• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.1
• /
• pp.160-169
• /
• 1998

The purpose of this study for the prediction of fatigue crack propagation behavior, Stress Intensity Factor(F) of round bar with 3-Dimensional half circular, semi-elliptical icro surface crack under rotary bending stress for the variable aspect, size, rotation angle was analyzed by Boundary Element Method (BEM). It is predicted that behavior of crack growth is half circular or circular crack (b/a.geq.1) and propagate to b/a.leq.0.85.

• Proceedings of the IEEK Conference
• /
• 2000.06c
• /
• pp.81-84
• /
• 2000

Scheduling algorithm proposed in this paper is based on both DWRR(Dynamic Weighed Round Robin) method and QLT(Queue Length Threshold) method. The proposed scheduling algorithm guarantees delay property of realtime traffic, not considered in previous DWRR method, with serving realtime traffic preferentially by using RR(Round Robin) method which service each channel equally and QLT algorithm that is dynamic time priority method. Proposed cell scheduling algorithm may increase some complexity over conventional DWRR scheme because of delay priority based cell transmission method. However, due to reliable ABR service and congesition avoidance capacity, proposed scheduling algorithm has good performance over conventional DWRR scheme. Also, delay property based cell transmission method in proposed algorithm minimizes cell delay and requires less temporary buffer size

• Journal of Mechanical Science and Technology
• /
• v.17 no.4
• /
• pp.617-625
• /
• 2003

Effects of Injector nozzle geometry and operating pressure conditions such as opening pressure, ambient pressure. and injection pressure on the transient fuel spray behavior have been examined by experiments. In order to clarify the effect of internal flow inside nozzle on the external spray, flow details Inside model nozzle and real nozzle were alto investigated both experimentally and numerically. for the effect of injection pressures, droplet sizes and velocities were obtained at maximum line pressure of 21 MPa and 105 MPa. Droplet sizes produced from the round inlet nozzle were larger than those from the sharp inlet nozzle and the spray angle of the round inlet nozzle was narrower than that from the sharp inlet nozzle. With the increase of opening pressure, spray tip penetration and spray angle were increased at both lower ambient pressure and higher ambient pressure. The velocity and size profiles maintained similarity despite of the substantial change in injection pressure, however, the increased injection pressure produced a higher percentage of droplet that are likely to breakup.

• Journal of information and communication convergence engineering
• /
• v.8 no.5
• /
• pp.519-523
• /
• 2010

In Gen-2 RFID system, the initial value of $Q_{fp}$, which is the slot-count parameter of Q-algorithm, is not defined in the standard. In this case, if the number of tags within the reader's identification range is small and we let the initial $Q_{fp}$ be large, the number of empty slot will be large. On the other hand, if we let the initial $Q_{fp}$ be small in spite of many tags, almost all the slots will be collided. As a result, the performance will be declined because the frame size does not converge to the optimal point quickly during the query round. In this paper, we propose a scheme to allocate the optimal initial $Q_{fp}$ through the tag number estimation before the query round begins. Through computer simulations, it is demonstrated that the proposed scheme achieves more stable performance than Gen-2 Q-algorithm.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.2
• /
• pp.62-66
• /
• 1996

Since 1980, Korea Research Institute of Standards and Science (KRISS) have performed 8 round robin tests in gauge block measurement in order to evaluate the measurement capability and the state of environment control of National Calibration and Test Institutions. Two sets of five gauge blocks (nominal size : 1, 3, 10, 25, 100 mm) having different thermal expansion coefficients for each set were circulated for the measurement, and the measurement results were collected and analyzed to evaluate the traceability to the standard of KRISS. The method and results of the test are presented.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.9
• /
• pp.174-180
• /
• 2000

A reliable analytic model that determines the cross sectional shape of a workpiece(material) in round-oval(or oval-round) pass sequence has been developed. the cross sectional shape of an outgoing workpiece is predicted by using the linear interpolation of the radius of curvature of an incoming workpiece and that of roll groove to the roll axis direction. The requirements we placed on the choice of the weighting function were to ensure boundary conditions specified. The validity of the analytic model has been examined by hot rod rolling experiment with the roll gap and specimen size changed. The cross sectional shape and area of a workpiece predicted by the proposed analytic model were good agreement with those obtained experimentally. It was found that the analytic model has not only simplicity and accuracy for practical usage but also save a large amount of computational time compared with finite element method.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.105-107
• /
• 2006

As internet streaming data increase, transport protocol such as TCP, TGP-Friendly is important to study control transmission rate and share of Internet bandwidth. In this paper, we propose a TCP-Friendly protocol using Neural Network for media delivery over wired Internet which has various traffic size(PTFRC). PTFRC can effectively send streaming data when occur congestion and predict one-step ahead round trip time and packet loss rate. A multi-layer perceptron structure is used as the prediction model, and the Levenberg-Marquardt algorithm is used as a traning algorithm. The performance of the PTFRC was evaluated by the share of Bandwidth and packet loss rate with various protocols.

• Korean Journal of Veterinary Research
• /
• v.32 no.1
• /
• pp.111-115
• /
• 1992

A round, milkish white mass, approximately $4{\times}4{\times}5cm$ in size was found at the cranial part of the left kidney from a New Zealand White rabbit which was used as an untreated control animal in the safety evaluation test in the Toxicology Research Center, Korea Research Institute of Chemical Technology. The mass was lobulated and encapsulated. The cut surface revealed several round well-circumscribed lobules which were 0.5-3cm in diameter. No metastasis was observed. The microscopic features consisted of blastema and epithelial structures at variable stages of differentiation including primitive tubules, ducts, glomeruloid bodies. Normal mesenchymal cells were distributed among them. A diagnosis of nephroblastoma was made on the basis of the gross and microscopic features.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.3
• /
• pp.348-357
• /
• 1998

The flow characteristics inside U-bend tube of the laminated plate heat exchanger were numerically investigated. The behavior of fluid flow, and the variations of the faulty area and friction factor are examined according to the distance between the span and the wall and the diameter of the round attacked to the end of span. The results show that the diameter(d) of the round attached to the span is mainly associated with the smooth circulation of fluid flow rather than the size of faulty area and the friction factor. As the distance($\ell$) between the span and the wall decreases, the faulty area decreases, however the friction factor dramatically increases. It is also found that one can obtain a good result in the view of the flow characteristics and pressure drop at d=7.5mm and $\ell$=30.5mm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4156-4162
• /
• 2013

This study was peformed to determine optimum induction heating conditions for a round bar of crankshaft. Four induction heating conditions were proposed and evaluated, employing numerical method, based on electromagnetic and sequential heat transfer analyses, resulting in optimum induction heating conditions which are finally proposed based on peak temperatures at heating zone and minimum temperature gradient through thickness of a round bar after 1 hour induction heating.