• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.9-16
• /
• 2013

Objective: The aim of this study is to investigate a trend of human error types observed in a series of verification and validation experiments for an Advanced Control Room(ACR) equipped with Lager Display Panel(LDP), Work Station Flat Panel Display(WS FPD), list type Alarm System(AS), Soft Control(SC) and Computerized Procedure System(CPS). Background: Operator behaviors in a fully computerized control room are quite different from those in a traditional hard-wired control room. Operators in an ACR all together monitor plant status and variables through their own interface system such as LDP and WS FPD, are notified of abnormal plant status through their own list type AS, control the plant through their own SC, and follow the structured procedure through their own CPS whereas operators in a traditional control room only separately do their duty directed by their supervisor. Especially the secondary task such as manipulating the user interface of ACR can be an extra burden to all the operators including the supervisor. Method: The Reason's human error classification method was applied to operators' behavioral data collected from a series of verification and validation experiments where operators showed their plant operational behaviors under a couple of harsh scenarios using the ACR simulator. Results: As operators accustomed to the new ACR system, knowledge or rule based mistakes appearing frequently in the early series of experiments decreased drastically in the latest stage of the series. Slip and lapse types of errors were observed throughout the series of experiments. Conclusion: Education and training can be one of the most important factors for the operators accustomed to the traditional control room to be adapted to the new system and to run the ACR successfully. Application: The results of this study implied that knowledge or rule based mistakes can be reduced by training and education but that lapse type errors might be reduced only through innovative improvement in human-system interface design or teamwork culture design including a new leadership style suitable for ACR.

• The Journal of Information Systems
• /
• v.18 no.4
• /
• pp.59-86
• /
• 2009

Data modeling can be regarded as a series of processes to abstract real-world business concerns. The conceptual modeling phase is often regarded as the most difficult stage in the entire modeling process, because quite different conceptual models may be produced even for similar business domains based on users' varying requirements and the data modelers' diverse perceptions of the requirements. This implies that an object considered as an entity in one domain may be considered as an attribute in another, and vice versa. However, many traditional knowledge-based automated database design systems unfortunately fail to construct appropriate Entity-Relationship Diagrams(ERDs) for a given set of requirements due to the rigid assumption that an object should be classified as an entity if it has been classified as an entity in previous applications. In this paper, we propose an alternative automation system which can generate ERDs from business descriptions using association rule mining technique. Our system can be differentiated from the traditional ones in that our system can perform data modeling only based on business description written by domain workers, rather than relying on any kind of knowledge base. Since the proposed system can produce various versions of ERDs from the same business descriptions simultaneously, users can have the opportunity to choose one of the ERDs as being the most appropriate, based on their business environment and requirements. We performed a case study for personnel management in a university to evaluate the practicability of the proposed system This paper summarizes the result of it in the experiment section.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.675-681
• /
• 2002

Parametric modeling and configuration design method are a important methods for rapid design in manufacturing. This paper proposes a relation rules which parametrically models a bonnet trimming tool based on Pro/Engineer. The concept of desogn is applied a trimming die of the bonnet outer panel. Trimming die have a many parameters. Each a parameter is related the die face and punch profile. A design system consists of a Pro/Engineer, a Pro/program.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.3
• /
• pp.102-107
• /
• 2000

This study describes computer-aided design system for stepped asymmetric forgings. To establish the appropriate process sequence, an integrated approach based on a rule-base system was accomplished. This system has four modules, which are undercut prevention module, shape cognition module, 3D modelling module and corner/fillet correction module. These modules can be used independently or at all. The proposed shape cognition method could be widely used in forging design of asymmetric parts.

• Journal of the Korean Institute of Navigation
• /
• v.13 no.2
• /
• pp.75-95
• /
• 1989

The study presents the optimum design of B/C midship structure based on the classification society's Rule. The SUMT (Sequential Unconstrained Minimization Technique), using the Direct Search Methods (Hooke and Jeeves, Simplex) is applied to the solution of this nonlinear optimum design problem with constraints. Through the optimum designs of existing ships(60k, 186k, 220k), the amount 0.45-6.18% in weight of their midship structures are obtained on the viewpoint of minimum weight design.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.3
• /
• pp.11-17
• /
• 2001

The design and manufacture of injection molded polymeric parts with desired properties is a costly process dominated by empiricism, including the repeated modification of actual tooling. This paper presents an expert design evaluation system which can predict the mechanical performance of a molded product and diagnose the design before the actual mold is machined. The knowledge-based system synergistically combines a rule-based expert system with CAE programs. Heuristic knowledge of injection molding is formalized as rules of an expert consultation system. The expert system interprets the analytical results of the process simulation, predicts the performance, evaluates the design and generates recommendations for optimal design alternatives.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.431-436
• /
• 1986

The design and manufacture of injection molded polymeic parts with desired mechanical properties is a costly process dominated by empiricism, including the modification of actual tooling. This paper presents an interactive computer-based design system for injection molded plastic parts. This knowledge-based synthesis system provides a rational design strategy for injection molding and molded parts. It synergistically combines a rule-based expert system for hurestic knowledge with analytical process simulation programs. The theremomechanical properties of a molded part such as the effect of molecular orientation and weldline strength are predicted by the analysis programs; while the expert system interprets the analytical results from the process simulation, evaluates the design, and generates recommendations for optimal design alternatives. The heuristic knowledge of injection molding is formalized as production rules of the expert consultation system.

• Transactions on Electrical and Electronic Materials
• /
• v.5 no.3
• /
• pp.104-108
• /
• 2004

Problems of overlap errors and side-lobe printing by the design rule reduction in the lithography process using attenuated phase-shifting masks(attPSM) have been serious. Overlap errors and side-lobes can be simultaneously solved by the rule-based correction using scattering bars with the rules extracted from test patterns. Process parameters affecting the attPSM lithography simulation have been determined by the fitting method to the process data. Overlap errors have been solved applying the correction rules to the metal patterns overlapped with contact/via. Moreover, the optimal insertion rule of the scattering bars has made it possible to suppress the side-lobes and to get additional pattern fidelity at the same time.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.10a
• /
• pp.315-320
• /
• 1997

Rule minimization technique adapted from rough set theory was applied to remove redundant knowledge which is not necessary to make a knowledge base. New algorithm to diagnose fault using Improved Fuzzy Cognitive Maps(I-FCMs), and Fuzzy Associative Memory(FAM) is proposed. I-FCM[22] is superior to gathering knowledge from many experts and descries dynamic behaviors of systems very well. I-FCM is not only a knowledge base, but also a inference engine. FAM has learning capability like neural network[12]. Rule minimization and composition of I-FCM and FAM make it possible to construct compact knowledge base and breaks the border between inference engine and knowledge base.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.57-62
• /
• 1999

A disassembility assessment has mostly depend on the subjective decision making from the qualitative element. It is not useful in the practical assessement because it is not specified. The purpose of this paper is an assessmet based on Fuzzy-study-rule. This rule is definitely modified fromnon-fuzzy language of qualitative element. The new assessment method of design for disassembility assessment(DFDA) is practical to introduce the fuzzy number as the conversion of quantitative element from qualitative. It is appled to air-cleaner of passenger-vehicle for the usefulness.