• International Journal of Highway Engineering
• /
• v.6 no.4 s.22
• /
• pp.45-53
• /
• 2004

This study dealt with correlation analysis between deformation strength and rut resistance of asphalt concretes based on binder grade in Superpave specification with changing submerging time. Currently, Mashall mix design is known to have little correlation with rutting related performance. Therefore, some agencies started to use the Superpave method for asphalt mix design. But this method has a weak point in that it can not distinct mechanical property of the asphalt mixtures designed. For solution of these problem, this study used deformation strength, $S_D$, of Kim test which is a new approach under development for finding property which represents rut resistance characteristics of asphalt mixtures under static loading. This study used two aggregates from two regions and five PG asphalt binders. Final rut depth (DR) and dynamic stability (DS) from wheel tracking (WT) test were obtained. and $S_D$ value of the same mixture specimen which was made by gyratory compactor was obtained using loading head [4(1.0)]. Three submerging times 30min, 40min, 50min were used as a test variable at $60^{\circ}C$. Correlation analysis of DR and DS with $S_D$ were performed based on PG grade. It was found out that the $S_D$ has a high correlation with DR and DS of superpave mixtures. The highest $R^2$ was found from the $S_D$ values of 30min. submerged specimen.

• 한국도로학회:학술대회논문집
• /
• 2003.10a
• /
• pp.229-234
• /
• 2003

• 한국도로학회:학술대회논문집
• /
• 2008.10a
• /
• pp.83-86
• /
• 2008

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.347-350
• /
• 2000

Enzymatic deinking of office-waste paper was studied using crude cellulase and papain-hydrolyzed cellulase from Trichoderma reesei Rut C-30 in small-scale and mid-scale. The results were compared with deinkings using commercial enzyme(Novozym 342) and conventional chemical methods. Maximum brightness and freeness were obtained at 3 units/g Oven Dry Paper(ODP) of CMCase activity using crude cellulase in mid-scale deinking experiments. The deinked pulp had higher physical strength and brightness, and lower freeness and yield than the pulp deinked in small scale. In small scale deinking, maximum brightness and freeness were obtained at 2 unit/g ODP. Deinking by papain-hydrolyzed cellulase showed similar results with one by Novozym 342. It was better in brightness and freeness, but showed lower physical strength and yield, than the conventional deinking by sodium hydroxide. The ratio of endo-1,4-glucanase and exo-1,4-glucanase components in papain hydrolyzed cellulase from T. reesei Rut C-30 was similar to that of commercial enzyme, Novozym 342, implicating a successful application as a deinking enzyme.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.2
• /
• pp.229-233
• /
• 2001

Trichoderma reesei Rut C-30 produced high levels of ${\beta}$-glucosidase, endo-${\beta}$-glucosidase, endo-${\beta}$-1,4-glucanase, and exo-${\beta}$-1,4-glucanase. In pilot-scale production (50-1 fermentor), productivity and yield of CMCase (carborymethyl cellulose) and FPase (filter paper activity) were 273 U/ml and 35 U/ml, and 162 FPU/l.h and 437 FPU/g, respectively. The fed-batch techniques were used to improve enzyme activities with constant cell concentration. The acidity was an important parameter and controlled at pH 3.9 and 5.0 by automatic addition of ammonium hydroxide. Cellulase powder was prepared by ammonium sulfate precipitation and its CMCase and FPase activities were 3,631 U/g and 407 U/g, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.1
• /
• pp.44-49
• /
• 1999

Cellulase production by fed-batch cultivation of Trichoderma reesei Rut C30 with various initial concentrations of Solka Floc in 1 % wheat bran-containing medium was investigated. The cellulase activity and productivity increased with initial Solka Floc concentration up to 5%. When a total Solka Floc concentration of 90 g/l was used for cellulase production, CMC (carboxymethyl cellulose) and FP (filter paper) activities, productivity, and yield were 359.7 U/ml, 30.61 U/ml, 161 FPU $L^{-1}$ $h^{-1}$, and 340 FPU $g^{-1}$, respectively. It was important to maintain a high cell concentration during cellulase production to obtain high cellulase activity and productivity. Cellulase powder was prepared by ammonium sulfate precipitation: FP activity was 396.7 U/g and CMC activity was 6481 U/g.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.1-8
• /
• 2014

PURPOSES : Analysis and design of asphalt concrete (AC) and continuously reinforced concrete (CRC) composite pavements. METHODS : In this study, the service life of the AC/CRC composite pavements was determined based on the probabilistic method in the mechanistic-empirical pavement design guide(MEPDG). Typical pavement design was provided with respect to heavy truck traffic volume of highways. RESULTS : The service life of the composite pavements based on IRI was shorter than that based on rutting at lower traffic volume, but this trend was switched at higher traffic volume. CONCLUSIONS : It is concluded that the main distress affecting the service life of the composite pavements was longitudinal roughness and rutting. Roughness became lower, but rut depth became greater as the stiffness of the CRC increased.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.3
• /
• pp.208-213
• /
• 1998

The effect of the addition of wheat bran to the growth medium on the production of cellulolytic enzymes of Trichoderma reesei Rut C30 was studied in batch culture using shake flasks. The activity of cellulase was enhanced by the addition of wheat bran to the cellulase production medium. $KH_2PO_4$-$K_2HPO_4$ buffer was used for pH control during cellulase production. As a result, high cellulase activities were obtained in shake flask culture; a CMC (carboxymethyl cellulose) activity of 125.78 U/ml was obtained from 2% Avicel- and 3% wheat bran-containing medium and an FP (filter paper) activity of 12.85U/ml was obtained from 1% Avicel- and 5% wheat bran-containing medium after 6 days of cultivation.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.5
• /
• pp.359-364
• /
• 2006

Industrial Agitators are used in various industrial fields where they are necessary to intimately mix two reactants in a short period of time. However, despite their widespread use, complex unsteady flow characteristics of industrial mixers are not systematically investigated. The present study aims for clarify unsteady flow characteristics induced by various impellers in agitator's tank. Impellers are Pitched blade turbine(PBT) types, Screw type and Rushton turbine type(RUT). In this study is numerical analysis of the Industrial agitator's Impeller types. The rotating speed of impellers fixed about 100RPM. Numerical analysis results show that differential flow characteristics of each type Impeller and Rushton turbine type(RUT) is suitable for mixing powder.

• 한국도로학회:학술대회논문집
• /
• 2002.10a
• /
• pp.67-74
• /
• 2002