• Title/Summary/Keyword: rooting rate

Search Result 188, Processing Time 0.021 seconds

Effect of Growth Regulators, Genotypes and Cutting Position on Rooting and Root Growth of Chrysanthemum zawadskii H. (九折草 揷穗로부터 發根 및 根生長에 미치는 생장조절물질, 九折草 種 및 揷穗位置의 효과)

  • 김정률;유창연;조동하
    • Korean Journal of Plant Resources
    • /
    • v.11 no.3
    • /
    • pp.353-357
    • /
    • 1998
  • This study was conducted to determine the effect of growth regulators, genotype, and cutting position on the rooting and root growth from cutting of Chrysanthemum zawadskii H.. Rooting rate of Keungugeolcho in the treatement of IBA 500 and 1000 ppm was the better than those of other treatments of IAA, NAA and Rooton. Rooting rate differed depending on the genotype. Hangryobonggugeolcho was better than Keungucheolcho in rooting rate. The treatment of rooton remarkably induced many roots from the cuttings of eight accessions of Chrysanthemum zawadskii H.. Also, rooting rate and number of root differed depending on cutting position. When cuttings including shoot tip were cultured on tray containing bed soil, rooting rate and number of root induced from cuttings with shoot tip was higher than when cuttings without shoot tip and with lateral axillary bud were cultured.

  • PDF

Seed propagation and softwood cutting of native styrax japonicus for landscape tree uses (한국 자생 때죽나무의 조경수 이용을 위한 번식방법에 관한 연구)

  • 권오준;심경구;하유미
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.25 no.2
    • /
    • pp.9-19
    • /
    • 1997
  • These studies were carried out to investigate seed propagation method and conducted using stem cuttings of Styrax japonicus for using as a woody landscape plant. The results are obtained as follows. After the H\sub2\SO\sub 4\ and GA\sub 3\ treatment to the seeds of Styrax japonicus, three months of warm treatment followed by cold stratification for four months increased seed germination rate. The rooting rate of Styrax japonicus was increased by the treatment with concentrated IBA, especially highest at 7,000ppm. Rooting percentages were highest for cuttings taken on July 15, 1995. Therefore, the most effective method for rooting of Styrax japonicus was treatment with 7,000ppm IBA on July 15 cuttings, which showed rooting rate of over 90%. Half-leaf-remained cuttings were more effective than those with two leaves on rooting of Styrax japonicus. Dipping for 10 seconds in IBA solution resulted in rooting rate of over 70%. The longer the treatment time the worse the rooting.

  • PDF

Effect of Cutting Position, Media and Auxin on Rooting of Leaf Variegated Artemisia keiskeana Stem Cuttings (잎무늬종 맑은대쑥의 줄기삽목시 삽수부위, 용토 및 오옥신 처리가 발근에 미치는 영향)

  • Youn, Hee-Jung;Lee, Jong-Suk
    • FLOWER RESEARCH JOURNAL
    • /
    • v.18 no.1
    • /
    • pp.29-32
    • /
    • 2010
  • This study was conducted to determine the effects of cutting position, media, and auxin on rooting of Artemisia keiskeana cuttings. In the cutting positions, the cutting of middle and basal positions had a better growth in the both upper and lower part than the cutting of the top position. Especially, the cutting of the middle position showed the highest rooting rate, at 68.3%. In the media, peatmoss showed the latest date on the rooting initiation. Also, the growth, survival rate and rooting rate of the upper part and lower part were low. However, the cutting in vermiculate showed the fastest date on the rooting initiation, and had a significant effect on the growth of the upper part and lower part, showing the highest rooting rate and survival rate in all tested media. When cuttings were treated by auxin, the rooting rate and growth of cuttings were higher than the control. The control showed the lowest rooting rate, at 41%, while, the auxin treatment showed the highest, rate over 80%. Whereas when treated by NAA, the lower part of cuttings had a better growth than these treated by IBA. Also, the higher the concentration of auxin was, the higher the rooting rate and growth rate of Artemisia keiskeana cuttings were.

Effects of Cutting Condition on Rooting and Early Growth of a Rare Endemic Juniperus chinensis var. sargentii HENRY (삽목조건이 희귀수종 눈향나무의 발근과 초기생장에 미치는 영향)

  • Ahn, Sang-Yeol;An, Byung-Seop;Park, Soo-Jeong;Kim, Zhoo-Hyeon;Lee, Sang-Woo
    • Journal of agriculture & life science
    • /
    • v.45 no.4
    • /
    • pp.73-80
    • /
    • 2011
  • This study was conducted to elucidate the best cutting condition in propagation of Juniperus chinensis var. sargentii in respect of survival rate, rooting rate, and early growth after cutting via process of cutting time, cutting media, cutting type and growth regulators. As for cutting time, rooting rate was 68.3% on April, which was higher than 39.5% on May and 32.5% on June. The best cutting media was stream sand of rooting rate 72.7%. Those of mixed soil and decomposition were 40.1% and 27.5% each. The effect of growth regulators was different according to the kind of cutting media. There was no effect on stream sand media which showed the highest rooting rate, while it was very effective on the media of decomposition of granite, which rooting rate showed the lowest. Hardwood as cutting materials showed somewhat higher survival and rooting rate compared to semi-hardwood. The cutting with hardwood condition to stream sand on April, it is regarded to be the most effective condition for Juniperus chinensis var. sargentii to increase survival and rooting rate. Therefore in this experiment it is considered that the best season cutting is April, and the most useful media and plant materials stream sand, and hardwood respectively.

Promotion of Rootability of the Cuttings of Dendropanax morbifera Lev (황칠나무의 揷木發根力 增進)

  • 김세현
    • Korean Journal of Plant Resources
    • /
    • v.11 no.2
    • /
    • pp.157-162
    • /
    • 1998
  • This study was conducted to examine the effects of media, crown position, clone ,a nd plant growth substances upon the rootability of cuttings for the establishment of the method of mass production by cutting of Dendropanax morbifera Lev. the artifical soil mixtureof vermiculite, perlite and peatmoss (1 : 1 : 1 v/v/v) with IBA 100mg /l treatment was most effective on the rooting rate (85%) was obtained with semihardwood cuttings, which were collected early-August after the first growing seasons. The effect of crown position on rooting of cuttings were obsreved. Average percentage rooting of cuttings on crown position showed 78% , 72% and 65% in middle , upper and lower part with IBA 100mg/l treatment , respectively. Among the four treatment levels of IBA, the highest rooting rate was observed in 100mg/l IBA treatment.

  • PDF

Effects of Rare-earth Fertilizer on the Shoot Cuttings' Rooting of Vitex rotundifolia L. and Tamarix chinensis Lour. (희토광물계 비료가 순비기나무와 위성류의 삽목 발근에 미치는 영향)

  • Park, Chong Min;Jang, Kyu Kwan
    • Korean Journal of Environment and Ecology
    • /
    • v.29 no.6
    • /
    • pp.842-849
    • /
    • 2015
  • This study investigated the effects of rare-earth fertilizer on the shoot cuttings' rooting of Vitex rotundifolia L. and Tamarix chinensis Lour. The shoot cutting test was carried in 2008 and the main results are summarized as follows. The rate of rooting and the average roots increased in both number and length when rare-earth fertilizer is treated in V. rotundifolia and T. chinensis in comparison to those of the untreated control plot. In particular, when rare-earth fertilizer is diluted with water 1/2500, the rooting outstandingly increases. This result is almost similar to the effect of the rooting stimulant, IAA. Although there is no differentiation in its rooting rate according to the density, the rooting of T. chinensis shows a 100 percent effect on in the entire treated plot but not in the untreated control plot, so it is usable as a rooting stimulant. As for shoot cuttings' rooting, depending on the time immersed in diluted solution of rare-earth fertilizer, both V. rotundifolia and T. chinensis showed relatively higher percentages in all treatment plot immersed for 60 minutes than for 10 minutes. In conclusion, considering the results of the rooting percentage and the average number and length of roots of V. rotundifolia and T. chinensis, the shoot cuttings' rooting appeared higher in percentage when they were immersed in the rooting stimulant for sixty minutes with a lower density than 1/2500. This result shows that rare-earth fertilizer can be utilized as an alterative for IAA rooting stimulants currently available in the market.

Propagation Characteristics of Rare Plants Diabelia spathulata (Siebold & Zucc.) Landrein Applied by Seeding and Cutting Methods (종자파종과 삽목을 활용한 희귀식물 주걱댕강나무의 증식 특성)

  • Jeong Gul Jang;Myung Hoon Yi
    • Korean Journal of Plant Resources
    • /
    • v.36 no.4
    • /
    • pp.390-401
    • /
    • 2023
  • The purpose of this study was to identify the propagation characteristics of Diabelia spathulata (Siebold & Zucc.) Landrein through seeding and cutting methods. The seed germination rate was meager (0.22~3.56%). In hardwood cutting, the highest rooting rate was 36.1% in sand + perlite (2:1) and 37.8% in 1000 PPM of IBA pre-treatment. Softwood cutting showed the highest rooting rate when the cutting diameter was 3 to 5 mm and the cutting length was 7 to 8 cm. In particular, the highest rooting rate of 80% was observed in the sand among the 8 cultivation media treatments. In the case of root cuttings, the rooting rate was 83.3~96.7% in all cultivation media. The highest rooting rate was observed when the diameter of the cutting was 7 to 8 mm, and the length of the cutting was about 10 to 11 cm. Among cutting methods, root cutting showed the highest rooting rate. Division showed a 100% rooting rate regardless of size or growth status. For Diabelia spathulata (Siebold & Zucc.) Landrein, propagation by cuttings was more efficient than seeding. However, Further research on the morphophysiological dormancy and dormancy break of seeds is needed for seed propagation.

Propagation of a New Anticancer Plant, Cephalotaxus koreana, by Cutting (신규 항암소재의 개비자나무의 삽목증식)

  • Jung, Myung-Suk;Hyun, Jung-Oh;Lee, Uk;Fadly Yahya, Andi;Baik, Eul-Sun
    • Journal of Korean Society of Forest Science
    • /
    • v.98 no.4
    • /
    • pp.491-495
    • /
    • 2009
  • This study was conducted to investigate the propagation characteristics of Cephalotaxus koreana by cutting, whose plant has been known to new anticancer treatments. The treatments of plant growth regulators, cutting media temperature and growing media were investigated to know the rooting ability of cuttings. For rooting formation affected by plant growth regulators and its concentration, The application of IBA 100 mg/L was most effective in all of the characteristics including rooting rate of 88.5%. The optimum media temperature by cutting was $24^{\circ}C$ (treatment IBA 100 mg/L, rooting rate 84.6%), predicting that greenwood cutting from June to July is most effective. VPPL (vermiculite+peatmoss+perlite 1:1:1(v/v/v)) showed the highest value in all of the characteristics including rooting rate of 68.5% for the effect of growing media on rooting formation.

Effect of Rooting Media on Rooting and Root Growth of Rose Cuttings (장미의 삽목발근에 미치는 삽목용토의 영향)

  • Choi, Byeong-Jin;Sang, Chae-Kyu;Choi, Eun-Joo;Noh, Seol-A
    • Horticultural Science & Technology
    • /
    • v.18 no.6
    • /
    • pp.819-822
    • /
    • 2000
  • This study was conducted to determine the optimum rooting media composition for the production of high-quality rose cuttings. The percentage of rooting was highest in peatmoss (P) and coarse vermiculite (CV) mixture (1:2, v/v). In 'Little Mable' and 'Suplesse', the rate was above 95%, and 'Red Velvet', 'Noblesse', 'Rote Rose', and 'Sweetness' showed 100% rooting rate. 'Rote Rose' showed lowest rooting rate, but in the composition, the rate was 100%. In the composition, root growth was accelerated. Root number, root weight, and root diameter increased in P:CV (1:2) mixture. However, root length increased in peatmoss and perlite mixture (1:2). This results might be caused by the water holding capacity and porosity of the rooting media composition.

  • PDF

The Effect of Cutting Positions and Temperature on the Rooting of Bitter Gourd (여주 삽목 시 삽수절단 위치와 온도조건이 발근에 미치는 영향)

  • Lee, Hee Ju;Lee, Sang Gyu;Kim, Sung Kyeom;Choi, Chang Sun;Kim, Sang Beom
    • Journal of Bio-Environment Control
    • /
    • v.25 no.3
    • /
    • pp.162-167
    • /
    • 2016
  • This study was carried out to investigate proper stem cutting position and air temperature to regenerate roots from cuttings of bitter gourd. 'NS454' (NS) and 'Dragon' (DR) cultivars were tested and the cutting position was cut at the 3rd node in the stem (treatment I) and cut at the central part (stem segment) between 3rd leaf and 4th leaf in the stem (treatment II). The air temperature was maintained at 18, 23, 28 and $35^{\circ}C$ in the growth chambers, respectively. The photosynthetic photon flux at the ground of a chamber was maintained in approximately $150-200{\mu}mol\;m^{-2}s^{-1}$ during the 16-hour photoperiod. The relative humidity in the chambers was maintained over 85%. After 10 days of cuttings, regardless of cutting position, DR and NS cultivars showed 100% the survival rate in the $18^{\circ}C$ or $23^{\circ}C$ treatments, however, most of plants $18^{\circ}C$ treatment had not rooting. In the $28^{\circ}C$ treatment, regardless of cutting position, DR and NS cultivars showed 100% of the rooting rate. In the $23^{\circ}C$ treatment, for DR cultivar, the node cutting showed 90% of rooting rate and the stem segment cutting showed 40% rooting rate. For NS cultivar, the node cutting showed 50% of rooting rate and the stem segment cutting showed 40% rooting rate. DR and NS cultivars have high rooting rate, while the rooting rate remarkably decreased in the $35^{\circ}C$ treatment. For DR cultivar, the stem segment cutting showed 5.3 of the highest rooting number and the node cutting showed 2.7 rooting number in the $28^{\circ}C$ treatment. NS cultivar was not significantly different the rooting regardless of cutting position. The results suggested that cutting at the stem segment cutting of bitter gourd is an effective cutting method for increasing survival rate and the air temperature should be maintained at $28^{\circ}C$.