• The Journal of the Korea Contents Association
• /
• v.7 no.6
• /
• pp.9-21
• /
• 2007

In this paper, the hybrid methods are suggested, which use the direction angle information to present running trajectory and track the past locations through a small amount of vehicle's location information. In order to prove the effectiveness of the new technique suggested here, vehicle's location information are collected by running the vehicles moving objects under various conditions. Using the location informations and direction angle information collected with time intervals, the vehicl e's location information is abstracted, compared and analyzed. and I have proved that the suggested techniques are more effective by comparing them with others in various methods such as GPS TrackMaker, difference image techniques, consistency comparison, quantity comparison, vehicle's running distances and so on.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.337-342
• /
• 2011

Vehicle dynamic behavior should be investigated to establish the track irregularity criteria because they have an impact on vehicle dynamic behavior. The influence of twist on running behavior and safety for KTX was instigated by numerical analysis among track geometry quality parameters such as vertical alignment, lateral alignment, twist and track gauge in this paper. The wavelength and amplitude of twist were considered in scenario of this numerical analysis. This research is based on just numerical analysis and the final result which include measurement will be published in the future.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.58-62
• /
• 1989

Magnetic levitation railway is being developed as an advanced ground transport system which is high speed and has less environmental pollution. In this paper, the effectiveness of the proposed controller is proved by a vehicle body's curvature running characteristics. We select two types of transition curves for investigation, namely clothoid and sine.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.481-484
• /
• 2008

The important factor to evaluate the running safety of a railway vehicle would be the interaction force between wheel and rail(derailment coefficient), for which is one of important factors to check the running safety of a railway vehicle that may cause a tragic accident. Element that analyze derailment coefficient is consisted of wheel load and lateral force. In this paper, studied about method that calculate vertical force(wheel load) by bending load of axle in rolling stocks.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.702-706
• /
• 2009

Internal running noise of a vehicle running in open field is the summation of air borne noise and structure-borne noise. In this paper vibration damping characteristics of carbody are investigated to see the effect of sound-deadening paint on the internal running noise. By using SEA method, vibration levels of complete train with and without sound-deadening paint are estimated and structure borne noise levels are estimated.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1347-1350
• /
• 2005

Recently, as the road capacity reaches a limit and environmental problems become serious, there exists a gradual increasing need for railway vehicles that are environment-friendly, punctual, reliable and safe. Accordingly, in addition to conventional railroad vehicles, lots of vehicles are being newly developed. Using the developed installed measurement system, the performance characteristics of railway vehicle could be monitored precisely. After recording the input real time data of each signal from railway vehicle to the network line, we could acquire the needed information through post processing program. We could verify the running performances of railway vehicle using this system. As a result, many latent defects have been found and corrected in the prototype train. The measurement systems have contributed to dramatic reduction of the developing period.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1587-1591
• /
• 2009

Safety of railroad is result of reliability which is received from test & evaluation of system. Railroad system is consisted of various sub system such as vehicle, supply of electric power, signal, communication, rail track construction, operation. To secure safety of railroad, evaluation about parts, assembly, sub system, whole system etc.. that compose railroad is essential. In this paper, I wish to describe for results that analyze korean tilting vehicle's derailment coefficient developed by national research achievement. Result that evaluation korean tilting vehicle's running safety, verified that secure even if speed-up 30 km/h than operating speed of present in curved track.

• Proceedings of the KSR Conference
• /
• 2002.10b
• /
• pp.1041-1046
• /
• 2002

A railway open deck plate girder bridge without ballast should support relatively heavier vehicle loads compared with its self-weight. For such a reason, actual dynamic response of the bridge is considerably differing with normal prediction because additional masses added from vehicle to a bridge have an effect on the dynamic characteristics of the bridge. These differences affect to the estimation of a natural frequency change that adopted for one of the evaluation technique of strength decrease, and these make trouble to the analysis of a natural frequency from the field test data that measured at the bridge subjected to a running vehicle. In this study, classification of mass participation ratio for each component of open deck plate girder bridge without ballast and the comparison according to the change of vibration characteristics for the case of subjected to a running vehicle were accomplished.

• Journal of the Korean Society of Safety
• /
• v.28 no.1
• /
• pp.63-73
• /
• 2013

Dynamic strain history curve measured in the field is influenced by various factors such as vehicle type, speed, noise, temperature and running location etc.. Because such curve is used for vehicle weight estimation methodology suggested by Moses, exact strain history curve is the most important thing for exact estimation of vehicle weight. In this paper, effect of such factors mentioned above is investigated on the measured strain history curves, and results of weight estimation of vehicles are discussed quantitatively. From this study, it was known that temperature effect contained in the strain history curve measured for long time in-site gives the biggest effect on result of weight estimation and it can be removed by using the mode value. Furthermore, gross vehicle weight can be estimated within 5% error corresponding to A class of the European classification if effects of temperature and noise are removed and vehicle properties such as speed, axle arrangement and running location are considered properly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.541-549
• /
• 2018

This paper deals with the braking dynamic behavior of diesel electric locomotive pulling domestic cargo and passenger vehicles. Friction coefficient, pneumatic pressure, and running resistance affecting the braking system were tested. For the friction coefficient, the Dynamo test was performed with reference to UIC 541-4. The results are analyzed by multivariate regression and the relationship between braking force and ititial velocity is presented. The pneumatic pressure were classified into service braking and emergency braking. In order to reflect the characteristics of the brake valve and piping, the pressure rising over time was measured in the vehicle. In order to reflect the external force acting on the vehicle, we carried out the test of EN 14067-4 and presented the second order polynomial formula on a running resistance. The running resistance test results were compared with other countries. The dynamic behavior of a diesel electric locomotive running on a straight flat track based on vehicle resources, friction coefficient, braking pressure, and running resistance is simulated using the time integration presented in EN 14531-1. The simulation results were compared and verified with the vehicle braking test results. The results of this study can be used to analyze the dynamic braking behavior of a train. Also, it is expected that various parameters affecting braking in vehicle design can be analyzed and used as basic data for braking performance improvement.