• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.3
• /
• pp.163-169
• /
• 1991

Sixty seven regular wave tests were performed in a wave-current flume to investigate proper-ties of waves breaking on irregular slope profiles. In these tests, 1/10, 1/20 beach slopes were made using angles and plywoods. A little differences were found in such properties as breaker depth and height indices. runup for plane slopes comparing with other laboratory experiments. however. for smaller deepwater wave steepness, measured breaker height and depth data values were smaller than other formulas. On wave runup agreement was good between experiments and Hunt formula. however. measured data values were influenced by number of breaking. Significant differences were found in breaker depth index for plane and barred slopes. Wave height decay after breaking was found to be smaller than Dally et al.'s formula (1984).

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.10 no.1
• /
• pp.45-53
• /
• 1998

Video monitoring techniques and their applications to beaches were reviewed. The recent development of video hardware and image process made it possible to measure shoreline changes, sandbar morphology, wave runup, swash motion, and so on using video camaras. Especially, quantitative information from the video image can be obtained by digitization of image, rectification procedure, and image process. Using video monitoring techniques, measurements can be made at much lower cost and for long periods of time compared to the traditional measurement techniques, although these techniques are of lower accuracy and provide only indirect information on the land and water surface.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1707_1708
• /
• 2009

Unit master control(UMC)는 발전소의 요구 부하신호를 설정하는 최상위의 제어레벨이며 UMC의 설정값은 자동급전 지령신호(Automatic Dispatch System : ADS) 또는 운전원이 설정하는 값에 따라 보일러 및 터빈 Master에 Unit 요구 신호를 출력하여 하위제어 레벨인 공기, 연료, 급수 등을 조절할 수 있는 기기에 Unit 부하 요구 신호(Unit Load Demand : ULD)에 따라 제어 되도록 하는 방법으로서, Unit 목표부하 설정, Unit 목표부하 상/하한 제한, 목표부하 변화율 제한, 주파수 보정, Runback/Rundown/ Runup, 보일러 및 터빈 Demand 신호생성의 기능을 가지고 있다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.4
• /
• pp.404-412
• /
• 1994

On July 12. 1993 at 22 : 17 local time (-9h. KST). an earthquake of surface magnitude (MS) 7.6 occurred on the west coast of the Hokkaido and small of offshore island of Okushiri in the East Sea. A major tsumani was generated and within 2 to 5 minutes, extremely large tsunami waves engulfed the Okushiri coastal area and the central west roast of the Hokkaido. This tsunami caused tremendous casualities and damage. A giant tsunami runup of more than 30 m in height was recorded. The tsunami crossed the East Sea and feeled at 27 sites of the eastern Korean coast during the survey on 17-19, July, 1993. The observed tsunami runup at southern part of the eastern Korean coast were generally weaker than the 1993 Japan Sea Central Earthquake tsunami and varied from 0.8 m to 2.6 m. The Present Paper intends to understand the propagation on this tsunami with the aid of numerical computation model andd computer graphic aided video animation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.574-578
• /
• 2006

Tidal amplification by construction of the sea-dike and sea-walls had been detected not only near Mokpo Harbor but also at Chungkye Bay which is connected with Mokpo Harbor by a narrow channel. This brings about increase of tidal flat area and in particular increase of surge-wave combined runup during storms. The purpose of this study is to examine an efficient operational model that can be used by civil defense agencies for real-time prediction and fast warnings on wind waves and storm surges. Instead of using commercialized wave models such as WAM, SWAN, the wind waves are simulated by using a new concept of wavelength modulation to enhance broader application of the hyperbolic wave model of the mild-slope equation type. Furthermore, The predicting system is composed of easy and economical tools for inputting depth data of complex bathymetry and enormous tidal flats such as Mokpo coastal zone. The method is applied to Chungkye Bay, and possible inundation features at Mokpo Harbor are analyzed.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.6 s.73
• /
• pp.35-40
• /
• 2006

In recent years, there's been strong demand for seawalls that havea gentle slope and permeability that serveswater affinity and disaster prevention from wave attack. The aim of this study is to examine wave transformation, including wave run-up that propagates on the coastal structures. A numerical model based on the weak nonlinear dispersive Boussinesq equation, together with the unsteady nonlinear Darcy law for fluid motion in permeable layer, is developed. The applicability of this numerical model is examined through Deguchi and Moriwaki's hydraulic model test on the permeable slopes. From this study, it is found that the proposed numerical model can predict wave transformation and run-up on the gentle slope with a permeable layer, but can't show accurate results for slopes steeper than about 1:10.

• Ocean Systems Engineering
• /
• v.12 no.4
• /
• pp.439-459
• /
• 2022

This paper describes experimental studies of impact pressure generated by breaking regular waves in shallow water on a vertical cylinder. Experimental work was carried out in a shallow water flume using a 1:30 - scale model of a vertical rigid circular hollow cylinder with a diameter 0.2 m. This represents a monopile for shallow water offshore wind turbines, subjected to depth induced breaking regular waves of frequencies of 0.8 Hz. The experimental setup included a 1 in 10 sloping bed followed by horizontal bed with a constant 0.8 m water depth. To determine the breaking characteristics, plunging breaking waves were generated. Free surface elevations were recorded at different locations between the wave paddle to the cylinder. Wave impact pressures on the cylinder at a number of elevations along its height were measured under breaking regular waves. The depth-induced wave breaking characteristics, impact pressures, and wave run-up during impact for various cylinder locations are presented and discussed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.506-506
• /
• 2023

지진해일은 대규모 인명피해는 물론 가공할만한 파괴력으로 해안시설물, 즉 원자력발전소, 항만시설물, 연안공항 등을 파괴시킬 수 있다. 따라서 해안에 국가기간시설물을 건설할 때는 반드시 급습 가능한 지진해일을 설정하여 예기치 못한 지진해일의 급습에 대하여 안전한가 여부를 검토해야 한다. 본 연구에서는 부산광역시에 건설 예정인 가덕도 신공항에 대하여 지진해일 급습 가능성을 예측한다. 기존의 수치모형을 이용하여 공항부지에 영향을 끼칠 가능성이 높은 지진해일을 설정하여 수치해석을 수행하고 안전 여부를 검토한다. 본 연구에서 고려된 지진해일은 기 발생한 역사 지진해일과 발생 가능한 지진해일, 즉 가상 지진해일 등이며, 수치모형은 우리나라에서 많이 사용되고 있는 전파모형과 범람모형인 HYCEL-NAMI와 HYCEL-RUNUP을 결합하여 사용한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3B
• /
• pp.289-301
• /
• 2009

In this work, wave run-up heights and resultant wave forces on a vertical revetment due to tsunami (solitary wave) are investigated numerically using a numerical wave tank model called CADMAS-SURF (CDIT, 2001. Research and Development of Numerical Wave Channel (CADMAS-SURF). CDIT library, No. 12, Japan.), which is based on a 2-D Navier-Stokes solver, coupled to a volume of fluid (VOF) method. The third order approximate solution (Fenton, 1972. A ninth-order solution for the solitary wave. J. of Fluid Mech., Vol. 53, No.2, pp.257-271) is used to generate solitary waves and implemented in original CADMAS-SURF code. Numerical results of the wave profiles and forces are in good agreements with available experimental data. Using the numerical results, the regression curves determined from the least-square analysis are proposed, which can be used to determine the maximum wave run-up height and force on a vertical revetment due to tsunami. In addition, the capability of CADMAS-SURF is demonstrated for tsunami wave forces acting on an onshore structure using various configuration computations including the variations of the crown heights of the vertical wall and the position of the onshore structure. Based on the numerical results such as water level, velocity field and wave force, the direct effects of tsunami on an onshore structure are discussed.

• Journal of Navigation and Port Research
• /
• v.35 no.9
• /
• pp.755-763
• /
• 2011

Recently, extreme tsunami waves generated by submarine earthquake have caused tremendous damages to the coastal cities and ports. Strong seiche oscillations and runups are observed in specific sea areas around the world. Although no frequent impacts to the coast of Korean peninsula, there exist some important events in the east of Korea in the past. This study focuses on two historical events and recalculate with different fault and rupture mechanism for prediction considering the recent trend of submarine earthquake. The present study of the 1983 Akita tsunamis demonstrates the multi-scale resonance along continental coasts. Together with the Nankai tsunami for inland sea, we have confirmed the inland sea resonance surrounded by islands in defining the impact along the coast. Coherence and wavelet analyses for deducing a predominant period and time frequency are useful in reasoning the inundation. The resonance modes, which are largely independent of the tsunami source, allow identification of at-risk communities and infrastructure for mitigation of tsunami hazards. Furthermore, understanding of the resonance and the predicted runups for the site of power plant and industrial complex in the east coast of Korea would allow better preparation for the future disasters.