• 대한교통학회지
• /
• 제33권1호
• /
• pp.40-49
• /
• 2015

본 연구에서는 실차 실험을 통해 연료차단구역에서의 관성주행 시 연료소모량변화와 속도변화를 통해 주행 특성을 분석하고, 연료차단구역의 효과를 분석하고자 하였다. 이를 위해 인천시 지역을 대상으로 2-8% 내리막 경사 13개 지점을 실험대상지역을 선정하여 실차실험을 수행하였다. 내리막 경사를 일반주행, 관성주행 2가지 방법으로 반복 주행하고, 주행하는 동안 차량정보저장장치로부터 수집된 실시간 연료소모량, 속도, 엔진회전속도 등의 차량상태를 비교 분석하였다. 13개 내리막 구간에서 관성주행 시 절감되는 연료소모량은 일반주행 시에 비해 최소 24% 최대 78%까지 절감되는 것으로 나타났다. 주행실험구간의 연장은 평균 500m 정도로 실제 해당구간을 통과하는 동안 절감되는 연료량은 최대 30cc정도로 개별차량이 특정구간을 관성주행 함에 따라 얻는 비용차이는 크지 않을 수 있으나, 해당구간의 교통량을 고려할 때 무네미로 3구간의 경우 439m 구간에 대해 연간 356억 원의 연료비를 절감할 수 있을 것으로 분석되었다. 또한 절감된 연료소모량에 따른 오염물질 배출과 관성주행으로 인한 교통안전 향상까지 감안한다면 더 큰 편익을 기대할 수 있다.

• Tribology and Lubricants
• /
• 제34권3호
• /
• pp.84-92
• /
• 2018

Bearings are essential for reducing vibration and wear, in order to achieve high durability and increase longevity. White metal treatment of tilting pads via centrifugal casting method has the possibility of increasing durability. However, this manufacturing method has drawbacks such as long processing time, high defect rate, and harmful health effects. Laser cladding deposition technique is a powerful method that can address these issues by decreasing the processing time and providing good adhesion. In this study, we suggest optimum conditions for laser cladding deposition that can be used in industrial applications. We deposited a soft white metal layer on SCM440 that is primarily used in shafts to minimize wear of bearing pads. During the laser deposition process, we controlled factors such as laser power, powder feed rate, and laser head speed to determine the optimum conditions. In addition, we measured the hardness using micro Vickers, and performed field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, and friction tests to investigate the mechanical properties and surface characteristics for different parameters. Based on the experimental results, we suggest that laser power, powder feed rate, and laser head speed of 1.3 kW, 2.5 rpm, and 10 mm/s, respectively, constitute the optimum conditions for producing white metals using laser cladding.

• 한국임상수의학회지
• /
• 제22권4호
• /
• pp.377-381
• /
• 2005

We tried to extract bone morphogenetic protein (BMP) from the freeze-dried bovine cortical bone (FBCB) for bone graft, which were defatted with chloroform-methanol for 20 days, freeze-dried at $-80^{\circ}C$ for 7 days and sterilized by ethylene oxide gas. Two kg of FBCB were pulverized in a wheel mill to $0.5-2.0mm^3$ cubic in size. The bone particles were demineralized in 0.6N HCI for 10 days at chloroform-methanol$4^{\circ}C$ and defatted with chloroform-methanol for 6 hours at room temperature, which was going to be defatting and demineralized cortical bone (DDM). For extracting BMP, DDM was agitated continuously through 72 hours with magnetic stirrer at $4^{\circ}C$ into 12 times of volume of 6 M guanidine hydrochloride (Gdn-HCl) solution containing proteinase inhibitors to protect BMP such as 2mM N-ethylaleimide, 1mM iodoacetic acid, 1mM phenylmethylsulfonyl fluoride and a sterilizer, 1mM sodium azide. The extraction procedure was repeated for three times. All extracted solution was centrifuged at 10,000 rpm for 30 min and then, the supernatant was dialyzed with 12 times of volume of deionized water at $4^{\circ}C$ for 24-72 hours, which cut off below 6,000-8,000 molecular weight. The dialyzed specimen contained crude-BMP was centrifuged, freeze-dried, and weighted. Through these processing, we could obtained $84.9\%$ as FBCB, $17.8\%$ as DDM and $0.71\%$ as crude-BMP from the wet cortical bone without cancellous bone, marrow and muscles. The crude-BMP were obtained $68.3\%$ from the first extraction, $29.6\%$ from secondary and $2.1\%$ from tertiary, respectively. It was suggested that high yield of crude-BMP migth be explained by three-time repetition of the extraction processing for crude-BMP with Gdn-Hcl sol.

• Progress in Superconductivity
• /
• 제7권1호
• /
• pp.97-101
• /
• 2005

Bi-22l2 tubes for fault current limiter (FCL) were fabricated by centrifugal melting process. $SrSO_4$ ($10\;wt.\;\%$) was added to Bi-2212 powder to lower the melting point of Bi-22l2 and to improve the mechanical properties. The BSCCO powder was completely melted at $1300\;^{\circ}C$ using the RF furnace and then poured into rotating steel mold. The steel mold, preheated at $450\;{\circ}C{\sim}550^{\circ}C$ for 2 hour was rotated at $1020{\sim}2520\;RPM$. The solidified BSCCO tube was cooled down to room temperature in the furnace for 48 hours and separated from the mold between Bi-2212 and the mold. $ZrO_2$ solution was used to separate it easily from the mold and Ag tape was attached in the mold inner wall of the mold to analysis electrical property. Bi-22l2 tube was often cracked when the cooling rate was high. BSCCO tubes with $70{\Phi}{\times}100\;mm,\;50{\Phi}{\times}100\;mm$ and $30{\Phi}{\times}150\;mm$ size were fabricated by centrifugal melting process. The $J_{c}s$ of tubes with $50{\Phi}{\times}100\;mm{\times}4.0\;t$ and $50{\Phi}{\times}100\;mm{\times}4.l\;t$ were 178 and $74.2\;A/cm^2$ at 77K, respectively. The processing condition for Bi-2212 tube fabrication was investigated using XRD and SEM analyses.

• 수산해양기술연구
• /
• 제49권3호
• /
• pp.301-310
• /
• 2013

To suggest a standard concerning with the arrangement of bridge equipment, the authors conducted the video observations with 3CCD (charge coupled device) cameras installed on the ceil of the bridge for monitoring the working activities of two bridge teams (the skipper/mate1 and the skipper/mate2) in a Korean coastal large trawler(gross tonnage: 139) for five days from July 30th. 2010 and analyzed of the data. Work elements coded by the work activities were input on the sheet of work analysis by the time unit of 1 sec according to the time occurred. A single work element among the work activities for every 5 minutes was denoted as the number of occurrence. The frequency of equipment usage was limited only in the usage of the equipment. In the case of the navigation and the towing net two ranks were integrated and analyzed. On the other hand, in the case of the casting net and the hauling net, two processes were integrated to as one and then analyzed separately as two ranks. As the results, 15 elements of work was carried out between two bridge teams for the observation; lookout, radar, GPS plotter, fish finder, net monitor, fishing deck, RPM indicator, rudder angle indicator, compass card, for maneuver; steering, ship speed control, trawl winch operation and external communications, paper works and others. It was found that the work load of the skipper per 5 minutes accordance with the navigation, the casting net, the towing net and the hauling net are 20.5 times, 11.9 times, 38.0 times and 9.5 times respectively, the mates are 65.2 times, 66.5 times, 85.7 times and 59.1 times respectively. The radar was shown the highest frequency of the equipment usage and the next was the fish finder, the GPS plotter and the external communications in the case of the navigation. In the case of the towing net the frequency of usage was high the ranking as the radar, the net monitor, the fish finder, the GPS plotter, the steering system and the external communications. In the case of the integrated process both of the casting and hauling net the trawl winch was shown the highest frequency to the skipper and the next was the GPS plotter and the radar, and the steering system was shown the highest frequency to the mate and the next was the radar, the ship speed control system, the GPS plotter, the net monitor and the fish finder.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권1호
• /
• pp.52-59
• /
• 2005

The study was targeted to saccharify foodwastes with the cellulolytic and amylolytic enzymes obtained from culture supernatant of Trichoderma harzianum FJ1 and analyze the kinetics of the saccharification in order to enlarge the utilization in industrial application. T. harzianum FJ1 highly produced various cellulolytic (filter paperase 0.9, carboxymethyl cellulase 22.0, ${\beta}$-glucosidase 1.2, Avicelase 0.4, xylanase 30.8, as U/mL-supernatant) and amylolytic (${alpha}$-amylase 5.6, ${\beta}$-amylase 3.1, glucoamylase 2.6, as U/mL-supernatant) enzymes. The $23{\sim}98\;g/L$ of reducing sugars were obtained under various experimental conditions by changing FPase to between $0.2{\sim}0.6\;U/mL$ and foodwastes between $5{\sim}20\%$ (w/v), with fixed conditions at $50^{\circ}C$, pH 5.0, and 100 rpm for 24 h. As the enzymatic hydrolysis of foodwastes were performed in a heterogeneous solid-liquid reaction system, it was significantly influenced by enzyme and substrate concentrations used, where the pH and temperature were fixed at their experimental optima of 5.0 and $50^{\circ}C$, respectively. An empirical model was employed to simplify the kinetics of the saccharification reaction. The reducing sugars concentration (X, g/L) in the saccharification reaction was expressed by a power curve ($X=K{\cdot}t^n$) for the reaction time (t), where the coefficient, K and n. were related to functions of the enzymes concentrations (E) and foodwastes concentrations (S), as follow: $K=10.894{\cdot}Ln(E{\cdot}S^2)-56.768,\;n=0.0608{\cdot}(E/S)^{-0.2130}$. The kinetic developed to analyze the effective saccharification of foodwastes composed of complex organic compounds could adequately explain the cases under various saccharification conditions. The kinetics results would be available for reducing sugars production processes, with the reducing sugars obtained at a lower cost can be used as carbon and energy sources in various fermentation industries.

• 한국식품영양과학회지
• /
• 제39권8호
• /
• pp.1156-1164
• /
• 2010

미강유(RBO)와 달맞이꽃 종자유(EPO)를 기질로 한 다양한 몰비율(1:3, 1:4, 1:5)을 가지고 효소촉매를 이용한 재구성 지질을 합성하였다. 달맞이꽃 종자유의 주요 지방산은 필수 지방산인 linoleic acid(C18:2)와 $\gamma$-linolenic acid(C18:3n-6)가 각각 74.9%와 8.1%를 차지하였다. 비율별로 합성된 재구성 지질의 주요 지방산을 살펴보면 oleic acid, linoleic acid, $\gamma$-linolenic acid가 전체 지방산 조성의 88% 이상을 차지하였다. 합성한 재구성 지질은 $\gamma$-linolenic acid를 각각 7.2%(1:3)와 7.9%(1:4), 8.3%(1:5)로 함유하였다. 반응에 사용된 기질 및 합성된 재구성 지질의 TAG 조성을 reversed-phase HPLC를 이용하여 분석한 결과, 미강유의 비율이 증가할수록 달맞이꽃 종자유의 주요한 peak인 LLL(trilinolein) peak는 감소하였고, 새로운 peak의 형성은 점차 증가하였다. 재구성 지질 및 반응에 사용된 미강유와 달맞이꽃 종자유의 $\alpha$-, $\gamma$-, $\delta$-tocopherol 함량을 분석한 결과, 미강유는 $\alpha$-tocopherol과 $\gamma$-tocopherol이 각각 7.60, 2.11(mg/100 g) 함량을 나타내었으며, $\delta$-tocopherol은 검출되지 않았다. 달맞이꽃 종자유는 $\alpha$-tocopherol 및 $\gamma$-tocopherol은 각각 13.36과 10.82(mg/100 g)를 나타내었다. Phytosterol 함량은 달맞이꽃 종자유가 744.49 mg/100 g으로 가장 높은 수치를 보였고, 미강유는 606.64 mg/100 g이었다. 한편, scale-up한 재구성 지질의 phytosterol 함량을 분석해 본 결과, 반응하기 전 campesterol, stigmasterol 및 $\beta$-sitosterol 함량이 3시간 반응 후 감소하였다. 이로써 필수지방산인 $\gamma$-linolenic acid를 함유한 재구성지질을 효소를 이용하여 성공적으로 합성하였다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권20호
• /
• pp.9033-9038
• /
• 2014

Background: The purpose of this study was to assess the feasibility of deep inspiration breath-hold (DIBH) based volumetric modulated arc therapy (VMAT) for locally advanced left sided breast cancer patients undergoing radical mastectomy. DIBH immobilizes the tumor bed providing dosimetric benefits over free breathing (FB). Materials and Methods: Ten left sided post mastectomy patients were immobilized in a supine position with both the arms lifted above the head on a hemi-body vaclock. Two thermoplastic masks were prepared for each patient, one for normal free breathing and a second made with breath-hold to maintain reproducibility. DIBH CT scans were performed in the prospective mode of the Varian real time position management (RPM) system. The planning target volume (PTV) included the left chest wall and supraclavicular nodes and PTV prescription dose was 5000cGy in 25 fractions. DIBH-3DCRT planning was performed with the single iso-centre technique using a 6MV photon beam and the field-in-field technique. VMAT plans for FB and DIBH contained two partial arcs ($179^{\circ}-300^{\circ}CCW/CW$). Dose volume histograms of PTV and OAR's were analyzed for DIBH-VMAT, FB-VMAT and DIBH-3DCRT. In DIBH mode daily orthogonal ($0^{\circ}$ and $90^{\circ}$) KV images were taken to determine the setup variability and weekly twice CBCT to verify gating threshold level reproducibility. Results: DIBH-VMAT reduced the lung and heart dose compared to FB-VMAT, while maintaining similar PTV coverage. The mean heart $V_{30Gy}$ was $2.3%{\pm}2.7$, $5.1%{\pm}3.2$ and $3.3%{\pm}7.2$ and for left lung $V_{20Gy}$ was $18.57%{\pm}2.9$, $21.7%{\pm}3.9$ and $23.5%{\pm}5.1$ for DIBH-VMAT, FB-VMAT and DIBH-3DCRT respectively. Conclusions: DIBH-VMAT significantly reduced the heart and lung dose for left side chest wall patients compared to FB-VMAT. PTV conformity index, homogeneity index, ipsilateral lung dose and heart dose were better for DIBH-VMAT compared to DIBH-3DCRT. However, contralateral lung and breast volumes exposed to low doses were increased with DIBH-VMAT.

• 대한기계학회논문집A
• /
• 제35권8호
• /
• pp.869-876
• /
• 2011

동적 특성에 영향을 받는 롤 코팅의 평형적인 두께 예측과 불안정성을 분석함은 중요하다. 본 연구에서는 강체/변형롤 사이에서 생성되는 마이크로 코팅액의 두께를 예측하기에 앞서 압착되어 회전하는 두 롤 사이에 발생하는 접촉 압력의 분포와 변형롤의 변형 형상을 예측하고자 한다. 또한 변형롤의 재료상수와 롤의 속도 및 마찰계수 그리고 압착 크기 등의 변수들에 대한 접촉압력분포를 수치적인 방법으로 측정하여 유효한 변수들의 영향을 분석하고자 한다. 수치해석 방법으로는 유한요소법을 사용하였고 두 롤을 모델링하여 변형롤에 고무물성치를 초탄성체 모델로 가정하여 일반적으로 사용되는 Mooney Rivlin 계수를 사용하였고 40~80rpm 사이의 속도로 회전할 때 접촉 형상 및 압력분포를 분석하였다. 접촉형상의 경우 압착정도에 따라 변하고 그외 변수들에는 영향을 받지 않고 접촉압력의 경우 변형롤의 물성치와 압착정도에 의해 주요한 영향을 받고 속도 및 마찰계수에는 영향을 받지 않음을 알 수 있다.

• 한국응용과학기술학회지
• /
• 제32권4호
• /
• pp.758-766
• /
• 2015

Dextran is a generic term for a bacterial exopolysaccharide synthesized from sucrose and composed of chains of D-glucose units connected by ${\alpha}$-1,6-linkages by using dextransucrases. Dextran could be used as vicosifying, stabilizing, emulsifying, gelling, bulking, dietary fiber, prebiotics, and water holding agents. We isolated new strain capable of producing dextran from Korean traditional kimchi and identified as Leuconostoc sp. strain JYY4. Batch fermentation was conducted in bioreactor with a working volume of 3 L. The media was MMY and 15% (w/v) sucrose. Mineral medium consisted of $3.0g\;KH_2PO_4$, $0.01g\;FeSO_4$, $H_2O$, $0.01g\;MnSO_4$, $4H_2O$, $0.2g\;MgSO_4\;7H_2O$, 0.01 g NaCl, $0.05g\;CaCl_2$ per 1 liter deionized water. The pH of media was initially adjusted to 6.0. The inoculation rate was 1.0% (v/v) of the working volume. Temperature was maintained at $28^{\circ}C$. The agitation rate was 100 rpm. The production pattern of dextran was associated with the cell growth. After 24 hr dextran reached its highest concentration of 59.4 g/L. The sucrose was consumed completely after 40 hr. Growth reached stationery phase when sucrose became limiting, regardless of the presence of fructose or mannitol. When the specific growth rate was 0.54 hr-1, utilization averaged 5.8 g/L-hr. The yield and productivity of dextran were 80% and 2.0 g/L-hr, respectively. Dextrans produced by were separated to two different size by an alcohol fraction method. The size of high molecular weight dextran (45% alcohol, v/v), less soluble dextran, was between MW 500,000 and 2,000,000. Soluble dextran (55% alcohol, v/v) was between 70,000 and 150,000. The molecular weight average of total dextran (70% alcohol, v/v) was between 150,000 to 500,000. The enzymatic hydrolyzates of total dextran of ATCC 13146 showed branched dextrans by Penicillium dextranase contained of glucose, isomaltose, isomaltotriose, and isomaltooligosaccharides greater than DP4 (degree of polymerization) that had branch points. Compounds greater than DP4 were branched isomaltooligosaacharides. Hydrolysates by the Lipomyces dextranase produced the same composition of oligosaccharides as those by Penicillin dextranase.