• Title/Summary/Keyword: s{\bar{u}}\

Search Result 134, Processing Time 0.031 seconds

A Study on Dynamic Response Optimization of a Tracked Vehicle (궤도차량의 동적반응 최적설계에 관한 연구)

  • Kim, Y.H.;Kim, M.S.;Choi, D.H.;U, H.H.;Kim, J.S.;Kim, J.H.;Suh, M.S.
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.3 no.2
    • /
    • pp.16-29
    • /
    • 1995
  • In this study a tracked vehicle is idealized as a 2-dimensional 9-degrees-of-freedom model which takes into account the effects of HSU units, torsion bars, and track. For the model equations of motion are derived using Kane's method. By using the equations of motion, a numerical example is solved and results are compared to those obtained by using a general purpose multi body dynamic analysis program. The comparison study shows the reasonable coherence between the two results. which confirms the effectiveness of the model. With the model, dynamic response optimization is carried out. The objective function is the peak value of the vertical acceleration of the vehicle at the driver's seat, and the constraints are the wheel travel limits, the ground clearance. and the limits of other design variables. Three different sets of design variables are chosen and used for the optimization. The results show the attenuation of the acceleration peak value. Thus the procedure presented in this study can be utilized for the design improvement of the real system.

  • PDF

The Effects of Supungsunki-hwan Partitioned Prescriptions on Obese Type 2 Diabetes Mouse Model Induced by High Fat, High Carbohydrate Diet (수풍순기환 분할처방 투여가 고지방, 고탄수화물 식이로 유발된 비만형 제2형 당뇨병 동물모델에 미치는 영향)

  • Park, Eun-Young;Ahn, Se-Young;Ahn, Young-Min;Um, Jae-Young;Jang, Hyeung-Jin;Lee, Byung-Cheol
    • The Journal of Internal Korean Medicine
    • /
    • v.32 no.3
    • /
    • pp.387-396
    • /
    • 2011
  • Objectives : Recently a lot of research is being done for find antidiabetic medicine which has no side effects. This study aimed to investigate the antidiabetic and antiobesity effects of Supungsunki-hwan partitioned prescriptions on obese type 2 diabetes mouse. Methods : Type 2 diabetes mellitus and obesity were induced by Surwit's high fat, high sucrose diet for 8 weeks. Mice were divided into 3 groups of ND (normal diet, n=10) HFD (high fat and high sucrose diet, n=10) and SPP (high fat and high sucrose diet with Supungsunki-hwan partitioned prescriptions, n=10) groups. Body weights were measured every week. After 7 weeks, fasting blood sugar and oral glucose tolerance tests were conducted. After 8 weeks, blood samples of all mice were taken from their heart and analyzed biochemically. At the same time, epididymal fat pad and liver weights were measured. Histological size of white adipocyte were measured as well. Results : Compared with a HFD group, body weight, fructosamine, epididymal fat pad weight and white adipocyte size decreased. High-density lipoprotein cholesterol levels increased in the SPP group. Conclusions : These results suggest that SPP has antidiabetic and antiobesity effects in high fat, high sucrose diet induced obese mice.

The printing tag for activation of RFID industry (RFID확산을 위한 Printing TAG)

  • Kim, Ji-Tae
    • Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
    • /
    • 2007.11a
    • /
    • pp.109-115
    • /
    • 2007
  • Instead of existing bar code system, RFID is now the core sensor technique of Ubiquitous computing and it will bring a revolution of corporation's logistics systems. In recent years, RFID becomes the center of government and other related companies and furthermore, its basic and applied techniques and have been established as various international standards. Many major countries announced application cases in various fields and concentrate their effort to make new RFID technologies as well. Recently Korean government announced the basic plan of u-Korea and all-out plan of activation of RFID/USN. SO in this paper, we will discuss two things; the trends of RFID technologies and the printing tag technique, which is needed to spread of RFID item units.

  • PDF

A Study on the Bond Strength of Coated Rebar in Concrete (콘크리트중 코팅철근의 부착응력에 대한 기초적 연구)

  • 문한영;김성수;류재석;김성섭
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 1996.10a
    • /
    • pp.127-132
    • /
    • 1996
  • Recently in the country a corrosion of steel is accelerated due to using of sea sand including salts, and critical problem on the durability of concrete structure is occured. Thus a control of steel corrosion is very important in the stability of structure. Coated steel is in use with a method of steps of steel corrosion in U.S,A. Japan etc, and as well in domestic case the manufactured coating steel of three types is on the market. Those are Epoxy coated steel, Zinc-strength, concrete specimen size, bar diameter, which can affect bond characteristics between steel and concrete in order to know their relative bond characteristics.

  • PDF

An Experimental Study on Establishing Criteria of Gripping Work in Construction Site (건설 현장 악력 작업안전 기준 설정에 관한 실험적 연구)

  • 손기상;이인홍;최만진;안병준
    • Journal of the Korean Society of Safety
    • /
    • v.10 no.3
    • /
    • pp.81-95
    • /
    • 1995
  • Now, safety assurance in construction sites should be accomplished by its own organization rather than control of the code or government. It is believed that the safety assurance can be considerably improved by a lecture or an education using the existing theories or literatures up to now, but it is thought that fundamental safety assurance we not able to be accomplished without developing safety devices '||'&'||' equipment or taking fundamental measures, based on the result analyzed from workers behaviors. There are various behaviors of the workers showed in construction site, but only tests for hammerusing works such as form, re-bar, stone workers directly related to the grip strength are mainly performed, investigated and measured here for the study. The above works are similar to power grip, 7th picture on seven items which are categorized for hand grip types(Ammermin 1956 ; Jones ; Kobrick 1958). Measurements of grip strength are commonly taken in anthropometric surveys. They are easy to administer but unfortunately it is rather dubious whether they yield any data that are of interest to the engineer. Very fewer controls of tools are grasped and squeesed studies showed very little overall correlation between grip strength and other measures of bodily strength (Laubach, Kromer, and Thordsen 1972), but hammer-using work which is practically progressed in construction site are mainly influenced with grip strength. According to the investigation on work measurement, it is shown that 77% of form worker are using hammer to be related to grip strength. In this study, it is particularly noticed that wearing safety gloves in construction site is required for workers safety but 20% difference between grip strength with safety gloves and without ones are commonly neglected in the site(Fig. 1). Nevertheless, safety operation with consideration of the above 20% difference is not considered in the construction site. Factors of age, kinds of work, working time, with or without safety gloves are in vestigated '||'&'||' collected at the sites for this study. Test, not at each working hour but at 14 : 00 when the almost all of the workers think the most tired, resulting from the questionaires, also when it is shown on the research report has been performed and compared for main kinds of works : form '||'&'||' re-bar work. Tests were performed with both left SE rightand of the workers simultaneously in construction site using Rand Dynamometer(Model 78010, Lafayette Instrument Co., Indiana, U.S.A) by reading grip strength on the gauge while they are pulling, and then by interviewing on their ages, works, experiences and etc., directly. The above tests have been performed for the dates of 15th march-26th May '95 with consideration of site condition. And even if various factors of ambient temperature on the testing date, working condition, individual worker's habit and worker's condition of the previous ate are concerned with the study. Those are considered as constants in this study. Samples are formwork 53, rebar 62, electrician 5, plumber 4, welding 1 from D construction Co., Ltd, ; formwork 12, re-bar 5, electrician 2, from S construction Co., Ltd, , formwork 78, re-bar 18, plumber 31, electrician 13, labor 48, plumber 31, plasterer 15, concrete placer 6, water proof worker 3, maisony 5 from B construction Co., Ltd. As In the previously mentioned, main aspect to be investigated in this study will be from '||'&'||' re-bar work because grip strength will be directly applied to these two kinds of works ; form '||'&'||' re-bar work, eventhough there are total 405 samples taken. It is thought that a frequency of accident occurrence will be mainly two work postures "looking up '||'&'||' looking down" to be mainly sorted, but this factor is not clarified in this study because It will be needed a lot of work more. Tests has been done at possible large scale of horizontally work-extended sites within one hour in order to prevent or decrease errors '||'&'||' discrepancies from time lag of the test. Additionally, the statistical package computer program SPSS PC+has been used for the study.

  • PDF

Effects of Astragali Radix Herbal-acupuncture at $ST_{36}$ (Jok-samni) on Collagen-induced Arthritis in Mice (황기약침이 Collagen으로 유발된 생쥐의 Arthritis에 미치는 영향)

  • Choi, Bong-Gyun;Cho, Myung-Rae;Kim, Jae-Hong;Ryu, Chung-Ryeol
    • Journal of Acupuncture Research
    • /
    • v.25 no.1
    • /
    • pp.25-55
    • /
    • 2008
  • Objectives : The aim of the present study was to observe the effect of Astragali Radix Herbal-Acupuncture Solution(AR-HAS) at $ST_{36}$(jok-samni, $Z\acute{u}s\bar{a}n$ Li) on collagen- II -induced arthritis(CIA) in mice. Methods : DBA/1J mice were immunized with bovine type II collagen(CII) on days 0 and 21 to induce arthritis. The mice were divided into 5 groups : normal group(no CIA), control group(CIA+no treatment), needle prick group(CIA+single prick with an injection needle), saline group(CIA+saline injection) and ARHA group(CIA+ R-HA treatment). The needle prick, saline injection, and AR-HA groups were injected on the right $ST_{36}$(jok-samni) of mice for 9 weeks, 3 times a week, beginning 4 weeks after the booster immunization. Results : 1. The incidence of arthritis, AI(arthritis index), and joint edema decreased in the AR-HA group. 2. Weight gain, hypertrophy of the spleen, adhesion of the tissues, and transformation of the joint were restrained in the AR-HA group. 3. The concentrations of $IL-1{\beta}$, IL-6, $TNF-{\alpha}$, $IFN-{\gamma}$ in CIA mouse serum and $IFN-{\gamma}$, IL-10 in the CIA mouse spleen cell culture decreased significantly at $ST_{36}$ in the AR-HA group. 4. Total cell counts increased significantly, and the ratio of $CD3e^+$ to $CD45R^+$, $CD4^+$ to $CD8^+$, and $CD4^+$ to $CD25^+$ cells decreased significantly at $ST_{36}$ in the CIA mouse spleen cell culture of the AR-HA group. 5. Total cell counts decreased significantly, and $CD4^+/CD25^+$ and $CD45R^+/CD69^+$ decreased significantly at $ST_{36}$ in the CIA mouse lymph nodes of the AR-HA group. 6. $CD3e^+/CD69^+$ and $CD11b^+/Gr-1^+$ cells decreased significantly at $ST_{36}$ in the CIA mouse joints of the AR-HA group. 7. The histological examination showed that cartilage destruction and synoviocyte proliferation decreased in the CIA mouse joints of the AR-HA group, and collagen fiber was expressed similar to that seen in the normal group. Conclusions : Our experiments show that at $ST_{36}$, an anti-inflammatory mechanism of AR-HA controls synovial cell proliferation and protects against cartilage destruction in rheumatoid arthritis.

  • PDF

The Problem of the Interpretation of the Fû Hexagram[復卦] based on Zhu Xi[朱熹]'s Theory of Psychology (주희(朱熹) 심성론(心性論)을 중심으로 본 복괘(復卦) 해석의 문제)

  • Kim, Kwang-Soo;Kim, Won-Myoung
    • The Journal of Korean Philosophical History
    • /
    • no.52
    • /
    • pp.281-310
    • /
    • 2017
  • This paper is a reflective study of contemporary Korean scholars' claims that they criticize the explanation of Zhu Xi(朱熹, 1130-1200)'s psychology in which he explains that the 24th Hexagram of $F{\hat{u}}$[復卦] shows the state that the mind has not happened yet[未發]. Zhu Xi explains the 24th Hexagram of $F{\hat{u}}$[復卦] with the theory of no mind yet[未發說]. Several scholars in modern Korea, however, raise the question of whether "thoughtless[思慮未萌] but being not dark to perception[知覺不昧]" of the 24th Hexagram of $F{\hat{u}}$ is enough to explain the state of no mind yet. And they think that "thoughtless[思慮未萌]" is appropriate to explain the state in which the mind has not yet occurred, but it is not to "being not dark to perception". In this study, we would like to show that Zhu Xi's interpretation of the 24th Hexagram of $F{\hat{u}}$[復卦] fully explains the fact that "thoughtless[思慮未萌] but being not dark to perception[知覺不昧]" explain the theory of no mind yet[未發說]. Zhu Xi's 'the theory of no mind yet[未發說]' is divided into two periods, a period of 'old theory on $zh{\bar{o}}ngh{\acute{e}}$[中和舊說]' and a period of 'new theory on $zh{\bar{o}}ngh{\acute{e}}$[中和新說]'. He develops 'the theory of no mind yet[未發說]' on the basis of 'the theory that nature is body and mind is action[性體心用說]' during the period of old theory, and develops the theory[未發說] based on 'the theory that mind controls nature and feelings[心統性情說]' during the new theory. Between the two periods, the status of the mind changes from "the mind has already happened[已發]" to "through which the mind has not yet arisen and the mind has already risen[未發已發]". And its role also changes from 'what nature is happened' to 'presiding on nature and emotion.' This change affects the interpretation of the idea that the mind has not yet happened, that thoughts have not budged yet[思慮未萌], perception is not dark[知覺不昧].

A Study on Key Success Factors for the Concept-driven Product Innovation Strategy: a Case of the Slim-Phone development process (컨셉 주도형 제품혁신전략의 성공요인에 관한 연구: (주)VK 슬림폰 개발사례를 중심으로)

  • Son, Seok-Ho;Kim, Yong-Won;Yun, Ji-Eun;Yang, Seung-Hwa;Kim, Jin-U
    • Proceedings of the Korean Operations and Management Science Society Conference
    • /
    • 2006.11a
    • /
    • pp.21-35
    • /
    • 2006
  • This paper examines critical successful elements related to the management of new product development process. For this, we have selected a VK-X100, slim bar type cellular phone, produced by VK mobile co., which was thought as a successful product development case and then analysed the case from a concept driven strategic product development's point of view. We have performed in-depth interviews with project managers, engineers and designers to get information on the product development process and analysed huge amount of data obtained from web-sites, global market indicators, and related firms' materials to find a changing trend of market conditions. The findings suggest that the successful new Product development and management is shaped by a number of different factors, such as the business environments, firm's technological level, firm's deep market insight capabilities, nature of the product development activities, and so on. Finally, we suggested the limitation of our research and further research subjects that would be required to support our findings.

  • PDF

Effects of Ojeoksangamibang Extract on the Recovery of Liver Function in $CCl_4$-exposed Rats (오적산가미방(五積散加味方) 추출물이 $CCl_4$ 중독 Rat의 간기능 회복에 미치는 영향)

  • Lee, Soo-Yeon;Park, Won-Hyung;Cha, Yun-Yeop;Lee, Eun
    • Journal of Korean Medicine Rehabilitation
    • /
    • v.23 no.3
    • /
    • pp.45-53
    • /
    • 2013
  • Objectives The objective of present study was to investigate the effect of Ojeoksangamibang ($W\check{u}j\bar{i}s\check{a}nji\bar{a}w\grave{e}if\bar{a}ng$) extract on recovery of liver function in carbontetrachloride ($CCl_4$)-exposed rat. Methods Male rats weighing $230{\pm}7.21g$ fed experimental diet for 1 week and 28 rats were divided into 4 groups. Each of 7 rats was devided into a control group and experimental groups. We fed a control group of rats a basal diet and administered normal saline (100 mg/kg, 1 time/1 day) for 3 weeks. And we fed each experimental group of rats basal diet and administered an extract of Ojeoksangamibang extracts (100 mg/kg, 200 mg/kg, 300 mg/kg, 1 time/1 day) for 3 weeks. We measured lipid of plasma and liver, concentration of proinflammatory cytokines ($IL-1{\beta}$, IL-6 and IL-10). Statistical analysis was done by one-way analysis of variance (ANOVA) and Duncan's multiple range test with significance level at p<0.05. Results Plasma a-fetoprotein (AFP) and total protein concentration showed a tendency to decrease in Ojeoksangamibang extract-treated groups. However, plasma albumin concentration showed no significant differences in all treatment groups. Activity of plasma Aspartate aminotransferase (AST) and Alanine aminotransferase (ALT) in the Ojeoksangamibang extract-treated groups, increased addition amount of Ojeoksangamibang extracts tended to decline. Alkaline phosphatase (ALP), lactate dehydrogenase (LDH) and ${\gamma}$-glutamyl transferase (${\gamma}$-GT) activities showed a tendency to decrease in Ojeoksangamibang extract-treated groups, increased addition amount of Ojeoksangamibang extracts tended to decline. Concentration of plasma triglyceride and total cholesterol showed a lower value than that of control group. The liver $IL-1{\beta}$, IL-6 and $TNF-{\alpha}$ concentration were decreased, and IL-10 was increased in Ojeoksangamibang extract groups, compared to control group. Plasma $IL-1{\beta}$, IL-6 and $TNF-{\alpha}$ concentration were decreased, and IL-10 was increased in Ojeoksangamibang extract groups, compared to control group. Conclusions This study suggested that Ojeoksangamibang may alleviate liver inflammatory reaction induced by liver toxicity.

폐목재 재활용 분진의 화재폭발위험성

  • Lee, Su-Hui;Han, U-Seop;Han, In-Su
    • Proceedings of the Korea Institute of Fire Science and Engineering Conference
    • /
    • 2013.04a
    • /
    • pp.115-115
    • /
    • 2013
  • 최근의 분진폭발은 플라스틱, 의약품, 목재, 곡물 저장고, 고체연료, 화학제품 제조공정 등을 포함하여 성형 및 가공 공정 등에서 화재폭발사고가 발생되고 있다. 폐목재를 재활용하여 PB(Particle board)를 생산하는 국내 제조사업장에서는 화재폭발 사고가 빈번히 발생하고 있어 예방대책이 요구되고 있다. 본 연구에서는 폐목재 제조공정의 사고예방과 목재분진 취급공정에 대한 안전대책 등을 제시하기 위하여 사고원인 물질인 폐목재 부유분진의 폭발특성실험을 실시하고 실험결과를 검토하였다. 또한 폐목재 분진의 화재폭발위험성을 상세히 평가하기 위하여 해당 물질의 자연발화점, 축열저장시험, 및 최소점화에너지 등의 화재폭발위험특성값을 실험적으로 조사하였다. 본 연구에서 사용한 폐목재 시료의 비구형 입자형태를 가지는데 입도분석기의 측정 결과 평균 입경은 $15.96{\mu}m$로 조사되었다. 또한 목재 분진의 함수율은 3.88%이며 중금속함유량은 1.73%이다. 자연발화점 측정결과 $225.5^{\circ}C$로서 비교적 낮게 측정되었고 퇴적분진에 대한 화재의 위험성은 높게 나타났다. 반면에 축열저장시험 결과를 통하여 공정관리 온도 및 보관온도를 $150^{\circ}C$ 이하로 관리하면 축열에 의한 자기분해 위험성은 낮은 것으로 판단되었다. 그러므로 축열에 의한 화재폭발 등의 위험성은 낮은 것으로 사료 된다. 최대폭발압력($P_{max}$)은 8.7 bar이며 폭발하한농도 (LEL)는 $60g/m^3$으로 나타났다. 부유분진의 폭발특성실험 결과 분진폭발지수(Kst)는 폭발등급 St 1 (0$bar{\cdot}m/s$)으로 나타났으며 폭발에 의한 위험성이 약한 분진으로 판정되었다. 최소점화에너지(MIE)는 10mJ < MIE <30mJ의 범위로 측정되었으며, 계산에 의해 추정된 최소점화 에너지(Es) 값은 14 mJ로서 일반적인 발화감도(Normal ignition sensitive)로 분류되었다. 이는 실질적인 점화원만 제거하여도 분진폭발을 예방할 수 있다는 것을 의미한다. 그러나 분진 폭발사고를 예방을 위하여 MIE값이 공정운전온도 $100^{\circ}C$ 초과 시에 급격히 낮아질 수 있으므로 운전 온도 설정에 있어서 주의가 필요하다.

  • PDF