• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.7
• /
• pp.113-120
• /
• 2021

An experimental device was designed to control the opening of a damper via operating the folding blade drive of the device and to control the amount of air flowing through the damper. In addition, an inverter was installed in the blower to control its fan rotation speed and hence the amount of air flowing through the damper. An experimental study was conducted on the opening of the folding blade damper and changes in the rotational speed of the blower. From the results, the theoretical air volume of the folding blade damper and experimental air volume were observed to be in good agreement within an error range of ±3%. As the mass flow rate of the air passing through the folding blade damper increases proportionally with the changes in damper opening and fan rotation speed, the performance of the damper can be controlled proportionally. The mass flow rate was also observed to increase linearly; therefore, the mass flow rate of the air passing through the folding blade damper increases proportionally with changes in the rotation speed of the blower, such that the performance of the damper is proportional to a constant air volume even with varying rotation speeds of the blower.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.9-14
• /
• 2006

The authors aim to establish the theory necessary for developing the free gyrocompass. The following considerations are taken. One is to suggest north-finding principle by the angular velocity of the earth's rotation, and the other is to suggest that the motion rate of the spin axis in the free gyro frame is transformed into the platform fame and this transformed rate is again transformed into the NED navigation frame. After transformation ship's heading is obtained using the fore-aft and athwartship components of the motion rate of the spin axis in the NED frame In addition it was suggested how to solve the transformation matrix necessary for transforming each frame.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.18-28
• /
• 1998

A laboratory experiment was made of a control of temperature oscillation in Czochralski convection. Numerical computation was also made to delineate the control of temperature oscillation. The suppression of temperature oscillation was achieved by varying the rotation rate of crystal rod ($\Omega=\Omega_0(1+A sin 2{\pi}ft/t_p)$), where A denotes the amplitude of rotation rate and f the frequency factor. Based on the inherent dimesionless time period of temperature oscillation ($t_p$), the suppression rate of temperature oscillation was characterized by the mixed convection parameter ($0.217{\leq}Ra/PrRe^2{\leq}1.658$). The optimal values of A and f were also scrutinized. To understand the suppression mechanism of temperature oscillation, the controls of isotherm($\theta$) and equi-vorticity($\omega$) were investigated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.73-76
• /
• 2004

High-temperature Superconductor(HTS) tubes were fabricated in term of different processing variables such as preheating temperature, speed of mold rotation and cooling rate by centrifugal forming method. For powder melting by induction the optimum range of melting temperatures and preheating temperature were $1050^{\circ}C{\sim}1100^{\circ}C$ and $550^{\circ}C$ for 30min, respectively. The mould roating speed was 1000rpm. A tube was annealed at $840^{\circ}C$ for 72hours in oxygen atmosphere. The plate-like grains were well developed along the roating direction and typical grain size was about more than $40{\mu}m$. It was found that Ic values increased with increasing the preheating temperature and speed of mold rotation. While Ic decreased with increasing the cooling rate. The measured Ic in $50mm{\times}70mm{\times}2.5mm$ tube was about 896Amp.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.5
• /
• pp.468-472
• /
• 2005

High-temperature Superconductor(HTS) tubes were fabricated in term of different processing variables such as preheating temperature, speed of mold rotation and cooling rate by centrigugal forming method. For powder melting by induction the optimum range of melting temperatures and preheating temperature were $1050{\circ}C{\sim}1100{\circ}C\;and\;550{\circ}C\;for\;30\; min$, respectively The mould roating speed was 1000 rpm. A tube was annealed at $840 {\circ}C$ for 72 hours in oxygen atmosphere. The plate-like grains were well developed along the loafing direction and typical grain size was about more than $40{\mu}$. It was found that Ic values increased with increasing the Preheating temperature and speed of mold rotation. While Ic decreased with increasing the cooling rate. The measured Ic in $50mm{\times}70mm{\times}2.5mm$ tube was about 896 Amp.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.1
• /
• pp.143-150
• /
• 2003

This study deals with the stress-strain-strain rate behaviour of overconsolidated clay. Consolidated-drained stress path tests were performed on the stress-time dependent condition. Stress history consists of rotation angle of stress path, overconsolidation ratio, and magnitude of length of recent stress path. Time history includes loading rate of recent and current stress path. Test results show that all influence factors have an increasing strain rate with time, and the strain rate varies with the change of the rotation angle of stress path. With the increase of overconsolidation ratio and loading rate of current stress path, the strain rate also increases. For the stress history, correlation between stress-strain and strain rate is indicated but the time history is not.

• Geophysics and Geophysical Exploration
• /
• v.26 no.4
• /
• pp.238-267
• /
• 2023

Studies on Earth's rotation and tide since the 19th century are briefly summarized. The theories of precession, nutation, polar motion, and periodic/secular changes in the rate of rotation are described individually. In addition, a brief review of the Milankovitch theory - the hypothesis of the relationship between the Earth's spin/orbital rotational state and the ice ages - is given. Finally, Earth's tides and their theoretical models are briefly explained. Some detailed technical content is summarized in the appendices.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.11
• /
• pp.85-92
• /
• 2021

In this paper, a method for effectively detecting rotated face and rotation angle regardless of the rotation angle is proposed. Rotated face detection is a challenging task, due to the large variation in facial appearance. In the proposed polar coordinate transformation, the spatial information of the facial components is maintained regardless of the rotation angle, so there is no variation in facial appearance due to rotation. Accordingly, features such as HOG, which are used for frontal face detection without rotation but have rotation-sensitive characteristics, can be effectively used in detecting rotated face. Only the training data in the frontal face is needed. The HOG feature obtained from the polar coordinate transformed images is learned using SVM and rotated faces are detected. Experiments on 3600 rotated face images show a rotation angle detection rate of 97.94%. Furthermore, the positions and rotation angles of the rotated faces are accurately detected from images with a background including multiple rotated faces.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.29 no.2
• /
• pp.23-29
• /
• 2023

Background: There is still controversy as to whether hip external rotation and dorsiflexion selectively activate the vastus medialis obliquus (VMO) during straight leg raise exercise. Due to the anatomical characteristics, hip adduction must be preceded to activate the VMO. In this study, the activities of the rectus femoris (RF), vastus lateralis (VL), VMO were measured by adding the hip adduction movement to the straight leg raise exercise with hip 45° external rotation and straight leg raise exercise with hip 45° external rotation and dorsiflexion. Through this, we want to find out whether the VMO is selectively activated. Methods: Thirteen healthy participants performed straight leg raise exercise with hip 45° external rotation, straight leg raise exercise with hip 45° external rotation and dorsiflexion, straight leg raise exercise with hip 45° external rotation and adduction, straight leg raise exercise with hip 45° external rotation and adduction and dorsiflexion was randomly performed. Through this, EMG data of the RF, VL, VMO were collected. Results: During the straight leg raise exercise, hip adduction increased the activity of the VMO and VL, no significant difference was found(p>.05). However, in the VMO/VL ratio, straight leg raise exercise with hip 45° external rotation and adduction and dorsiflexion activated the VMO and the VL at a ratio of about 1:1, It showed a significantly higher rate than straight leg raise exercise with hip 45° external rotation(p<.05). Conclusion: During the straight leg raise exercise, hip adduction is considered to be an important movement that can selectively induce the activity of the VMO. Therefore, follow-up studies on this should be conducted.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.5
• /
• pp.135-142
• /
• 2009

Since hold-type display systems have been developed, frame-rate up conversion (FRUC) is an essential technique to improve the temporal resolution in the display. FRUC improves the temporal resolution by interpolating one or multiple intermediate frames between two adjacent frames. In this paper, a new frame-rate up-conversion algorithm based on bilateral motion refinement with rotation is proposed. First, we perform bi-directional motion estimation between adjacent two frames to obtain a motion vector for each block. Then, we apply a modified median filtering to motion vectors for outlier-rejection and motion field smoothing. The filtered motion vectors are updated by the bilateral motion refinement with rotation. After the refined motion vector is obtained, the intermediate frame is generated by applying the overlapped block motion compensation (OBMC). Experimental results show that the proposed algorithm provides a better performance than the previous methods subjectively and objectively.