• Tunnel and Underground Space
• /
• v.23 no.6
• /
• pp.480-492
• /
• 2013

After the introduction of geothermal power generation technology based on engineering reservoir creation that can be applied on non-volcanic region, industrial need for studies on the efficient and economic execution of costly deep-depth drilling work becomes manifest increasingly. However, since it is very difficult to predict duration and cost of boring work with acceptable reliability because of many uncertain events during the execution, efficient and organized work management for drilling is not easily achievable. Especially, the round trip that discretely occurs because of the abrasion of bit takes more time as the depth goes deeper and it has a great impact on the work performance. Therefore, a technology that can simulate the occurrence timing and depth of round trip in advance and therefore optimize them is essentially required. This study divided the abrasion state of bit into eight steps for simulation cases and developed a forecast algorithm, i.e., TOSA which can analyze the depth and timing of round trip occurrence. A methodology that can divide a unit section for simulation has been suggested; while the Bourgoyne and Young model has been used for the forecast of drilling rates and bit abrasion extent by section. Lastly, the designed algorithm has been systemized for the convenience of the user.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.2
• /
• pp.112-118
• /
• 2023

Internet of Things(IoT) technology is developing to a stage where the Internet and objects are connected and objects themselves analyze and judge data to interconnect the real world and the virtual world in real time. This technology consists of sensors, actuators, devices, and networks, and it is being applied in various fields. As the number of IoT devices and applications increases, data traffic also increases. In this paper, a messaging system is designed and implemented in order to analyze the performance between an IoT device and MQTT broker. The experimental was performed to measure MQTT-based round-trip time and message transmission time between the IoT device and the broker. The result shows that there is no packet loss, and propagation delay affects round-trip time.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.105-107
• /
• 2006

As internet streaming data increase, transport protocol such as TCP, TGP-Friendly is important to study control transmission rate and share of Internet bandwidth. In this paper, we propose a TCP-Friendly protocol using Neural Network for media delivery over wired Internet which has various traffic size(PTFRC). PTFRC can effectively send streaming data when occur congestion and predict one-step ahead round trip time and packet loss rate. A multi-layer perceptron structure is used as the prediction model, and the Levenberg-Marquardt algorithm is used as a traning algorithm. The performance of the PTFRC was evaluated by the share of Bandwidth and packet loss rate with various protocols.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.5
• /
• pp.1520-1524
• /
• 2000

TCP congestion control algorithm prevents network congestion through the control of outgoing traffic size. The network, therefore, should monitor the incoming traffic size of a TCP to determine whether or not a TCP follows standard congestion control algorithms. Some TCP friendly test algorithms are proposed, But, these algorithms cannot be used in real environments because a router in a network does not know the RTT of a TCP flow. In this study, we propose a new RTT determination algorithm that can be used in a router. Our proposed algorithms is validated through the simulation studies.

• Journal of IKEEE
• /
• v.7 no.2 s.13
• /
• pp.260-264
• /
• 2003

Among many factors to affect the network performance, this paper analyses how the buffer size of NIC(Network Interface Card) can affect web server and LAN(Local Area Network). We use the ns-2 which is defacto network simulation tool to observe the changes in drop rate, throughput, RTT(Round Trip Time), effective throughput depending on varying buffer sizes. And we analyse the effect of NIC buffer size on the web traffic in Ethernet.

• 한국IT서비스학회:학술대회논문집
• /
• 2006.05a
• /
• pp.241-248
• /
• 2006

네트워크 거리 (Network distance : 일반적으로 ping이나 traceroute 등으로 측정 가능한 round trip time 등 네트워크 상에서 패킷 전송 시간) 추정 기법은 인터넷상의 많은 응용프로그램들에서 유용하게 사용된다. 예를 들면 다수의 서버를 인터넷상에 설치하고자 하는 경우 사용자들 간의 네트워크 거리를 알고 있다면 서버와 사용자간의 왕복 전송 시간 (Round Trip Time)등을 최소화할 수 있도록 서버를 분산하여 설치하는 구성을 도출해 낼 수 있을 것이다. Peer to Peer 응용 프로그램들에서도 이 네트워크 거리 정보는 매우 유용하다. 기존에 존재하는 추정 기법들은 대부분 유클리드 공간 좌표 기반 기법들로서 유클리드 좌표 상의 거리가 실제 네트워크 거리와 유사하도록 유클리드 공간 좌표를 지정한다. 그러나 이런 방법들의 문제점은 인터넷 상의 네트워크 거리가 삼각 부등식을 만족하지 않는 경우가 존재하는 등 유클리드 공간의 기본적인 가정을 만족하지 못한다는데 있다. 이런 문제점 때문에 새로운 모델이 필요하고, 이 논문에서는 가상 토폴로지(Virtual Topology) 모델과 지역 조정 항 (Local Adjustment Term) 모델을 제시하고, 기본적인 성능 분석을 시도하였다.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.159-165
• /
• 2023

This study was limited to the underwater search part among water accidents on the inland water surface, and analyzed five underwater search methods and lifesaving time at 5m underwater. The subjects of the experiment were 10 people. The semi-circle search took the longest with 259 seconds, and the modified round-trip search took 78.60 seconds, showing a significant difference with an average of 180.04 seconds. Subjects B and D showed similar values, with average underwater search times of 199 seconds and 202 seconds, respectively. Subject C showed a significantly higher average underwater search time of 209 seconds. The reason seems to be from increased anxiety and excessive tension due to poor underwater watch. Subject A showed a significantly lower underwater search time of 187 seconds. The reason seems to be the result of E's experience being the most among the test subjects and his rich diving experience in the Han River with poor visibility. As for convenience, semicircle search showed a low score of 6~7, and modified reciprocal search showed a high score of 8~9. The most suitable rescue method as an underwater search method in the Han River where visibility is poor is determined to be a modified round-trip search method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7C
• /
• pp.608-615
• /
• 2007

Generally time of arrival (TOA) information via two way communications can be derived by accurate round trip time (RTT) between two devices. However, response time demanded in RTT measurement is long, a serious TOA error is caused by each different clock drift between two devices. In order to solve this problem, we propose the TOA and time difference of arrival (TDOA) estimation scheme with mitigating clock drift effect. To verify the performance of proposed method, we compared the proposed scheme with one way based TDOA acquisition method introduced by IEEE 802.15.4a Task Group and then we could conclude that the proposed method has better performance over other methods.

• Fire Science and Engineering
• /
• v.24 no.1
• /
• pp.8-14
• /
• 2010

It is more important to study for reducing the evacuation time of occupant in fire, because the building has been taller and deeper. It has known that elevator was not safe in fire situation. So, the using elevator for evacuation has been prohibited. But the study of elevator evacuation is progressed with designing the elevator safe from flame and smoke. This study analyze the consideration factors for the calculation of elevator evacuation time. The factors for elevator evacuation calculation is starting time, round trip time. And round trip time is divided into standing time and travel time. The elevator evacuation time can be calculated by compounding these factors and adding the efficiency. For using elevator to evacuate, we need additional study for smoke control, compartment, water proof and safe electric power supply.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.11
• /
• pp.965-974
• /
• 2012

As the use of smart devices has become popular, the number of smart devices connected to network has increased and the amount of traffic from them has grown rapidly. The management of mobile traffic and IP address for smart devices in an enterprise network is crucial problem for efficient operation of network. The information about connection type of a terminal host to the network will be very useful for stable and efficient management of an enterprise network. Also, this information might be used to identify NAT device. In this paper, we propose a methodology to identify the connection type of a terminal host using RTT (Round-Trip-Time) value extracted from captured packets. We prove the feasibility of our proposed method in a target campus network.