• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.337-340
• /
• 2001

The control of high pretilt angle for nematic liquid crystal (NLC) with negative dielectric anisotropy on the rubbed blending polyimide (homeotropic and homogeneous alignment) surface were studied. High NLC pretilt angle generated on the blending polyimide (homeotropic polyimide and SE-7492 surface was measured and the NLC pretilt angle increases with blending ratio and rubbing strength. However, the NLC pretilt angle generated on the blending polyimide (homeotropic polyimide and SE-150 surface was not varied. The high pretilt angle the NLC using blending polyimide surface can be achieved.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.61-62
• /
• 2009

Electro-optical properties of liquid crystal display (LCD) using fringe-field switching (FFS) devices depend on many parameters such as cell retardation, electrode structure, magnitude and sign of dielectric anisotropy, rubbing angle and cell gap. In this paper, the light efficiency of FFS device depending on magnitude of positive dielectric anisotropy with other cell parameters such as rubbing angle and angle and cell gap have been explored compared with FFS device using LC with negative dielectric anisotropy.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.263-266
• /
• 1998

In this study, the effect of the crystallinity of polyimide (Pl) and the birefringence of the nematic liquid crystal (NLC) for pretilt angle generation on rubbed PI surface containing thiophenylene moieties has been demonstrated. The induced optical retardation produced in rubbed Pl surfaces decreases on increasing the imidization temperature. We suggest that the pretilt angle of 4-cyano-4'-n-pentybiphenyl (5CB) depends on the crystallinity of the rubbed Pl. The order of pretilt angle in NLCs is 5CB>PCH5$\geq$CCH5 at rubbing strength(RS)=150mm (medium rubbing) on rubbed PI surfaces. We suggest that on rubbed Pl surfaces the pretilt angle increases with increasing number of phenylrings in the NLC core.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.426-427
• /
• 2006

In this paper, the neural network model of the pretilt angle in the nematic liquid crystal on the homogeneous polyimide surface with different surface treatments is investigated. The pretilt angle is one of the main factors to determine the alignment of the liquid crystal display. The pretilt angle is measured to analyze the variation of the characteristics on the various process conditions. The rubbing strength and the hard baking temperature are considered as input factors. Latin hypercube sampling was used to generate initial weights and biases.

• Transactions on Electrical and Electronic Materials
• /
• 제4권4호
• /
• pp.7-9
• /
• 2003

Viewing angle characteristics of a nematic liquid crystal (NLC) using a in-plane driven (IPD) vertical alignment (VA) cell without a negative compensation film on a homeotropic alignment layer were studied. Good voltage-transmittance (V - T) curves were obtained using the rubbing aligned IPD- VA cell. However, instability and low transmittances of V - T characteristics in photo aligned IPD- VA cell was measured. The EO performance of a rubbingaligned IPD- VA cell without a negative compensation film was wider than that of photoaligned IPD- VA cell and conventional VA cell. Also, the fabrication processes using the rubbing aligned IPD- VA cell mode be carried out with only one-sided rubbing.

• 한국전기전자재료학회논문지
• /
• 제17권8호
• /
• pp.866-870
• /
• 2004

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with rubbing alignment method on polyimide surfaces using plastic substrates. It was found that monodomain alignment of NLC is obtained with rubbing alignment method on polyimide surfaces using thin plastic substrates. The NLC pretilt angles on thin plastic substrates generated higher than that on glass substrate. Also, EO characteristics of the TN-LCD with a rubbed PI surface based on polymer substrate are almost the same as that of the TN-LCD with a rubbed PI surface based on glass. However, the transmittances of the TN-LCD with a rubbed PI surface based on polymer is less than that with a rubbed PI surface based on g1ass.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권9호
• /
• pp.876-880
• /
• 1997

In this paper we investigated the transcription of liquid crystal (LC) alignment method by using memory effect of nematic(N) LCon polymide(PI) surface with side chain as for non-rubbing alignment techniques. That the monodomain alignment of aligned NLC is observed by microscope textures in the cells on PI surface with side chain. We obtained that the pretilt angle of NLC are generated about 3.7$^{\circ}$on PI surface. We suggest that the LC alignment by using transcription alingnment method is attributed to memory effect of NLC on PI surface.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권1호
• /
• pp.15-19
• /
• 1997

The characteristics of the response time and the viewing angle on twisted nematic (TN) liquid crystal display (LCD) and amorphous (a)-TN-LCD without rubbing were investigated. To measure the tansmission-voltage, response time, and viewing angle characteristics, we prepared three kinds of LC cells and then studied the surface liquid crystal alignment effect. It was found that the response time on A-TN-LCD was fast compared to the TN-I-CD, and the weak anchoring strength was attributed to the fast response time on a-TN-LCD. Also, we obtained the wide viewing angle characteristics on a-TN-LCD. The liquid crystal alignment of LCD device for electro-optical characteristics is discussed in the present paper.

• 한국전기전자재료학회논문지
• /
• 제16권6호
• /
• pp.510-514
• /
• 2003

We have studied the alignment of liquid crystals (LCs) on homeotropic polymeric surface that is scanned using an atomic force microscope (AFM) tip by optical polarizing microscopy and computer simulation. The scanned areas on one substrate are 5 $\mu\textrm{m}$ ${\times}$ 5 $\mu\textrm{m}$, 10 $\mu\textrm{m}$ ${\times}$ 10 $\mu\textrm{m}$, and 20 $\mu\textrm{m}$ ${\times}$ 20 $\mu\textrm{m}$ and this substrate is assembled to another substrate coated. with homeotropic polymer. The fabricated micro-LC cell using two substrates does not show any hysteresis and disclination lines inside the nano-rubbing areas, while changing voltage up and down. This indicates that the pretilt angle exists in the areas, thereby forming a hybrid LC configuration. From the experimental and computer simulation results, we can understand that the AFM rubbing clearly changes surface status of homeotropic alignment layer and causes the pretilt angle to an initial scanning direction.

• 한국전기전자재료학회논문지
• /
• 제17권7호
• /
• pp.754-759
• /
• 2004

We have studied the fringe field switching (FFS) mode with the positive dielectric anisotropy for the fast response time. The factors such as the physical properties of the LC, the cell gap, and the rubbing angle were critical for the fast response time of the FFS mode. The response time became 10 ms faster when the rotational viscosity of the new LC is 20 mPa.s lower than the conventional LC. When the cell gap changed from 3.6 ${\mu}{\textrm}{m}$ to 3.0 ${\mu}{\textrm}{m}$, it was possible to achieve the total response time and response times associated with grey-to-grey transitions under 16 ms. And the response times including grey-to-grey transitions become fast as the rubbing angle decreases.