• Journal of Power System Engineering
• /
• v.2 no.1
• /
• pp.17-24
• /
• 1998

The combustion regime was discussed using a laser tomography and flame structure diagram. It was shown first how to represent the turbulent burning velocity and flame structural parameters in the dimensionless plane referred to as the flame structure diagram. And then, turbulent flame structure from the obtained images by laser tomography was compared with combustion regime in the Re-Da plane, one of the diagrams, specified by different researchers. As the result, the $u'/S_{L0}$ ratio at the boundary between the wrinkled laminar flame regime and reactant islands flame regime was found to be about 1.5.

• Transactions of Materials Processing
• /
• v.33 no.2
• /
• pp.87-95
• /
• 2024

The current study aims to prove that high-speed forming has better formability than conventional low-speed forming. Experimentally, the quasi-static forming limit diagram was obtained by Nakajima test, and the dynamic forming limit diagram was measured by electrohydraulic forming. For the experiments, the LS-DYNA was used to create the optimal specimen for electrohydraulic forming. The strain measurement was performed using the ARGUS, and comparison of the forming limit diagrams confirmed that EHF showed better formability than quasi-static forming. Theoretically, the Marciniak-Kuczynski model was used to calculate the theoretical forming limit. Swift hardening function and Cowper Symonds model were applied to predict the forming limits in quasi-static and dynamic status numerically.

• International journal of advanced smart convergence
• /
• v.13 no.1
• /
• pp.99-107
• /
• 2024

In AI image generation tools, most general users must use an effective prompt to craft queries or statements to elicit the desired response (image, result) from the AI model. But we are software engineers who focus on software processes. At the process's early stage, we use informal and formal requirement specifications. At this time, we adapt the natural language approach into requirement engineering and toon engineering. Most Generative AI tools do not produce the same image in the same query. The reason is that the same data asset is not used for the same query. To solve this problem, we intend to use informal requirement engineering and linguistics to create a toon. Therefore, we propose a sequence diagram and image generation mechanism by analyzing and applying key objects and attributes as an informal natural language requirement analysis. Identify morpheme and semantic roles by analyzing natural language through linguistic methods. Based on the analysis results, a sequence diagram and an image are generated through the diagram. We expect consistent image generation using the same image element asset through the proposed mechanism.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.289-293
• /
• 2007

The effect of temperature on the forming limit diagram was investigated for AZ31B magnesium alloy sheet through the limit dome height test in the range from room temperature to $300^{\circ}C$. The formability of AZ31B sheet was improved significantly according to the increasing temperature. Also we studied the springback characteristics through the 2D draw bending test with different blank holding forces at elevated temperatures. Springback quantity was considerably reduced as temperature went up. The blank holding force in the range used, however, had little influence on springback. Experimental results obtained in this study may provide a material database for AZ31B sheet.

• International Journal of Contents
• /
• v.12 no.4
• /
• pp.69-75
• /
• 2016

Adolescent media addiction has emerged as an important social agenda in Korea. However, there has not been enough discussion on the causal structure of media addiction and policy interventions. The objective of this study is to identify and assess the mechanism of the existing and the revised Shutdown policy based on the systems thinking approach. To achieve this purpose, we establish the relationship between media usage, flow, and addiction, and develop a causal loop diagram. Based on the causal loop diagram, we explore the causal structure of two policy scenarios: shutdown policy and deregulation. Our study suggests that policy interventions inducing direct parental control on children's media usage time are ineffective since the time control reduces children's autonomy, which helps alleviate media addiction. Therefore, this study suggests that policy intervention should focus on alleviating addiction itself rather than on controlling media usage time.

• Transactions of Materials Processing
• /
• v.16 no.5 s.95
• /
• pp.364-369
• /
• 2007

The effect of temperature on the forming limit diagram was investigated for AZ31B magnesium alloy sheet through the limit dome height test in the range from room temperature to $300^{\circ}C$. The formability of AZ31B sheet was improved significantly according to the increasing temperature. Also we studied the springback characteristics through the 2D draw bending test with different blank holding forces at elevated temperatures. Springback quantity was considerably reduced as temperature went up. The blank holding force in the range used, however, had little influence on springback. Experimental results obtained in this study may provide a material database for AZ31B sheet.

• Transactions of Materials Processing
• /
• v.24 no.5
• /
• pp.348-353
• /
• 2015

The PEPS(Polar-coordinated Effective Plastic Strain) FLD(Forming Limit Diagram), a new type of FLD based on a polar representation of the EPS(Effective Plastic Strain), appears to be an effective solution to the problem of non-linear strain path effects. This method has the advantages of the familiar strain-based diagram for linear loading, but without the strain-hardening limitations of the stress-based diagram, or non-intuitive aspects of alternate Cartesian diagrams based on effective plastic strain. In the current study, the PEPS FLD was applied to the development process of an aluminum automobile-body panel, including the necking or crack prediction, die design, and die modification. As a result, the PEPS FLD provided improved formability of aluminum sheet as compared to deriving the potential formability with non-linearity.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1751-1754
• /
• 2003

Due to advances in information technology, even Engineering Simulations can now be performed in web-based JAVA through an integrated operating system called Virtual Machine and the use of byte code, which guarantees the compatibility of identical codes in every computing system and makes it suitable for web-based simulation system development. This paper introduces an implementation embodied in JAVA Applet that allows a block-diagram type GUI that runs in a web browser for use in the dynamics simulation modeling of powertrains of vehicles and multi-body systems. This system is not restrained by any of the H/W and S/W in the user's computer, so that it has the advantage of providing a GUI that allows web-based block-diagram type modeling.

• Transactions of Materials Processing
• /
• v.18 no.8
• /
• pp.596-600
• /
• 2009

Finite element simulation is an alternative method to practically find the forming limit diagram(FLD). In this paper, the novel fracture criterion is utilized to predict the FLD in conjunction with finite element analysis for sheet forming. The principal scheme of the fracture criterion in this paper is that growth of the micro voids leads up to fracture in the viewpoint of micro-mechanics. The numerical FLD is verified by results of the out-of plane stretching test using hemispherical punch. The verification is also conducted about two types of material. These results are in good accord with the experimental results. Especially, the proposed scheme is appropriate to predict FLDs for a restricted material with low ductility after the instability point or ultimate tensile strength.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10b
• /
• pp.463-465
• /
• 1998

COncurrent Design Approach for Real-Time System(이하 COSATRS) 방법론은 Gomaa가 제안한 실시간 설계 방법론으로서 Real-Time Structured Analysis(이하 RTSA)또는 Concurrent Object-Based Real-Time Analysis(이하 COBRA)방법론을 이용하여 Control and Data Flow Diagram(이하 C&DFD)를 구성하고 이것에 병렬 태스크 구조화 지침, 정보 은닉 모듈 구조화 지침을 적용하여 Task Architecture Diagram (이하 TDA), Information Hiding Module(이하 IHM)을 구성하고 나서 이 둘을 결합하여 Software Architecture Diagram(이하 SAD)를 구성하게 된다. 본 논문에서는 CODARTS 방법론의 적용과정을 테이블을 구성하여 적용함으로써 실시간 S/W 설계 지원 시스템을 설계하였다.