• Development and Reproduction
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2003

Most animals, including human beings, live in a cyclic pattern of lift that is influenced by the ambient changes of environment. The regular changes occurred by rotation of the Earth itself its revolving around the Sun, and the local environment, are reflected by the distinct behavior in the living organisms. These regular changes of environment have been imprinted into the genes within the living organisms through the evolutionary process over a long period of time. The genes are expressed by rhythms during the process of fetal development followed by growth. The environmental modifications ultimately are settled in genes, serving as a biological clock that is located putatively in the hypothalamus. Thus the biological clock governs a large number of rhythms and affects the time of birth and death lift expectancy, behavior, physiology, cell division, biochemical reaction, etc. The rhythms are readjusted to the changes of environmental cues. The biological clock has the great advantage of predicting and preparing the regular changes of environment.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2003.10a
• /
• pp.103-103
• /
• 2003

The purpose of this study is to evaluate an efficacy of in vitro differentiated human embryonic stem (hES, MB03) cells expressing Nurr1 in relief of symptomatic motor behavior of Parkinson's disease (PD) animal models MB03 was genetically modified to express Nurr1 protein and was induced to differentiate according to 2-/4+ protocol using retinoic acid and ascorbic acid. The differentiation-induced cells were selected for 10 to 20 days thereafter in N2 medium. Upon selection, cells expressing GFAP, TH, or NF200 were 38.8%, 11%, and 20.5%, respectively. in order to examine therapeutic effects of the differentiated cells in PD animal model, rats were unilaterally lesioned by administration of 6-kydroxydopamine HCI (6-OHDA) into medial forebrain region (MFB, AP -4.4 mm, ML 1.2 mm, DV 78 mm with incision bar set at -2.4 mm), as a reference to bregma and the surface of the skull. Confirmation of successful lesion by apomorphine-induced rotational behavior, differentiated cells were transplanted into the striatum (AP 1.0, ML 3.5, DV -5.0; AP 0.6, ML 2.5, DV -4.5). Improvements of asymmetric motor behavior by the transplantation were examined every two weeks after the surgery. In two weeks, numbers of rotation by the experimental rats were $-14.8 \pm 33.9%$ (P<0.05) of the number before transplantation, however, the ratio increased slightly to $13.6 \pm 56.3%$ in six weeks. In contrast, the ratio of sham-grafted animals ranged from 112.3+8.5% to 139.2+28.9% during the examination. Immunohistochemical studies further confirmed the presence, survival, migration, and expression of TH of the transplanted human cells.

• Journal of Environmental Science International
• /
• v.27 no.1
• /
• pp.27-38
• /
• 2018

This study was carried out in the Bukhan River in the summer of 2014 and 2015, to identify the relationship between geosmin and the morphological changes in Anabaena. Identification of Anabaena was conducted using morphological and molecular analyses. Anabaena in this study was similar to Anabaena circinalis, A. crass, and A. spiroides with regard to regular coils, vegetative cell, akinete shape, and size, hoever, it was distinguishabl from A. crass and A. spiroides because of its larger trichome coil size. Additionally, the sequences of phycocyanin (PC) gene from Anabaena showed a 99% genetic similarity with A. circinalis NIES-1647 strain. The coil diameter of trichome ranged from 106 to $899{\mu}m$, and the diameter and abundance showed an insignificant positive correlation (r=0.544, p<0.05). The result of relationship between the coil diameter and the cell number per 360-degree rotation was kept at $33.8{\pm}5.2$ cells per $100{\mu}m$ diameter despite variable diameter. The average geosmin concentrations in 2014 and 2015 were investigated to be 99 ng/L and 35 ng/L, respectively. A. circinalis cell density contributed considerably to the change in geosmin and was positively correlated with geosmin concentration (2014; r=0.599, p<0.01, 2015; r=0.559, p<0.01). Our results suggest that geosmin and coil diameter could be estimated with the help of cell density.

• Journal of Sensor Science and Technology
• /
• v.16 no.1
• /
• pp.17-23
• /
• 2007

This paper presents a miniaturized turn-counting sensor (TCS) where the geomagnetism and high-rpm rotation of ammunition are used to detect the turn number of ammunition for applications to small-caliber turn-counting fuzes. The TCS, composed of cores and a coil, has a robust structure with no moving part for increasing the shock survivability in the gunfire environments of ${\sim}30,000$ g's. The TCS is designed on the basis of the simulation results of an electromagnetic analysis tool, $Maxwell^{(R)}$3D. In experimental study, the static TCS test using a solenoid-coil apparatus and the dynamic TCS test (firing test) have been made. The presented TCS has shown that the induction voltage of $6.5{\;}mV_{P-P}$ is generated at the magnetic flux density of 0.05 mT and the rotational velocity of 30,000 rpm. From the measured signal, the TCS has shown the SNR of 44.0 dB, the nonlinearity of 0.59 % and the frequency-normalized sensitivity of $0.26{\pm}0.01{\;}V/T{\cdot}Hz$ in the temperature range of $-30{\sim}+43^{\circ}C$. Firing test has shown that the TCS can be used as a turn-counting sensor for small-caliber ammunition, verifying the shock survivability of TCS in high-g environments.

• Journal of Korean Society of societal Security
• /
• v.1 no.2
• /
• pp.61-66
• /
• 2008

More than 70% of Korea consists of mountainous area and during the construction of roads and railroads many cut-slopes are inevitably formed. A number of environmental factors, such as the rainy season and frost heave during winter/thaw during spring, can result in rock falls and landslides. The failure of slopes is increasing every year and can cause damage to vehicles, personal injury and even fatality. In order to help protect people and property, there is a need for real-time monitoring systems to detect the early stages of slope failures. In this respect, the GMG has been using Translation Rotation Settlement (TRS) sensor units installed on slopes to monitor movement in real-time. However, the data lines of this system are vulnerable and the whole system can be damaged by a single lightning strike. In order to overcome this, GMG have proposed the use of Ubiquitous Sensor Networks (USN). The adoption of a USN system in lieu of data cables can help to minimize the risk of lightning damage and improve the reliability of slope monitoring systems.

• Journal of Biosystems Engineering
• /
• v.41 no.1
• /
• pp.21-33
• /
• 2016

Purpose: In order to ensure that vegetable seedlings (with a soil block around their roots) are planted in an upright orientation after metering in a vegetable transplanter, they need to be dropped freely from a certain height. The walk-behind hand-tractor-powered machines do not have sufficient space to drop the seedlings from that height. In the present work, a hopper-type planting device was developed for the walk-behind hand-tractor-powered vegetable transplanter to ensure that the soil block seedlings are planted in an upright orientation. Methods: Various dimensionless terms were developed based on the dimensional analysis approach, and their effect on the planting of soil block seedlings in an upright orientation (planting efficiency) was studied. The optimum design dimensions of the hopper-type planting device were identified by the Taguchi method of optimization. Results: The ratio of the height of free fall to the sliding distance of the seedling on the surface of the hopper had the highest influence on planting efficiency. The planting efficiency was highest for plants with a height $15{\pm}2cm$. The plant handling Froude number, in interaction with the design of the hopper-type planting device, also significantly affected the planting efficiency. Of the hopper design factors, the length of the slide of the seedlings on the surface of the hopper was most important, and induced sufficient velocity and rotation to cause the seedling to fall in an upright orientation. An evaluation of the performance of the planting device under actual field conditions revealed that the planting efficiency of the developed planting device was more than 97.5%. Conclusions: As the seedlings were fed to the metering device manually, an increase in planting rate increased missed plantings. The planting device can be adopted for any vegetable transplanter in which the seedlings are allowed to drop freely from the metering device.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.32 no.3
• /
• pp.171-177
• /
• 2018

The purpose of this study was to evaluate the reliability and the validity of Deficiency and Excess Pattern Identification Questionnaire. The number of subjects enrolled in this study was 248, from July 2015 to March. 2016. The surveys was conducted two times with 3 month interval. The Cronbach's ${\alpha}$ analysis for internal reliability, Pearson Correlation Coefficient analysis for test-retest reliability were conducted. Factor analysis with varimax rotation for construct validity was used. Kappa analysis for diagnostic reliability were used. The significant p-value was < .05. The Cronbach's ${\alpha}$ was .929 in Deficiency and .932 in Excess questionnaire. The reliabilities between test and retest Intra Correlation Coefficient (ICC) was .71-.762 in the Deficiency, and .58-.786 in Excess questionnaire, respectively. Deficiency was divided by five factors, and Excess four factors. The factor convergence was 72.54% in the Deficiency and 67.5% in Excess questionnaire. The test-retest agreement of four pattern was 68.5% and Kappa was .530. This study reveals that Deficiency and Excess Pattern Identification Questionnaire is a reliable and valid. However, further study to validate the questionnaire is needed.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.194-195
• /
• 1982

Recommendaton: These are the highlights of the findings of the Timber Consumption Survey carried out by the Project in 1966, and covering consumption for the period from 1961 to 1965. The survey was oriented towards consumption for structural, commercial and industrial purposes and existing estimates for local (village-level) consumption as fuel and the like were adopted. A full report on the survey was submitted to the Bureau of Forestry in 1966. Long-term Trends: After allowance for anticipated population increase, this ten year's increase in industrial wood consumption represents a gain of about 30% in per capita consumption (from 0.0913 cu.m. per capita to 0.118 cu.m. per capita). This is only about half the expected general economic growth of about 75% (7% per annum). It is therefore likely (a) that the 1975 estimate is conservative, (b) that the consumption demand beyond 1975 may be expected to build up at a greatly increased rate. Estimated income elasticity coefficients are high, and with expected ir,creases in prosperity and population, the consumption is expected to rise to 10 million cu. meters by the year 2,000. Consumption Pattern: The breakdown of industrial consumption (1965) is given in Table 4-2, showing sawnwood consumption as the most important in 1965. The upward trend in all sectors over the 1961-65 period is expected to continue. The general consumption pattern is expected to change through 1975 with a sharp increase in the relative importance of pulp products (to 30% of total consumption) offset by declining relative importance of sawlogs. The following recommendations follow from the study: (i) Industrial forests. - A programme of establishment of consolidated industrial forests should be initiated as a matter of urgency. (ii) Fuelwood forests - Properly sited, protected and managed fuelwood forest, worked on a 20-year rotation, should be established as a nation wide basis. (iii) Hardwood utilization - Detailed investigations are required into the use of indigenous hardwoods for the pulp, particle board and hardboard industries. (iv) Mining timber - Preservation treatment of all mining timber should be enforced by law. (v) Sawmills - Licencing restrictions should be enforced to reduce the number of small, inefficient sawmills. b. Extension work should be undertaken bv government to improve sawmilling practices.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.11
• /
• pp.1088-1095
• /
• 2009

In this paper, we describe the reorientation method of distorted road sign by using projection transformation for improving recognition rate of road sign. RSR (Road Sign Recognition) is one of the most important topics for implementing driver assistance in intelligent transportation systems using pattern recognition and vision technology. The RS (Road Sign) includes direction of road or place name, and intersection for obtaining the road information. We acquire input images from mounted camera on vehicle. However, the road signs are often appeared with rotation, skew, and distortion by perspective camera. In order to obtain the correct road sign overcoming these problems, projection transformation is used to transform from 4 points of image coordinate to 4 points of world coordinate. The 4 vertices points are obtained using the trajectory as the distance from the mass center to the boundary of the object. Then, the candidate areas of road sign are transformed from distorted image by using homography transformation matrix. Internal information of reoriented road signs is segmented with arrow and the corresponding indicated place name. Arrow area is the largest labeled one. Also, the number of group of place names equals to that of arrow heads. Characters of the road sign are segmented by using vertical and horizontal histograms, and each character is recognized by using SAD (Sum of Absolute Difference). From the experiments, the proposed method has shown the higher recognition results than the image without reorientation.

• Journal of the Korea Convergence Society
• /
• v.8 no.8
• /
• pp.77-82
• /
• 2017

In the splay manufacturing process, conveyor systems are widely used for conveying panels. In this conveyor, a large number of grounding lines are used in order to prevent a product failure due to static electricity. In many cases, the grounding line is disconnected due to the rotation of the transporting roller or curling, leading to product failure. In order to solve such a problem, there is a growing need for a system capable of detecting disconnection of a ground wire in real time. Therefore, in this paper, we propose a disconnection monitoring system of ESD (Electro-Static Discharge) ground wire caused by friction between the conveyor drive part and the panel. The proposed system is a monitoring system that can detect disconnection and disconnection of ground wire using ATmega 2560 and Wheatstone Bridge circuit. It can detect disconnection of ground wire immediately and can take measures to reduce the defect rate due to static electricity. The system proposed in this paper is expected to be applicable to the production and test equipments of all industries where the ground wire is used.