• Journal of Korean Society of Forest Science
• /
• v.76 no.4
• /
• pp.317-329
• /
• 1987

A comparative anatomy between the secondary xylem in the root and the stem of some Korean Lauraceae, including 6 genera and 7 species, was carried out in this study. The results are as follows; diameter and length of vessel element and fiber are wider and longer in the root than the stem. The angle of end wall of vessel element is more inclined in the root than the stem. Also more number of bar on the perforation plate of vessel element in root wood is found. From the anatomical characters of root and stem wood in some Lauraceous species, it is suggested that the wood of the root is phylogenetically mote primitive than that of the stem, except the diameter of vessel element.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.1
• /
• pp.31-46
• /
• 2024

Subterranean termite attacks on cajuput (Melaleuca cajuputi) seedling roots were widespread in several of Java's Perum Perhutani Forest Management Units. This attack was suspected to be related to the chemical components of the cajunput seedling roots. This study was conducted to determine the bioactivity of cajuput seedling root extract as an attractant for the subterranean termite Coptotermes curvignathus Holmgren (Isoptera: Rhinotermitidae). The extraction process was performed according to ASTM D1108-96, and the extract was characterized using gas chromatography-mass spectrometry (GC-MS). Bioactivity testing of the extracts was carried out using attractiveness and no-choice feeding bioassays. The results showed that the average root extraction yield from cajunput seedlings was 4.94%. The attractiveness of the extract solutions at concentrations of 0.50%, 0.75%, and 1.00% were 45.33%, 62.00%, and 74.67%, respectively. The mortality rate of C. curvignathus termites ranged from 9.63% to 24.44%. Cajuput seedling root extract's lethal concentration 50 was 2.45% (non-toxic). GC-MS analysis showed that the extract contained linoleic acid, which has the potential to attract insects.

• Proceedings of the Microbiological Society of Korea Conference
• /
• 2006.05a
• /
• pp.119-123
• /
• 2006

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.3
• /
• pp.27-34
• /
• 1991

Screw withdrawal test was carried out on the face and edge of domestic particleboard and medium density fiberboard in order to evaluate optimum pilot hole diameter. The obtained results were as follows: 1. Maximum withdrawal strengths on the face and edge of particleboard were obtained with pilot hole diameters at about 50% of root diameters of screw. 2. Maximum withdrawal strength on the face and edge of medium density fiberboard were obtained with pilot hole diameters that were about 60% and 50% of root diameters of screw, respectively. 3. Withdrawal strength showed about 91% of maximum withdrawal strength when pilot holes were not pre bored at particleboard. but when pilot holes at 90% of root diameter of screw withdrawal strength showed about as 51.3% of maximum withdrawal strength. 4. Withdrawal strength showed about 88% of maximum strength when pilot holes were not used, but withdrawal strength indicated 55.4% of maximum strength in case of 90% of root diameters of screw. 5. Maximum withdrawal strength on the face of particleboard was about 70.5% higher than that of the edge, and however medium density fiberboard was about 19.6% higher than that of the edge.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.3 s.116
• /
• pp.79-90
• /
• 2006

Tamarix chinenis blooms twice a you and its flowers, branches and leaves make the adjustment of tree shape. Propagation methods and growth characteristics of T. chinensis were studied in order to ascertain its potential use as one of vegetation resources for coast forestation and landscaping. The study results indicated that 1 or 2 you old hard wood cuttings showed higher rooting ratio than greenwood or semi hard wood cuttings. One to one mixture between vermiculite and pearlite appeared to be the best for bed soil, and sea sand and silt(loess) mixture was the next. Sea sand and granitic soil followed after. In terms of seasonal differences, spring cuttings showed the best rooting ratio, root number, and root length. Fall cuttings followed after spring cutting, and summer cuttings showed worst results regarding rooting ratio, root number, and root length. The best rooting promotion effects of growth regulators were observed with sea sand bed soils. There was no significant difference among growth regulators in terms of rooting and shoot growth. Low concentration below 100 ppm of growth regulators was enough for rooting promotion effect. In general, the number and mean length of roots and shoots were showed the excellent records in the sites with high rooting ratio. The study result strongly showed that T. chinensis can be considered as a suitable tree for coast forestation and landscaping because of its easy cutting propagation and rapid growth on saline lands.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.5
• /
• pp.352-362
• /
• 2012

Mass transfer behavior in wood was estimated through its microscopic structure. The diffusion coefficients which were decided by theoretical equations are influenced by different anatomical properties of wood. From the experiment, the moisture flux was linear to the square root of time. The diffusion coefficients had a regular tendency during the time elapse. During the modeling, it is necessary to understand the limitation of parameters and consider the particular situation to be simulated. In hardwood, because the apertures were not considered, tangential mass transfer simulation was totally different from experiment. As a result, a hardwood model design should consider the apertures which are even on the fiber walls.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.3
• /
• pp.128-136
• /
• 2011

In order to investigate the relationship between the prices of wood chips and pulps, regression analysis and cointegration test were conducted. Test results indicated that pulp producers adjusted pulp price in response to the change in wood-chip price and there were a long-run relationship between these prices. This implied that by raising the selling price of pulp, pulp producers avoid profit loss incurred by the increase in the wood-chip price. The existence of cointegration between wood chips and pulp prices implied that pulp producers were competing when they set the selling price of pulp.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.2
• /
• pp.172-178
• /
• 2011

Three different finger-jointed lumbers which have different geometric features and adhesives were manufactured and studied in this study. Larch and pitch pine lumbers with and without preservative treatment were used. Bending MOE was measured as the preliminary investigation for grouping the specimen. After the finger, bending MOE of two wood species without preservative treatment shows over 97% property of the control group. The tensile modulus also shows almost same property after the finger joint. And it is found out that the preservative treatment induce little effect on bending and tensile MOE. Based on this result, high performance of examined finger-jointed lumber can be found out. However, tensile strength decreased around 20% which would be induced by the crack along the root of the finger which is formed near the edge during manufacturing stage. And finger-jointed lumber with preservative treatment even shows higher decrement of the tensile strength with higher wooden part failure mode.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.1
• /
• pp.31-45
• /
• 2022

After manufacturing the natural dyed actual size Hanji using 11 kinds of plant natural dyeing materials and 2 kinds of animal natural dyeing materials, the color characteristics and color change and color fastness after post-mordanting were compared and discussed. The hues of 13 types of natural dyed Hanji were black, PB, and RP, each with 1 type, YP with 3 types, and Y with 7 types. Among the natural dyeing materials, Chinese ink, indigo and Lac showed high color yield and color difference, and violet-root cromwell and gardenia seeds showed low color yield. The color fastness of Hanji dyed with turpentine diluted Ottchil, Pagoda tree seeds, Chinese ink and indigo was excellent, while that of gardenia seeds and violet-root cromwell were very poor. After post-mordanting of natural dyed Hanji with Al, Cu, and Fe mordants, the hue changes were show up the Alnus firma, clove, lac and cochineal. In addition, the color difference was very diverse and was overall the most biggest due to Fe mordant. After 72 hr. of UV irradiation on post-mordanting natural dyed Hanji, hue change was observed in 3 types and color fastness was improved in 8 types by post-mordanting. The Hue and color fastness are significantly different depending on the type of natural dying materials and post-mordants. Therefore, when dyeing Hanji with natural dyes, it is necessary to dye with sufficient knowledges and informations about the desired color and fastness.

• Journal of Forest and Environmental Science
• /
• v.38 no.4
• /
• pp.249-255
• /
• 2022

The study was conducted to establish a method for the proliferation of hybrid poplar (P. alba × P. glandulosa) clone Bongwha1, an excellent biomass species. It was found that to collect the cuttings of Bonghwa1, it was necessary to use the main stem rather than the axillary branch. Stem growth by green-wood cuttings showed a tendency to decrease as the length of the collected cuttings increased, but the survival rate was low. Therefore, modified leafy stem cutting was attempted to increase the survival rate of the cuttings. In the modified leafy stem cutting method, 4 leaves were included in the cuttings, and especially, cuttings were performed using cuttings containing 2-4 cm xylem parts. Leafy stem cutting increased root growth and the number of stems, as well as the survival rate of hybrid poplar clone Bongwha1 compared to green-wood cuttings. The root growth of the leafy stem cutting poplar was better as there was more xylem part. Using two-year-old nursery stocks, the leafy stem cutting was used to produce about 66 cuttings. This study is expected to contribute to the mass propagation of high-quality nursery stocks.