter. The morphological property, air permeability, and dust collection efficiency of the PVA/PP bi-layer nanoweb prepared by centrifugal spun PVA on the PP micron nonwoven substrate are studied using a field emission scanning electron microscope, an air permeability tester, and a filter tester equipment, and the analysis results indicate that it is suitable as a nano-filter when the concentration of PVA solution is 10 wt.% and the rotational velocity of the disk is 8,000 rpm. The resultant reduced diameter and uniform fibers also proved that an excellent dust collection efficiency filter could be made.

• Proceedings of the KSAR Conference
• /
• 2003.06a
• /
• pp.22-22
• /
• 2003

This study was conducted to determine effects of polyvinyl alcohol (PVA), fetal bovine serum (FBS) and bovine serum albumin (BSA) on blastocoel formation, cell number, apoptosis and apoptosis-related gene expression of porcine diploid parthenotes developing in vitro. Embryos were collected from 2-cell or late 4-cell diploid parthenotes that activated with electro pulse, and in vitro cultured in the NCSU 23 medium supplemented without or with 0.1% PVA, 10% FBS or 0.4% BSA for day 7. The morphological analysis of apoptosis in embryos was carried out using propidium iodide staining and terminal deoxynucleotidyl transferase mediated dUTP nick end labeling. The expressions of Bcl-xL, Bak and P53 in blastocyst stage parthenotes and in vivo-derived blastocysts were determined using semiquantitative RT-PCR. The addition of 0.4% BSA to the culture medium enhanced the development of 2- or late 4-cell stage parthenotes to the blastocysts stage (P < 0.01) while FBS decreased the incidence of blastocoel formation. FBS also reduced cell numbers of blastocysts developed from both 2- (P < 0.001) and late 4-cell (P < 0.05) embryos and increased percentage of apoptosis in the blastocysts (P < 0.001). The relative abundance of Bcl-xL mRNA in diploid parthenotes cultured from 2-cell stage in the presence of BSA is similar with that in in vivo derived embryos, but is significantly higher than in parthenotes cultured with FBS, PVA or none protein supplement control. Bak mRNA showed a significant increase at the blastocyst stage in FBS supplement medium. This result suggests that apoptosis related gene expression is significantly affected by protein supplements, which may result in alteration of apoptosis and embryo viability of porcine embryos developing in vitro.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.16 no.3
• /
• pp.1-13
• /
• 1998

Some photopolymer, poly(vinyl cinnamoyl acetate)(PVCiA) was synthesized by esterification of polymer(vinyl alcohol(PVA) with monochloroacetic acid, followed by reaction poly(vinyl monochloroacetate)(PVChA) and potassium cinnamate. When esterification of PVA with monochloroacetic acid was reacted in the dimethyl sulfoxide(DMSO), in the synthesis of PVChA, it is very good yield and the successive cinnamoyl acetoxyl esterification of PVCiA can be successfully synthesized. But PVCiA is low photosensitive polymer if not added photosensitizing dyes. Here, we synthesized photosensitizing dyes. trifluoromethylindol squarylium dye derivatives(TFSQ). Indolization of 3-trifluoromethylphenyl-hydrazine formed 4- and 6-substituted indoles, the rate of 4- and 6-substituted indoles is close to unity. Absorption's coefficient of 1,3-bis(4-trifluoromethyl-1,3,3-trimethylindol) squarylium dye(TFSQ) is 7.57$\times$10\ulcorner, PVCiA added with TFSQ(3%) was highly sensitized six times than not added.