• Journal of Ship and Ocean Technology
• /
• 제10권4호
• /
• pp.12-23
• /
• 2006

In this paper, a numerical study is carried out to investigate the turbulent flow around a twin-skeg container ship model with rudders including propeller effects. A commercial CFD code, FLUENT is used with body forces distributed on the propeller disk to simulate the ship stem and wake flows with the propeller in operation. A multi-block, matching, structured grid system has been generated for the container ship hull with twin-skegs in consideration of rudders and body-force propeller disks. The RANS equations for incompressible fluid flows are solved numerically by using a finite volume method. For the turbulence closure, a Reynolds stress model is used in conjunction with a wall function. Computations are carried out for the bare hull as well as the hull with appendages of a twin-skeg container ship model. For the bare hull, the computational results are compared with experimental data and show generally a good agreement. For the hull with appendages, the changes of the stem flow by the rudders and the propellers have been analyzed based on the computed result since there is no experimental data available for comparison. It is found the flow incoming to the rudders has an angle of attack due to the influence of the skegs and thereby the hull surface pressure and the limiting streamlines are changed slightly by the rudders. The axial velocity of the propeller disk is found to be accelerated overall by about 35% due to the propeller operation with the rudders. The area and the magnitude of low pressure on the hull surface enlarge with the flow acceleration caused by the propeller. The propellers are found to have an effect on up to the position where the skeg begins. The propeller slipstream is disturbed strongly by the rudders and the flow is accelerated further and the transverse velocity vectors are weakened due to the flow rectifying effect of the rudder.

• Journal of Ship and Ocean Technology
• /
• 제4권1호
• /
• pp.1-10
• /
• 2000

A low-order potential based boundary element method is applied for the prediction of the performance of flapped rudders as well as all-movable rudders in steady inflow. In order to obtain a reasonable solution at large angles of attack, the location of the trailing wake sheet is determined by aligning freely with the local flow. The effect of the wake sheet roll-up is also included with use of a high order panel method. The flow in the gap of a flapped rudder is modeled as Couette flow and its effect is introduced into the kinematic boundary conditions for flux at both the inlet and the outlet of the gap. In order to validate the present method, the method is applied for a series of rudders and the computational results on forces and moments are compared with experimental data. The effect of the gap size on the forces and moments is also presented.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.137-139
• /
• 2003

As a part of numerical and experimental research works for the prediction and improvement of ship's maneuvering performance, a study on the performance analysis of two different rudders has been carried out. While the planform shape and the aspect ratio of the rudders have been fixed, section shape has been changed. Conventional type of HMRI NP section and special type of dolphin-tail section have been employed. Performances of the rudders have been investigated by using CFD and compared with experimental data obtained in a wind tunnel. A commercial CFD program has been used to solve the RANS equations. Two-equation k-ro model has been applied to close the governing equations. Block-structured grids are used in the numerical calculation. Based upon the calculation results, the rudder with dolphin-tail section has shown a possibility of significantly improving rudder performance if utilized as the section of ship rudders.

• 대한조선학회논문집
• /
• 제34권3호
• /
• pp.27-37
• /
• 1997

본 연구는 특수타의 채택으로 인한 침로 안정성 개선 효과에 관한 내용을 담고 있다. 구체적으로 여러 특수 형태의 타(본 연구에서는 특수타로서 볼록타, 오목타, 플랩타, 엔드플레이트타를 생각함)를 동일 선체에 설치하였을 때의 침로 안정성 개선 효과를 조사하기 위해서, 먼저 특수타의 타 단독 시험을 실시하여 양력 개선 효과를 조사하였으며, 또한 선체-프로펠러-타 시스템에서의 각종 구속 모형 시험을 실시하여, 특수타가 타수직력과 관련된 실험 정수들에 미치는 영향을 조사하였다. 그리고 실험 결과로부터 특수타의 채택에 따른 조종성 미계수의 변화를 구하고, 침로 안정성을 정량적으로 분석, 비교 및 검토하였다. 그 결과, 볼록타와 오목타 그라고 플랩타는 침로 안정화에 거의 기여하지 못하고, 엔드플레이트타는 침로 안정성을 크게 향상시킨다는 것을 확인하였다. 본 연구 결과는 초기 설계 단계 또는 선박 건조 후 침로 안정성이 문제시된 선박에, 선미 형상의 설계 변경없이 타의 형상 개조만으로 침로 안정성을 개선시키고자 할 때 유용하게 활용될 것으로 기대된다.

• 대한조선학회논문집
• /
• 제30권4호
• /
• pp.31-38
• /
• 1993

선박이나 수중운동체의 효율적인 조종을 위하여 호온타나 플랩타가 이용되고 있으며 이들은 앞뒤 부분 사이에 간극을 갖고 있다. 이 간극의 크기에 따라 타에 미치는 영향이 다르며 타의 성능 추정을 위해서 이에 대한 해석이 필수적이다. 본 논문에서는 동심축을 갖는 곡면 수로에 압력구배가 있을 때의 점성 유동 해와 얇은 수중익 이론을 이용하여 2차원 플랩타가 균일류 중에 있을 때 플랩타에 작용하는 양력을 계산하는 식을 유도하고, 간극이 양력에 미치는 영향을 고찰한다.

• 로봇학회논문지
• /
• 제13권2호
• /
• pp.103-112
• /
• 2018

In this paper, a high performance underwater vehicle which can be manufactured at low cost is designed and fabricated, and its performance is verified through experiments. To improve efficiency, the Myring equation is used to design the appearance and the duct structure including the thruster is planned to increase the propulsion efficiency while reducing the drag force. Through various methods, it is secured stable waterproof performance, and also is devised to have high speed movement and turning performance. The developed underwater vehicle is equipped with a high output BLDC motor to achieve a linear speed of up to 2 m/s and can change direction rapidly with stability through four rudders. The rudders are driven by coupling a timing belt and a pulley by extending the axis of a servo motor, and are equipped at the end of the body to turn heading. In addition, for stable posture control, the roll keeps its internal center of gravity low and maintains its stability due to restoring force. By controlling the four rudders, pitch and yaw are handled by the PID controller and show stable performance. To investigate the horizontal turning performance, it is confirmed that the yaw rate controller is designed and stable yaw rate control is performed.

• 한국해양공학회지
• /
• 제27권2호
• /
• pp.87-92
• /
• 2013

The variation in the course keeping ability in relation to rudder type is investigated using simulations with 3 different types of rudders (a normal rudder, normal rudder with a plate, and Schilling rudder) under wave conditions. The simulation is developed based on an MMG model with Kijima's regression model, along with the data from Son's experiments and Kose's experiments. A 3-D source distribution method is applied to calculate the source of the external wave forces for the simulation. The coefficients of an autopilot controller that may affect the course keeping ability are also estimated from the simulations with the different rudders. The course keeping ability is evaluated by comparing the forward distances while the ships are simulated with the rudders and autopilot controller.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권3호
• /
• pp.322-334
• /
• 2012

This paper shows the numerical and experimental results about the hydrodynamic characteristics of X-Twisted rudders having continuous twist of the leading edge along the span. All the results were compared with those of the semi-balanced rudder. Calculation through the Reynolds-Averaged Navier-Stokes Equation (RANSE) code with propeller sliding meshes shows large inflow angle and fast inflow velocity in the vicinity of ${\pm}0.7$ R from the shaft center, so it may cause cavitation. Also, X-Twisted rudder has relatively small inflow angles along the rudder span compared with semi-balanced rudder. For the performance validation, rudders for two large container carriers were designed and tested. Cavitation tests at the medium sized cavitation tunnel with respect to the rudder types and twisted angles showed the effectiveness of twist on cavitation and the tendency according to the twist. And the resistance, self-propulsion and manoeuvring tests were also carried out at the towing tank. As a result, in the case of X-Twisted rudder, ship speed was improved with good manoeuvring performance. Especially, it was found out that manoeuvring performance between port and starboard was well balanced compared with semi-balanced rudders.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.715-722
• /
• 2014

Three twisted rudders fit for large container ships have been developed; 1) the Z-twisted rudder that is an asymmetry type taking into consideration incoming flow angles of the propeller slipstream, 2) the ZB-twisted rudder with a rudder bulb added onto the Z-twisted rudder, and 3) the ZB-F twisted rudder with a rudder fin attached to the ZB-twisted rudder. The twisted rudders have been designed computationally with the hydrodynamic characteristics in a self-propulsion condition in mind. The governing equation is the Navier-Stokes equations in an unsteady turbulent flow. The turbulence model applied is the Reynolds stress. The calculation was carried out in towing and self-propulsion conditions. The sliding mesh technique was employed to simulate the flow around the propeller. The speed performances of the ship with the twisted rudders were verified through model tests in a towing tank. The twisted versions showed greater performance driven by increased hull efficiency from less thrust deduction fraction and more effective wake fraction and decreased propeller rotating speed.

• 한국해양공학회지
• /
• 제34권5호
• /
• pp.325-333
• /
• 2020

As regulations concerning ship vibration and noise are becoming stricter, considerable attention is being drawn to prediction technologies for ship vibration and noise. In particular, the resonance and lock-in phenomena caused by vortex-induced vibration (VIV) have become considerably important with increases in the speed and the size of ships and ocean structures, which are known to cause structural problems. This study extends the fluid-structure interaction (FSI) analysis method to predict resonances and lock-in phenomena of high modes and VIV of ship rudders. Numerical stability is secured in underwater conditions by implementing added mass, added damping, and added stiffness by applying the potential theory to structural analysis. An expanded governing equation is developed by implementing displacements and twist angles of high modes. The lock-in velocity range and resonant frequencies of ship rudders obtained using the developed FSI method agree well with the experimental results and the analytic solution. A comparison with local vibration guidelines published by Lloyd's Register shows that predictions of resonances and lock-in phenomena of high modes are necessary in the shipbuilding industry due to the possible risks like fatigue failure.