• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.11
• /
• pp.1527-1530
• /
• 2002

Factor analysis was applied to the phenotypic correlation matrix of 15 linear type traits (scored linearly 1 to 50 points) for 2035 Holstein cows of 38 sires computed from data collected between 1988 and 1992 in Beijing Shuangqiao Farm and Beijing Xijiao Farm. The 15 linear type traits were stature, body strength, body depth, dairy form, rump angle, rump length, rump width, rear leg side view, foot angle, fore udder attachment, rear udder height, rear udder width, udder cleft, udder depth and teat placement rear view. The first four components accounted for 49.1% of the total variance in type scores. Factor 1 reflected strong cows, with deep bodies, with long and wide rumps, and tall in stature. Factor 2 reflected cows with well attached fore udders, wide rear udders and whose udders were supported by strong suspensory ligaments with close teat placement. Factor 3 reflected cows with good dairyness, sickled in the hocks, high rear udders and udder floors above the hocks. Factor 4 reflected cows with sloping rumps from hooks to pins and with steep foot angle. Principal component and factor analyses are useful to clarify the relationships among type traits.

• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.3
• /
• pp.155-159
• /
• 1990

The growth of lean from nine wholesale cuts in relation to the total lean weight in carcass side were evaluated with three allometric equations for 18 Najdi male camels slaughtered at 8, 16 and 26 months of age. The allometric growth coefficients indicated that as the camels grew, weights of lean form brisket and flank cuts increased relatively more rapidly than the total lean in carcass side (${\beta}$ >1.1) and that weights of lean from wholesale shoulder and rump cuts increased relatively less rapidly (${\beta}$ <.9) than the total lean weight from carcass side. The growth coefficients for the lean in the thoracic limb and pelvic limb showed a dorsoventral rise in the growth impetus, with coefficients for the thoracic limb correspondingly higher than those of pelvic limb. The growth coefficients for the lean from shoulder, rib, flank and leg cuts increased (p<.01) with increased weight of total lean in carcass side, whereas it decreased with increased total lean weight in carcass side for the lean in neck, brisket, plate, loin and rump cuts. At a constant weight of total lean in carcass side, older camels had larger coefficients for lean in neck, brisket, rump, flank and leg cuts, but had smaller coefficients for lean in shoulder, rib, plate and loin cuts.

• Journal of Animal Science and Technology
• /
• v.51 no.3
• /
• pp.255-262
• /
• 2009

Current study was conducted to investigate the influence of parity and region variation in ultrasound live carcass traits of Hanwoo cows. A total of 1,386 heads of Hanwoo cows, spreading over six regions in Gangwon province of South Korea, were measured for longissimus muscle area, back fat thickness, marbling score and rump fat thickness by using real-time ultrasound method. The results revealed that, positive correlations were found in all ultrasound live carcass traits. All live carcass traits were increased in accordance with parity until the sixth, and then decreased thereafter. Statistical significant differences (p<0.01) were found among regions in ultrasound live carcass traits, e.g. Hanwoo cows showed highest longissimus muscle area and marbling score in Hwacheon, while the lowest back fat thickness and rump fat thickness were observed in Yanggu. Greater longissimus muscle area and marbling scores were found in Hanwoo cows which were born during autumn, 2000. Moreover, individuals born during autumn, 2005 and 2006 showed a thicker back fat and rump fat thickness. Back fat thickness had the highest positive correlation with rump fat thickness, while rib eye area and rump fat thickness had the lowest correlation.

• Journal of agriculture & life science
• /
• v.51 no.6
• /
• pp.89-105
• /
• 2017

This study utilized 32,312 records of 17 linear type and 10 conformation traits(including final scores) of Hanwoo cows in the KAIA(Korea Animal Improvement Association) ('09~'10), with 60,556 animals in the pedigree file. Traits included stature, body length, strength, body depth, angularity, shank thickness, rump angle, rump length, pin bone width, thigh thickness, udder volume, teat length, teat placement, foot angle, hock angle, rear leg back view, body balance, breed characteristic, head development, forequarter quality, back line, rump, thigh development, udder development, leg line, and final score. Genetic and residual(co) variances were estimated using bi-trait pairwise analyses with EM-REML algorithm. Herd-year-classifier, year at classification, and calving stage were considered as fixed effects with classification months as a covariate. The heritability estimates ranged from 0.03(teat placement) to 0.42(body length). Rump length had the highest positive genetic correlation with pin bone width(0.96). Moreover, stature, body length, strength, and body depth had the highest positive genetic correlations with rump length, pin bone width, and thigh thickness(0.81-0.94). Stature, body length, strength, body depth, rump length, pin bone width, and thigh thickness traits also had high positive genetic correlations.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.40 no.3
• /
• pp.167-176
• /
• 2020

The objective of the present study was to determine the best model to describe and quantify the changes in live body weight, height at withers, height at rump, body length and chest girth of Holstein cows raised under Korean feeding conditions for 50 months. The five standard growth models namely polynomial linear regression models, regression of growth variables on the first and second-order of ages in days (model 1) and regression of growth variables on age covariates from first to the third-order (model 2) as well as non-linear models were fitted and evaluated for representing growth pattern of Holstein cows raised in Korean feeding circumstances. Nonlinear models fitted were three exponential growth curve models; Brody, Gompertz, and von Bertalanffy functional models. For this purpose, a total of 22 Holstein cows raised in Korea used in the period from April 2016 to May 2020. Each model fitted to monthly growth curve records of dairy cows by using PROC NLIN procedure in SAS program. On the basis of the results, nonlinear models showed the lower root mean square of error (RMSE) for live body weight, height at withers, height at rump, body length and chest girth (12.22, 1.95, 1.55, 4.04, 2.06) with higher correlation coefficiency (R²) values for live body weight, height at withers, height at rump, body length and chest girth (0.99, 0.99, 0.99, 1.00, 1.00). Overall, the evaluation of the different growth models indicated that the Gompertz model used in the study seemed to be the most appropriate one for standard growth of Holstein cows raised under Korean feeding system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.3
• /
• pp.322-329
• /
• 2011

A whole genome association (WGA) study was conducted to identify quantitative trait loci (QTL) for body conformation traits in Hanwoo cattle. The phenotypes of 497 steers were recorded from the Hanwoo Improvement Center of National Agricultural Cooperative Federation, Seosan, Korea, and analyzed using the Illumina Bovine 50 k SNP chip. A set of 35,987 SNPs that were available in the Hanwoo population was selected from the chip. After adjustments for the effects of year-season of birth, region and sire, phenotypes were regressed on each SNP using a linear regression model. Three hundred nineteen SNPs were detected for the ten conformation traits (p<0.003). For the significant SNPs, stepwise regression procedures were applied to determine best sets of markers. A total of 72 SNPs were selected (p<0.001), for which the sets of 5, 9, 10, 9, 8, 11, 4, 6, 3 and 7 SNPs were determined for height at withers, rump height, body length, chest depth, chest width, rump length, hip width, thurl width, pinbone width and heart girth, respectively. About 7-26% of the total phenotypic variation was explained by the set of SNPs for each trait. QTL for the conformation traits were harbored on most bovine chromosomes (BTAs). Four SNPs with pleiotropic effects on height at withers and rump height were detected on BTAs 3, 4, 6 and 16. A SNP with pleiotropic effects on chest width and rump length was also detected on BTA10. Two QTL regions, i.e. between 87 and 97 Mb in BTA3 and between 41 and 44 Mb in BTA7, were found, in which SNPs were detected for the five and three conformation traits, respectively. The detected SNPs need to be validated in other Hanwoo populations for commercial application to the genetic improvement of conformation characteristics in Hanwoo via marker-assisted selection (MAS).

• Economic and Environmental Geology
• /
• v.29 no.1
• /
• pp.45-55
• /
• 1996

Although the Dongjin Au-Ag-Cu mine had been abandoned since about forty years ago, the results of this study on the dispersion patterns and contamination level of heavy metals in the hydrologic system flowing via the waste rump show that the environmental impacts from the mine wastes are still significant. The stream water in the vicinity of the waste rump is severely acidified (pH 3.8 to 4.4) and highly enriched in various dissolved heavy metals. The heavy metal contents of the stream water and stream sediments are systematically attenuated with increasing distance from the mine area. However, it is worth to note that continuous attenuation of heavy metal contents in both media were reenriched in downstream area more than 800 m apart from the mine because it can be acted as a secondary source of heavy metal pollution. The heavy metals, especially Cd, Cu and Zn of polluted downstream sediments mainly occur in Fe-Mn oxides and organic materials, which indicates that these elements are the main pollutants from the waste rump of the Dongjin mine. The heavy metal contents of crops, such as sesame, perilla, red Pepper and brown rice, collected from the polluted farm land in the downstream area are lower than those of land plants from stream sides, but significantly higher in Cd, Cr, Cu and Zn than those from the unpolluted farm land. Especially, almost all of the crops in polluted farm land have been severly contaminated by Cd (>0.4 ppm). On the other hand, the heavy metal contents of the crops collected from refreshed farm land by means of a soil addition method shows significantly lowered level comparing with those of polluted area, which indicates that a soil addition method was effective for the refreshment of polluted farm land by toxic metallic pollutants. Wormwoods from this area showed very high contents in a11 the heavy metals even in unpolluted area (Cd > 1 ppm, Cr > 1 ppm, Cu > 11 ppm, Pb> 4 ppm, Zn > 55 ppm), indicating that a special caution must be payed when one takes ingest them.

• Korean Journal of Animal Reproduction
• /
• v.26 no.1
• /
• pp.69-72
• /
• 2002

Two trials were conducted in a commercial dairy on heifer synchronization with PGF$_2$$\alpha$. Animals showing estrous following the first injection were bred and animals not showing estrus were given the second injection 10 days later. In the first trial, the injection routes were rump and rump. In the second trial, the injection routes were rump and shoulder. Estrous detection were performed from 24 h after injection. Animals were bred by the same technician. In the first trial, the response rate for the first injection was 51.4% and the subsequent pregnancy rate of these animals was 60.0%. The response rate in the second injection was 57.1% and the pregnancy rate was 50.0%. In the second trial, the response rate in the first injection on the rump was 48.7% and the subsequent pregnancy rate was 70.6%. The second injection was given on the shoulder and the response rate was 60.0% and the subsequent pregnancy rate was 25.0%. The data suggest that the route of PGF$_2$$\alpha$ administration was critical to achieve success in estrous synchronization and pregnancy rates.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.5
• /
• pp.617-623
• /
• 2008

A fine-mapping method exploiting linkage disequilibrium was used to detect quantitative trait loci (QTL) on the X chromosome affecting milk production, body conformation and productivity traits. The pedigree comprised 22 paternal half-sib families of Black-and-White Holstein bulls in the Netherlands in a grand-daughter design for a total of 955 sons. Twenty-five microsatellite markers were genotyped to construct a linkage map on the chromosome X spanning 170 Haldane cM with an average inter-marker distance of 7.1 cM. A covariance matrix including elements about identical-by-descent probabilities between haplotypes regarding QTL allele effects was incorporated into the animal model, and a restricted maximum-likelihood method was applied for the presence of QTL using the LDVCM program. Significance thresholds were obtained by permuting haplotypes to phenotypes and by using a false discovery rate procedure. Seven QTL responsible for conformation types (teat length, rump width, rear leg set, angularity and fore udder attachment), behavior (temperament) and a mixture of production and health (durable prestation) were detected at the suggestive level. Some QTL affecting teat length, rump width, durable prestation and rear leg set had small numbers of haplotype clusters, which may indicate good classification of alleles for causal genes or markers that are tightly associated with the causal mutation. However, higher maker density is required to better refine the QTL position and to better characterize functionally distinct haplotypes which will provide information to find causal genes for the traits.

• Economic and Environmental Geology
• /
• v.30 no.2
• /
• pp.123-135
• /
• 1997

In order to investigate the dispersion patterns and contamination level of heavy metals in the soil-ecosystem and to evaluate the efficiency of soil remediation by reversed soil method, soils and plants were collected from the Dongjin Au-Ag-Cu mine area and analysed for heavy metals. The dispersion patterns of heavy metals in soils and plants show that heavy metal pollutions caused by waste rump around Dongjin mine are mainly found in the vicinity of the waste rump and in the southward slanting of mine. Toxic metallic pollutants from the mine influence heavy metal contents in paddy soils in downstream area, and may be a potential sources of heavy metal pollution on crop plants. Soil samples collected from the remediated rice farming field by reversed method show similar levels of heavy metal content to those from the polluted rice farming field, but topsoil enrichment of heavy metals are not found. Heavy metal contents of the rice plants collected from remediated rice farming field are significantly lower than those from polluted rice farming field, and it suggests that the reversed soil method is effective for the reduction of bioavailability of heavy metals.