• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.123-133
• /
• 2014

Minimizing the cylinder wear and the consumption rate of cylinder oil in a large two-stroke diesel engine is of great economic importance. A motor-driven cylinder lubricator for Sulzer RT-flex large two-stroke diesel engines developed by authors is in need of improving the lubricating system to lubricate cylinder parts optimally by an electronically controlled quill device according to changes of engine load and revolution speed. In order to apply the developed accumulating distributor to an integrated cylinder lubricator by the electronically controlled system as the third research stage, the lubricating system is improved in the electronically controlled quill device with a solenoid valve. In this study, the effects of lubricator revolution speed, driving pressure(or plunger stroke) and cylinder back pressure on oil feed rate and lubrication inequality rate are investigated by using the integrated cylinder lubricator system with an accumulated distribution by the electronic control(I.C.S.), and the oil feed rate and lubrication inequality rate of I.C.S. are compared with those of the motor-driven cylinder lubricator by the electronically controlled quill system equipped with an accumulating distributor(E.D.S.). It is found that the oil feed rate of I.C.S. is smaller than that of E.D.S. due to the reduction of delivery velocity by the higher delivery pressure, and the variances of lubrication inequality rate for I.C.S. have become smaller than those of E.D.S. as the driving pressure in all experimental conditions increases, except for the driving pressure of 26 bar(plunger stroke 2 mm) at the cylinder lubricator speed of 120 rpm.

• The Journal of Internal Korean Medicine
• /
• v.31 no.2
• /
• pp.189-200
• /
• 2010

Objectives : Regulatory T cells can reduce inflammation and allergic reactions through their inhibitory functions. Gardeniae Fructus(GF) is a Heat-clearing herb used in traditional Korean medicine, and a wide range of studies on its antiinflammatory effects are being carried out. The authors investigated the effect that Gardeniae Fructus has on regulatory T cells. Methods : The authors screened 14 herbs for their effects on regulatory T cells. 100mg of each herb were separately dissolved in 1ml of sterile saline and the supernatant was harvested after 10 minutes of centrifuge at 15,000 rpm. The supernatant was filtered through a 0.2 ${\mu}m$ syringe filter, and the resulting stock was refrigerated at $4^{\circ}C$. The stock was diluted before testing and used at a final concentration of $0.01{\mu}g/ml$. CD4+CD25+ T cells from healthy BALB/c spleens were used as natural regulatory T cells (nTreg), and CD4+CD25- T cells were used as reactive T cells. CD4+CD25+ and CD4+CD25- T cells were activated with anti-CD3e ($10{\mu}g/m{\ell}$)/anti-CD28 ($1{\mu}g/m{\ell}$) and cultured. IL-10 from supernatant of the culture medium was measured by IL-10 cytokine ELISA. The percentages, cell numbers, phenotype and function of CD4+CD25+ Treg cells were determined by flow cytometry. Results : Gardeniae Fructus was shown to be the most potent herb among the 14 herbs tested for suppressing CD4+CD25- reactive T cell proliferation by stimulating CD4+CD25+ natural regulatory T cells. Gardeniae Fructus induces IL-10 secretion increase by stimulating CD4+CD25+ natural regulatory T cells, and indirectly suppresses CD4+CD25- reactive T cell proliferation through increasing CD25 (IL-2 receptor $\alpha$) expression and thus promoting bonding with IL-2. Gardeniae Fructus did not directly affect CD4+CD25- reactive T cell proliferation. Conclusions : Gardeniae Fructus suppressed reactive T cell proliferation through inducing increases in IL-10 secretion and CD25 (IL-2 receptor $\alpha$) expression.

• Korean Journal of Food Science and Technology
• /
• v.41 no.3
• /
• pp.231-237
• /
• 2009

Trans free margarine stock (TFMS) was produced by lipase-catalyzed synthesis of fully hydrogenated soybean oil (FHSBO), avocado oil (AO) and palm oil (PO). A blend of FHSBO, AO, and PO with a 1:5:4 (30:150:120 g, respectively) ratio was interesterified with lipozyme RM IM(from Rhizomucor miehei) in a 1 L-batch type reactor at 65 for 12 hr, and the physicochemical and melting properties of TFMS were compared with commercial margarine. The solid fat content (%) of the TFMS was analyzed at 25, 30, and $35^{\circ}C$, respectively, while its melting point was $37.8^{\circ}C$. The trans fatty acid content of the TFMS was below 0.1%. It also had acid, saponification, and iodine values of 0.4, 173.9, and 58.6, respectively. In HPLC chromatograms of the TFMS, newly synthesized peaks of triacylglycerol molecules were observed by using reverse-phase HPLC with evaporative light-scattering detection. Normal-phase HPLC with UV detection was used to quantify tocopherols in the TFMS, indicating that its ${\alpha}-$, ${\gamma}-$ and ${\delta}$-tocopherol contents were 5.7, 2.1, and 1.7 mg/100 g, respectively.

• Journal of Life Science
• /
• v.24 no.12
• /
• pp.1316-1324
• /
• 2014

Most beta-glucans obtained from various fruit bodies of mushrooms and mushroom mycelial cultures have high-molecular weight glycoproteins, conjugated with beta-glucans. We report that isoflavone-conjugated glycolproteins (designated as gluvone) were isolated and exhibited stronger anticarcinogenic activities. Agaricus blazei mycelia (ABM) was cultured in a liquid medium containing soybean flakes for 14 days. The liquid culture was autolyzed by incubating at $53^{\circ}C$ (pH 5.5) for 3 h. A crude glycoprotein (CGP) fraction with a cytotoxic effect on a mouse ascite cancer cell line (S-180) and a human breast cancer cell line (MCF-7) was isolated from the autolyzed ABM cultures by 80% ethanol treatment. Gluvone was isolated from the CGP with Sephadex G-75 column chromatography. It exhibited a stronger anticancer effect than CGP against the S-180 cell-induced female ICR mouse ascites carcinogenesis. Gluvone with 9,400 daltons was identified as a glycoprotein conjugated with isoflavone. According to HPLC and GC analysis, in conjunction with $^1H$-NMR spectral analysis, it contained 60% carbohydrates (glucose, fructose, and ribose), 31% protein, and 2% isoflavone (daidzein and genistein), which is a novel material. These results indicate that a strong anticarcinogenic gluvone was isolated from the autolyzed product of a submerged liquid culture of ABM, suggesting that autolysis could be a useful tool to produce antitumor agents.

• Journal of Life Science
• /
• v.23 no.8
• /
• pp.1010-1018
• /
• 2013

The greenhouse whitefly, Bemisia tabaci, is considered one of the most destructive pests of crops. In this study, we aimed to determine the optimal liquid culture conditions in shake flasks for maximal sporulation of Beauveria bassiana M130 using rice bran. The optimal initial pH for the spore production of B. bassiana using extracted rice bran medium was 5.2 and $28^{\circ}C$. The screening in shake flasks of carbon and nitrogen sources resulted in the identification of an optimal medium based on 0.5% $(NH_4)_2SO_4$, with extracted rice bran 8:1. Using this medium, a production level of $2.15{\times}10^9$ spores per ml was obtained after six days from culture inoculation at $28^{\circ}C$ in a rotary shaking incubator at 130 rpm. In addition, the specific activities of extracellular enzymes of chitinase and protease were $4,296{\mu}mol$ and $375{\mu}mol$, respectively. These results suggest that Beauveria bassiana M130 could be a bio-controller for the greenhouse whitefly.

• Parasites, Hosts and Diseases
• /
• v.27 no.1
• /
• pp.9-14
• /
• 1989

Enzyme-linked immunoelectrotransfer blot (EITB) using crude worm antigen of adult Paragonimus westermani was performed for human patients sera to identify the species-specific components. Crude antigen was obtained by homogenizing and centrifuging 24-week old adult worms at 10,000 rpm for 60 minutes in phosphate buffered saline (PBS, PH 7.2) containing: Phenyl methyl sulfonyl auoride (PMSF). Gradient sodium dodecyl sulfate polyacrylamide gel electrophoresis(SDS-PAGE) was performed and blotted electrophoretically onto a sheet of nitrocellulose paper. The sheet was cut into strips and exposed to sera diluted 1 : 200 with PBS. SDS-PAGE showed 26 protein bands ranging 229 to 10 kDa. Of them 229, 91, 60, 50, 35∼31, 27, 25, 21, 17, 11 and 10 kDa components showed positive reaction with serum antibody of patients with p. westermani. Sera of patients infected with Clcnorchis sinensis reacted with 35∼31, 19, and 11 kDa bands. Human sera from cysticercosis and diphyllobothriasis cases showed non-specific cross reactions with 229, 35∼31, 27, 25 and 17kDa bands. Protein bands of 91, 60, 21 and 10kDa showed strong positive reaction without cross reactions with sera from other helminthic infections.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.52.1-52.1
• /
• 2011

최근에 에너지 자원의 고갈이 다가오는 상황에서 태양전지 분야가 주목받고 있으며 이에 대한 시장이 급격하게 확대되고 있다. 그러나 현재의 태양전지는 주를 이루고있는 실리콘태양전지의 경우 원재료 수급이 불안정하여 가격 변동이 심하다. 따라서 이를 대체할 2세대 태양전지인 박막형 태양전지의 연구가 활발히 이루어지고 있다. 박막형 태양전지 중에서도 주목받고 있는 것은 Cu(In,Ga)$Se_2$(CIGS)박막 태양전지이다. CIGS는 Ga의 농도에 따라 1.02~1.68eV의 다양한 에너지 밴드갭을 갖는 직접천이형 반도체 물질이다. 또한 $1{\times}10^5cm^{-1}$의 높은 광흡수계수를 가지고 있으며, $450{\sim}590^{\circ}C$의 고온공정에서도 매우 안정하여 열화현상이 거의 보이지 않아 박막형 광흡수층 재료로서 적합하다. 흡수층을 제조하는 방법은 여러 가지가 있지만, 본 연구에서는 균일성이 뛰어나고 원료사용효율이 높은 sputtering 방법을 사용하였다. 그리고 결정화하기위해서 유독기체를 사용하는 셀.렌.화. (selenization) 방법 대신 전자빔을 조사하는 방법을 채택하였다. sputtering을 통한 CIGS precursor을 제조하기위해 2~3개의 화합물target을 사용하는데, 대표적인 방법으로 동시에 sputtering하는 co-sputtering 방법과 각각의 단일 층을 쌓아 제조하는 stack형으로 분류된다. 본 연구는 CIGS precursor를 제조하기 앞서 CuGa 단일 층만을 제조하여 공정조건에 따른 박막을 제조하였다. 제조된 CuGa 단일층은 전자빔 처리에 따른 영향을 알아보기 위해 전자빔의 세기와 공정시간을 달리하여 특성을 알아보았다. 실험에서는 Cu:75wt%,Ga:25wt% 조성의 target을 사용하여 공정 압력을 각각 10~1mTorr로 변화시키며 실험을 실시하였으며 공정 power는 50W, 70W, 100W로 변화 시키며 실험을 실시하였다. 이때 실험의 초기진공은 turbo-molecular pump를 이용하여 $1{\times}10^{-6}torr$ 이하로 하였으며, Target과 기판사이의 거리는 모두 같은 조건으로 고정하여 실험을 실시하였다. 박막의 균일성을 증가시키기 위하여 5 rpm의 속도로 기판을 회전하였으며 기판 온도는 가열하지 않고 상온에서 전구체를 증착하였다. 그 후 전자빔의 세기를 고정 시킨 후 전자빔 조사 시간을 조절하여 전자빔 조사 전후의 특성을 각각 분석하였다. 전기적특성은 Hall effect, 4-point probe, 구조적 특성은 SEM,EDS, XRD, XRF 를 이용하여 분석하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.431-432
• /
• 2012

In the era of 20 nm scaled semiconductor volume manufacturing, Microelectronics Manufacturing Engineering Education is presented in this paper. The purpose of microelectronic engineering education is to educate engineers to work in the semiconductor industry; it is therefore should be considered even before than technology development. Three Microelectronics Manufacturing Engineering related courses are introduced, and how undergraduate students acquired hands-on experience on Microelectronics fabrication and manufacturing. Conventionally employed wire bonding was recognized as not only an additional parasitic source in high-frequency mobile applications due to the increased inductance caused from the wiring loop, but also a huddle for minimizing IC packaging footprint. To alleviate the concerns, chip bumping technologies such as flip chip bumping and pillar bumping have been suggested as promising chip assembly methods to provide high-density interconnects and lower signal propagation delay [1,2]. Aluminum as metal interconnecting material over the decades in integrated circuits (ICs) manufacturing has been rapidly replaced with copper in majority IC products. A single copper metal layer with various test patterns of lines and vias and $400{\mu}m$ by $400{\mu}m$ interconnected pads are formed. Mask M1 allows metal interconnection patterns on 4" wafers with AZ1512 positive tone photoresist, and Cu/TiN/Ti layers are wet etched in two steps. We employed WPR, a thick patternable negative photoresist, manufactured by JSR Corp., which is specifically developed as dielectric material for multi- chip packaging (MCP) and package-on-package (PoP). Spin-coating at 1,000 rpm, i-line UV exposure, and 1 hour curing at $110^{\circ}C$ allows about $25{\mu}m$ thick passivation layer before performing wafer level soldering. Conventional Si3N4 passivation between Cu and WPR layer using plasma CVD can be an optional. To practice the board level flip chip assembly, individual students draw their own fan-outs of 40 rectangle pads using Eagle CAD, a free PCB artwork EDA. Individuals then transfer the test circuitry on a blank CCFL board followed by Cu etching and solder mask processes. Negative dry film resist (DFR), Accimage$^{(R)}$, manufactured by Kolon Industries, Inc., was used for solder resist for ball grid array (BGA). We demonstrated how Microelectronics Manufacturing Engineering education has been performed by presenting brief intermediate by-product from undergraduate and graduate students. Microelectronics Manufacturing Engineering, once again, is to educating engineers to actively work in the area of semiconductor manufacturing. Through one semester senior level hands-on laboratory course, participating students will have clearer understanding on microelectronics manufacturing and realized the importance of manufacturing yield in practice.

• Applied Biological Chemistry
• /
• v.14 no.1
• /
• pp.19-27
• /
• 1971

This experiment was conducted as a preliminary test to invent the quick ripening process for soysauces. The bran koji extract of 2 kinds of mold (Asp. niger and Asp. sojae) was used as enzyme sources in order to improve the rate of enzymatic conversion of raw materials and shorten the ripening period of soysauces. Soybean koji (inoculated Asp. sojae) and steamed soybean were enzymatically decomposed for 8 hours at $40^{\circ}C$, pH 4-6 with stirring at a rate of 1500 rpm. After the enzymatic treatment, soysauces were fermented by 4 kinds of processes with the above-mentioned salt tolerant microorganisms inoculated. After 4 weeks, sensory evolution for these soysauces products and analysis of chemical components were carried out. The results obtained were summarized as follows. 1. Soysauces prepared from decomposed koji by Asp. niger enzyme complex showed higher extractables, such as total nitrogen, amino nitrogen, pure extract and reducing sugar, than any other procedure. Extracted amounts of each components of soysauces prepared from this process during 1 month were similar to those of soysauces made from general procedure (control) for 5 to 6 months. 2. According to sensory evaluation, soysauce prepared from decomposed koji also showed best taste and were similar to that of soysauces prepared by general method for 6 months.

• Korean Journal of Food Science and Technology
• /
• v.42 no.1
• /
• pp.39-44
• /
• 2010

The process of the preparation of branched-chain amino acid (BCAA)-enriched hydrolysates from corn gluten was optimized through the parameters of pre-treatment (heating and cellulosic hydrolysis), hydrolysis method (acid, protease, and microbe plus protease), concentration, and spray drying condition. The protein yield of corn gluten was increased by heating and cellulase treatments. Among three different hydrolysis methods, the combined use of microbes and protease was the most effective in terms of free amino acid (FAA) and BCAA content of the corn gluten hydrolysates. In addition, the FAA and BCAA content in the hydrolysates prepared by microbial and enzymatic combined treatment were improved by a concentration process. Spray drying conditions for the preparation of the powder from the hydrolyzed reactant were an inlet temperature of $185^{\circ}C$, outlet temperature of $80^{\circ}C$, and the use of maltodextrin as an anticaking agent. Thus, this study established an economical process for preparation of value-added hydrolysates of excellent productivity and quality, in terms of high BCAA content and product stability.