KIM, SEUNG-JUN;CHOI, YOUNG-SEOK;CHO, YONG;CHOI, JONG-WOONG;HYUN, JUNG-JAE;JOO, WON-GU;KIM, JIN-HYUK
Transactions of the Korean hydrogen and new energy society
/
v.31
no.3
/
pp.328-336
/
2020
In the Francis turbine, the leakage flow through the runner gaps which are between the runner and the stator structure influences the internal flow and hydraulic performance. Thus, the investigation for the flow characteristics induced by the runner gaps is important. However, the runner gaps are often disregarded by considering the time and cost of the numerical analysis. Therefore, in this study, the flow characteristics according to runner gaps of the Francis turbine model were investigated including the leakage flow of the runner cone. The three-dimensional unsteady Reynolds-averaged Navier-Stokes analyses were conducted using a scale-adaptive simulation shear stress transport as a turbulence model for observing the influence of the leakage flow on the internal flow and hydraulic performance. The efficiencies were decreased slightly with runner gaps; and the complicated flows were captured in the gaps.
International Journal of Fluid Machinery and Systems
/
v.9
no.1
/
pp.47-55
/
2016
The portable hydraulic turbine we previously developed for open channels comprises an axial flow runner with an appended collection device and a diffuser section. The output power of this hydraulic turbine was improved by catching and accelerating an open-channel water flow using the kinetic energy of the water. This study aimed to further improve the performance of the hydraulic turbine. Using numerical analysis, we examined the performances and flow fields of a single runner and a composite body consisting of the runner and collection device by varying the airfoil and number of blades. Consequently, the maximum values of input power coefficient of the Runner D composite body with two blades (which adopts the MEL031 airfoil and alters the blade angle) are equivalent to those of the composite body with two blades (MEL021 airfoil). We found that the Runner D composite body has the highest turbine efficiency and thus the largest power coefficient. Furthermore, the performance of the Runner D composite body calculated from the numerical analysis was verified experimentally in an open-channel water flow test.
In injection molding process, the runner system of the mold is a flow path for filling the cavity of the molded part during the advance of the screw by the force of the hydraulic cylinder, which involves the filling and packing process of the molten resin. Thus, the sprue, runner and gate greatly affect the appearance of the molded part, the physical properties of the resin, the dimensional accuracy and the molding cycle etc. Feed systems with incorrect runner and gate designs cause various molding defects, So it is important to maintain the optimum runner balance to prevent these defects. In order to improve the knowledge of practical mold technology, which is applied to the manufacturers of injection molds, a training model of the mold technology process is presented based on the technical guidance on the technical difficulties.
Small injection molded articles are generally molded by multi-cavity injection molding. The most important thing in multi-cavity molding is flow imbalance among the cavities because it affects the physical property and the quality of products. The cavity filling balance can be achieved by flow balance in the runner through the thermal balance. In this study, novel screw type runner or helical type runner has been developed for the flow balance in the runner and performed experiment and computer simulation. Flow balance has been observed using various screw type runners for several resins such as amorphous and crystalline polymers including low and high viscosities grades. Flow balance experiments have been performed for various injection speeds since the flow balance can be affected by injection speed among the injection conditions. Experimental results have been compared with computational results and they showed good agreement. The cavity filling balance can be achieved by the screw runner where the temperature distribution is uniform through the circulation flow along the screw channel in the screw runner. It has been verified that the novel screw runner is very effective device in flow balance in the multi-cavity injection molding. cavity filling imbalance, multi-cavity injection molding, runner design, screw runner, thermal balance.
Kim, Dae-Young;Kim, Su;Kang, Yun Im;Yun, Hyung Kweon;Yoon, Moo Kyoung;Kim, Tae Il;Choi, Jong Myung
Journal of Bio-Environment Control
/
v.21
no.4
/
pp.385-391
/
2012
This study was conducted to investigate the effects of the runner cutting time on the growth and yield of strawberry (Fragaria ${\times}$ ananassa cv. Maehyang and Seolhyang) during nursery period of two consecutive years (2009 and 2010). Strawberry runners which connected from mother plants to daughter plants were cut 30, 20, 10 and 5 days before transplanting day (11 Sep. 2009 and 10 Sep. 2010). When runner cutting time delayed, more nutrition was supplied to the daughter plant until late nursery period. It showed that there was a tendency to increase the fresh weight, crown diameter and leaf chlorophyll content. On the other hand, when the runner was cut earlier, the growth of underground part such as root weight was improved. Irrigation demand increased to 29.7% in case of runner cutting from mother plant compared with runner non-cutting treatment. In addition, infection ratio of anthracnose through runner part was 37.6% higher in case of runner cutting than that of runner non-cutting treatment. After transplanting, budding and flowering period were delayed up to 2 or 3 days because of late runner cutting. But there was no significant difference in marketable fruit yield among runner cutting times. It is recommended to conduct runner cutting 5 or 10 days before transplanting for reducing the occurrence of anthracnose.
To obtain the fundamental informations on the varietal improvement of peanut and to study the ecological variations of the important agronomic traits and to the relationship between the traits studied, an investigation was made on varietal classification of 489 introduced on the basis of their morphological and ecological differences at Crop Experiment Station, Suweon in 1968, and the other study conducted at some location as above in 1969 was to investigate the ecological variations of the materials in accordance with changes of seeding date using classified varietal group under 5 different seeding times from April 16 to July 7 with twenty days interval. The results obtained were summarized as follows: 1. Peanut varieties tested were classified into Spanish, Virginia Erect, Virginia Runner, Southeast Runner. Valencia and Semirunner, on the basis of plant type, flowering time, number of grains per pod and grain size. 2. Characteristics of varietal group classified are as followings. (1) Spanish; erect, small grained and early maturing type. (2) Virginia Erect; erect, large grained and late flowering type. (3) Virginia Runner; runner, large grained and late maturing type. (4) Southeast Runner; runner, small grained and early maturing type. (5) Valencia; erect, small grained and early flowering type with 3-4 grains per pod. (6) Semi runner; semirunner, large grained and late flowering type. 3. Flowering period in respective varietal group was consistently shorted by delayed seeding date and the degree of shortening was more serious in late flowering varietal group. 4. Number of branches per plant was generally decreased in late seeding date in respective group. However, Spanish and Virginia Runner exhibited lower number of branches in the first seeding rather than the second seeding and the lowest number of branches was found in Spanish while the highest were Virginia Erect in all seeding date. 5. Shelling ratio was high in Spanish and Southeast Runner in any seeding date and decreased remarkedly by seeding after May. 6. Number of pod per plant in all varietal groups was remarkedly decreased by delayed seeding date and the degree of decreasing was more serious in large grain varietal group. 7. The higher pod weight per plant was found in second seeding date rather than first seeding and pod weight per plant was decreased obviously in all late seeding after the second. Therefore, among the cultivars tested, Southeast Runner noted the highest pod weight per plant while Virginia Runner showed the lowest. 8. Grain number per plant expressed the similar tendency as the pod weight per plant but was low in large grain group and high in small grain group in all seeding date employed. 9. 100 grain weight was heaviest in second seeding and was decreased remarkedly after the second and even the first seeding date. 10. Yield per 10a noted considerable variations in accordance with seeding date in all groups classified. However, the yield was increased in second seeding date (May 7) and decreased in the others. 11. Length of main stem and branches were exceptionally decreased in the first seeding date compare to the second in Spanish while other varieties were tend to be same between the indicated seeding date, but. these two traits were strikingly decreased in all seeding after the second. This tendency, however, strongly suggested the importance of environmental effects on peanut growth in terms of their changes due to the different seeding date. 12. Highly significant positive correlations were showed between yield and yield componets such as pod weight per plant, 100 grain weight and the number of grains per plant in all varietal groups except, Virginia Runner. However, the other characters were almost not correlated with yield and differences in correlation coefficients among the seeding dates were found. 13. Path coefficients estimated for yield components to yield was higher in number of grains per plant pod weight per plant and 100 grain weight in terms of direct effect and the other components were negligible in all varietal groups. 14. Heritabilities estimated were generally high in pod number per plant, shelling ratio, 100 grain weights and number of grains per pod and the other traits were relatively low.
This research was conducted to determine the performance of a two-stage vortex turbine with a free water surface. The performance of the two-stage runner was studied by varying the flow rate and the position of the runner in the cylindrical vortex chamber. The experimental results showed that the performance parameters such as torque, voltage, current, and rotational speed increased with increasing flow rate. The runner depth ratio has a significant impact on the performance of the two-stage vortex turbine. The highest power generated by the two-stage runner occurred in the range of 0.054 to 0.162 runner depth ratio near the orifice. The power output of the two-stage runner was higher than that of the single runner due to more vortex and blade contact area in the flow range of 7.2 to 7.7 L/s.
During the injection molding process an excessive packing can occur in the smaller volume cavity because of volumetric difference of the family-mold. It causes warpage by increased residual stress in the product and flesh by over packing. In this study, we used a variable-runner system for the filling balance of the cavities by changing the cross-sectional area of a runner, and confirmed the filling imbalance by temperature and pressure sensors. We carried out experiments to examine the influence of types of resins such as LDPE/ABS/PA6,6 on the filling balancing of the system, in order to help mold designers, who can easily adopt the variable-runner system to their design. We also examined filling imbalance in the system with CAE analysis.
International Journal of Fluid Machinery and Systems
/
v.4
no.2
/
pp.289-306
/
2011
In the development of very high head pumped storage projects, one of the critical problems is the strength of pumpturbine runners. Data obtained by stress measurements of high head pump-turbine runners indicated that dynamic stress due to the vibration of runner might be detrimental, possibly to cause fatigue failure, if the runner were designed without proper consideration on its dynamic behaviour. Numerous field stress measurements of runners and model tests conducted with hydrodynamic similarity revealed that the hydraulic excitation force developed by the interference of rotating runner blades with guide vane wakes sometimes would induce such heavy vibration of runner. Theoretical and experimental investigations on both the hydraulic excitation force and the natural frequencies of runner have been conducted to explore this forced vibration problem.
Science fiction films touch coming-future themes, particularly those referring specifically to futuristic technology and its influence over human life. Dealing with the resistance of the replicants in the approaching millennium, Blade Runner brings the feat of modern civilization into doubt through the image of the dystopian future. In Blade Runner, a city is filled with waste, pollution, and dirt and a corrosive rain falls from the polluted clouds. Adorno criticizes contemporary society and its civilization. Characterizing advanced capitalist society by its total administration penetrating into every sphere of life, he contends that modern society promotes alienation, atomization, conformism, and fatalism. Blade Runner provides a chance to contemplate the problems of modern society, proposed by Adorno's critical works. Therefore, this paper attempts to analyze futuristic characteristics described in the film with Adorno's critique of modern society.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.