• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.6
• /
• pp.617-624
• /
• 2011

The two-dimensional sloshing problem in a rigid rectangular tank with a free surface is considered. The flow is generated by a container in harmonic motion in time along the horizontal axis, i.e., a container excited by u=Asin($2{\pi}ft$) where u denotes the container velocity imposed externally, A is the amplitude of the oscillation velocity, and f is the frequency of oscillation. Experimental apparatus is arranged to investigate the large-amplitude sloshing flows in off-resonant conditions, where the large amplitude means that A~O(1), and the distance, S, is comparable to the breadth, L, of the container, i.e., L/S~O(1). Comprehensive particle image velocimetry (PIV) data are obtained, which show that the flow physics of the nonlinear off-resonant sloshing problem can be characterized into three peculiar free surface motions: standing-wave motions similar to those of linear sloshing, a run-up phenomenon along the vertical sidewall at the moment of turn-over of the container, and gradually propagating bore motion from the sidewall to the interior fluid region, like a hydraulic jump.

• Progress in Medical Physics
• /
• v.27 no.4
• /
• pp.272-276
• /
• 2016

To investigate the optimum x-ray tube design for the dental radiology, factors affecting x-ray beam characteristics such as tungsten target thickness and anode angle were evaluated. Another goal of the study was to addresses the anode heel effect and off-axis spectra for different target angles. MCNPX has been utilized to simulate the diagnostic x-ray tube with the aim of predicting optimum target angle and angular distribution of x-ray intensity around the x-ray target. For simulation of x-ray spectra, MCNPX was run in photon and electron using default values for PHYS:P and PHYS:E cards to enable full electron and photon transport. The x-ray tube consists of an evacuated 1 mm alumina envelope containing a tungsten anode embedded in a copper part. The envelope is encased in lead shield with an opening window. MCNPX simulations were run for x-ray tube potentials of 70 kV. A monoenergetic electron source at the distance of 2 cm from the anode surface was considered. The electron beam diameter was 0.3 mm striking on the focal spot. In this work, the optimum thickness of tungsten target was $3{\mu}m$ for the 70 kV electron potential. To determine the angle with the highest photon intensity per initial electron striking on the target, the x-ray intensity per initial electron was calculated for different tungsten target angles. The optimum anode angle based only on x-ray beam flatness was 35 degree. It should be mentioned that there is a considerable trade-off between anode angle which determines the focal spot size and geometric penumbra. The optimized thickness of a target material was calculated to maximize the x-ray intensity produced from a tungsten target materials for a 70 keV electron energy. Our results also showed that the anode angle has an influencing effect on heel effect and beam intensity across the beam.

• Archives of Plastic Surgery
• /
• v.36 no.2
• /
• pp.140-146
• /
• 2009

Purpose: Autologous breast reconstruction with abdominal tissue is one of the best options after mastectomy. In a free transverse rectus abdominis myocutaneous(TRAM) or deep inferior epigastric artery perforator(DIEP) flap, a preoperative evaluation of the precise location of perforating vessels and vascular run - off systems is required. The objective of this report is to demonstrate the usefulness of multidetector computed tomography(MDCT) in the preoperative planning of patients undergoing breast reconstruction with abdominal flap. Methods: From June 2006 to January 2008, 28 patients underwent MDCT evaluation before breast reconstruction. All subjects were females with an age range of 30 to 55 years. The CT scan was performed using a 64 - slice MDCT scanner(Brilliance 64; Philips Medical Systems, Best, Netherlands). Results: One perforator or two major perforators were marked on image in good relation with a hand - held Doppler examination and intraoperative findings. All vascular run - off systems were cleared before operation. Conclusion: Preoperative evaluation of perforator arteries with MDCT angiography is beneficial in patients undergoing breast reconstruction. This technique provides a noninvasive approach of the vascular anatomy of the entire anterior abdominal wall.

• Clean Technology
• /
• v.17 no.4
• /
• pp.353-362
• /
• 2011

In our nature, the utilization of rainwater is essential for healthy water recirculation. This is one of the solutions of the increment of impermeability surface according to the development of new cities; this study of the improvement of rainwater quality has been carried on through the improvement of collecting and restoring system of rainwater. The southwestern region of Daejeon City, the rainwater coefficient of run off was 0.40 and this number had computed to 0.59 after the development. After filtration of rainwater, the heavy metal (Cu, As, Cr, Fe, Mn) contents level were lower than underground water. Moreover, collected rainwater showed better quality than underground water in following criteria; hardness, permanganate consumption quality, chloride, evaporation residue, sulfates and nitrate nitrogen. This water quality met the gray water quality standards. The rainwater quality was still suitable to use as bathroom flushing and gardening after 100 days of storage. This study proved that modification (installation of cover with gutter to existing rainwater collection system, proper filtering, and installation of underground storage tank) of collection system could improve quality of water and maintain this approximately 100 days.

• Journal of Environmental Science International
• /
• v.23 no.4
• /
• pp.553-560
• /
• 2014

The rainfall-runoff characteristics in Jeju Island significantly differ from those in inland, due to highly permeable geologic features driven by volcanic island. Streams are usually sustained in the dry conditions and thereby the rainfall-runoff characteristics changes in terms of initiating stream discharge and its types, depending highly on the antecedent precipitation. Among various the rainfall-runoff characteristics, lag time mainly used for flood warning system in river and direct runoff ratio for determining water budget to estimate groundwater recharge quantity are practically crucial. They are expected to vary accordingly with the given antecedent precipitation. This study assessed the lag time in the measured hydrograph and direct runoff ratio, which are especially in the upstream watershed having the outlet as $2^{nd}$ Dongsan bridge of Han stream, Jeju, based upon several typhoon events such as Khanun, Bolaven, Tembin, Sanba as well as a specific heavy rainfall event in August 23, 2012. As results, considering that the lag time changed a bit over the rainfall events, the averaged lag time without antecedent precipitation was around 1.5 hour, but it became increased with antecedent precipitation. Though the direct run-off ratio showed similar percentages (i.e., 23%)without antecedent precipitation, it was substantially increased up to around 45% when antecedent precipitation existed. In addition, the direct run-off ration without antecedent precipitation was also very high (43.8%), especially when there was extremely heavy rainfall event in the more than five hundreds return period such as typhoon Sanba.

• Journal of Environmental Health Sciences
• /
• v.27 no.2
• /
• pp.51-59
• /
• 2001

Song stream is located in the upstream of the Namhan River. Normal times, the stream flows down to the east sea through the drainage pipe but at rainy season, it flows to the Namhan River. There are large stock farm, leisure town and cultivated land in this basin. The pollutants from these contamination source cause eutrophication at lake Doam and deterioration of water quality in namdai stream. In this case, this study was carried out to evaluate water quality and environmental capacity as well as economical efficiency of each industry. The basin shape factor of subject stream was 0.315, slope is higher than usual basin. The BOD, T-N and T-P productive contamination loading from each contamination source was 2,690, 974 and 194 kg/day, respectively, and major contamination source was stock farm and cultivated land. Annual BOD, T-N, T-P distribution(median value) of Song stream showed 1.0~2.2 mg/L, 3.16~5.85 mg/L and 0.024~0.197 mg/L Doam lake showed 1.1~1.9, 2.51~3.89 and 0.042~0.114 mg/L, respectively. Being compared of water quality at main stream between past and present, it showed that the water quality has improved since last five years. BOD improvement rate was 8~50%. Run off loading of BOD, T-N, T-P was 366, 1129, 17.2 kg/day, and run off rate was 13.6%, 86.2%, 11.3% respectively. Finally, the result of productivity survey of each industry, leisure town, cultivated land and large stock farm was 118, 46, 50 billion won, per T-P 1kg productive, and productivity portion was 100, 39, 42% respectively, and the highest economical efficiency industry was leisure facilities.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.787-790
• /
• 2008

The SWAT(Soil and Water Assesment Tool) is a relatively large scale model for the complicated watershed or river basin. The model was developed to predict the effect of land management practices on water, sediment and agricultural chemical yields in large complex watershed with varying soils, land use and management conditions over long periods of time. Usually streams are divided into urban stream and natural stream in accordance with the development level. In case of urban stream, according to urbanization, as impermeable areas are increasing due to the change of land use condition and land cover condition, dry stream phenomenon at urban stream is rapidly progressed. In this study, long term run-off simulations in urban stream are performed by using SWAT model. Especially, the model is applied in small scale water shed, Joman River basin. The optimization by the sensitivity analysis is also performed for the model parameter estimations.

• Journal of Soil and Groundwater Environment
• /
• v.23 no.3
• /
• pp.43-50
• /
• 2018

In a previous study, the feasibility of four materials (bentonite, steelmaking slag, lime and organic compost) to induce soil aggregate formation was assessed and the mixtures of organic compost and lime were chosen as most effective amendments in terms of cost benefit. This work is a subsequent study to evaluate the effectiveness of those amendments in reducing soil loss in $15^{\circ}$ sloped agricultural area by using rainfall simulation test. Three different soils were treated with two conditions of organic compost/lime mixtures (2% + 2%, 3% + 1%, w/w). In the amended soils, soil fertility was increased due to the increase of CEC, T-N, and T-P. During the rainfall simulation, suspended solid in run-off water from amended soil were reduced by 43% ~ 78%. When the content of organic compost was higher than that of lime, reduction of soil loss was also increased by 67% ~ 78%. Sediment discharge was also decreased by 72% ~ 96% in the amended soil. Similar to the suspended solid analysis, higher organic compost content led to more reduction of soil discharging, which implies organic compost is more effective than lime in reducing soil loss. The overall result suggests that the mixtures of organic compost and lime could be used as amendment materials to reduce soil loss in sloped farmland.

• Journal of the Korean Society of School Health
• /
• v.32 no.2
• /
• pp.96-104
• /
• 2019

Purpose: The purpose of this study was to examine the influence of runaway experience on sexual victimization in adolescents. Methods: The data of the Korean Survey on the Rights of Youth and Children (2016) were used. A total of 7,114 middle and high school students were included in the analysis. Descriptive statistics, a $x^2$ test, and multiple logistic regression analysis were conducted using SAS 9.3. Results: About 3.8% of the total students had run away from home before and 4.1% of the students experienced sexual victimization. The results from the multiple logistic regression analysis revealed that adolescents who had run away from home before showed a higher risk of being sexually victimized (AOR: 1.76, 95% CI: 1.13~2.72). Lower economic status (AOR: 1.42, 95% CI: 1.03~1.97), suicidal ideation (AOR: 1.80, 95% CI: 1.37~2.38), depressive feelings (AOR: 1.36, 95% CI: 1.04~1.78), victims of violence by teachers (AOR: 1.56, 95% CI: 1.20~2.03), victims of off-line school bullying (AOR: 5.00, 95% CI: 3.56~7.01), victims of on-line bullying (AOR: 2.61, 95% CI: 1.79~2.80), and victims of both on- and off-line bullying (AOR: 6.62, 95% CI: 4.76~9.22) showed a highest risk of being sexually victimized. Conclusion: Therefore, in order to lower the rate of experiencing sexual victimization in youths, measures should be taken to keep them from running away from home. In addition, if necessary, measures should be taken to prevent secondary mental traumas that may arise from the experience of sexual victimization.

• Journal of Information Display
• /
• v.6 no.3
• /
• pp.18-21
• /
• 2005

A new technology for reducing photolithography process from a four step to a three step process in the fabrication of TFT LCD is introduced. The core technology for 3-mask-TFT processes is the lift-off process [1], by which the PAS and PXL layers can be formed simultaneously. A different method of the lift-off process was developed in order to enhance the performance of efficiency with conventional positive and not negative PR which is the generally used in other lift-off process. In addition, the removal capacity of the ITO/PR in lift-off process was evaluated. The evaluation results showed that the new process can be run in conventional TFT production condition. In order to apply this new process in existing TFT process, several tests were conducted to ensure stability of the TFT process. It was found that the outgases from PR on the substrate in ITO sputtering chamber do not raise any problem, and the deposited ITO film beside the PR has conventional ITO qualities. Furthemore, the particles that were produced due to the ITO chips in PR strip bath could be reduced by the existing filtering system of stripper. With the development of total process and design of the structure for TFT using this technology, 3-mask-panels were achieved in TN and IPS modes, which showed the same display performances as those with the conventional 4mask process. The applicability and usefulness of the 3-mask process has already verified in the mass production line and in fact it currently being used for the production of some products.