• 대한한의진단학회지
• /
• 제16권3호
• /
• pp.41-48
• /
• 2012

Objectives: The aims of this study are to design a optimized mechanical structure of digital tongue imaging system (DTIS) equipped with LEDs in aspects of object distance and camera angle of coverage. Methods and Results: We tried to find optimized object distance while recording a rectangular object of common tongue size. In case object distance is 22 cm or less, edge of the rectangle was not taken beyond the shooting range. In contrast, if object distance is 40 cm or more, the rectangle image was too small. Therefore when considering the variation of subjects, we selected distance of 35-40 cm as appropriate object distance for the DTIS. We also tried to find optimized angle between camera view axis and horizontal line. We photographed from the side of the face of 7 adults with exposed tongue. We drew an exposed tongue lines to connect the tongue tip points and the tongue root points by using the photos acquired from the side faces. And then we calculated the tongue exposure angles between the vertical line and the exposed tongue lines. Mean tongue exposure angle was $28.3^{\circ}$ when tongue was lightly exposed and $13.3^{\circ}$ when maximally. So we determined $73^{\circ}$ as appropriate slope angle of part in contact with face of the DTIS and by considering that the standard variation was great, we designed control gears to adjust the slope of the camera view axis and to regulate the object distance. Conclusions: We designed a optimized mechanical structure in object distance and slope angle of part in contact with face of the DTIS.

• 동의생리병리학회지
• /
• 제31권5호
• /
• pp.255-263
• /
• 2017

This article is for understanding relations between the classifications of gastritis and syndrome differentiation types of Korean Medicine through research on syndrome differentiations of clinically applied gastritis and literature of Korean Medicine. Clinical papers were searched in China Academic Journals(CAJ) of China National Knowledge Infrastructure(CNKI) from 1995 to 2015. Conclusions are as follows. First, disease mechanism of chronic gastritis are qi stagnation, damp stagnation, heat obstruction, blood stasis obstruction, yin damage, damage to collaterals with healthy qi deficiency and pathogenic qi. And qi movement stagnation is shown through the status of chronic gastritis. Second, chronic superficial gastritis belongs to qi aspect syndrome and mainly pathogen excess syndrome. And the key mechanisms are congestion and disharmony of stomach qi sometimes combined with liver depression, food accumulation and dampness-heat. Third, chronic atrophic gastritis belongs to qi-blood syndrome and deficiency-excess complex syndrome with the root of spleen qi deficiency and stomach yin deficiency and the tip of blood stasis, qi stagnation. And key mechanism is damage to collaterals with healthy qi deficiency and toxin-blood stasis. Forth, pathogen excess syndromes are shown at the early stage of chronic gastritis and healthy qi deficiency syndromes after the middle stage. Qi deficiency is shown at the beginning of the disease and yin deficiency at the late stage. And qi deficiency is related with superficial gastritis and yin deficiency with atrophic gastritis.

• 항공우주시스템공학회지
• /
• 제11권4호
• /
• pp.36-43
• /
• 2017

쿼드틸트 무인기에 적용되는 프롭로터 블레이드 형상 최적설계를 수행하였다. 형상 최적설계 프로세스 통합은 ModelCenter(R) 프로그램을 이용하였으며, 최적설계 과정에서 성능해석은 CAMRAD-II를 사용하였다. 목적함수는 제자리비행 및 전진비행 모드에서 성능효율 최대화로 설정하였으며, 제한조건은 소요 동력 및 피치로드 하중 값이 기본 형상 값보다 작게 되도록 설정하였다. 설계변수로는 블레이드 루트 코드길이, 테이퍼비, 비틀림 각의 기울기 및 각도, 하반각, 끝단 형상 생성을 위한 파라볼릭 계수, 하반각과 끝단형상이 적용되는 블레이드 스팬위치, 블레이드 단면을 구성하는 익형의 위치로 구성하였다. 최적 설계 결과 기준 형상 대비 제자리비행 효율은 1.6%, 전진 비행 효율은 13.6% 향상된 프롭로터 블레이드 형상을 도출할 수 있었으며, 피치로드 하중은 약 30% 감소하였다.

• Journal of Plant Biotechnology
• /
• 제49권2호
• /
• pp.124-130
• /
• 2022

The application of traditional taro propagation methods for large-scale cultivation would be insufficient to meet the high demand for quality planting materials. Therefore, this study aimed to develop an in vitro micro-propagation technique for two local taro cultivars (cv.), Wangi and Putih. Taro cormels were collected from the Malaysian Agricultural Research and Development Institute (MARDI) germplasm (Serdang, Malaysia). Explants were taken from the shoot tip of cormels and initially cultured on Murashige and Skoog (MS) basal media for four weeks. The explants were then transferred to different multiplication media supplemented with different types and concentrations of cytokinins such as 6-benzylaminopurine (BAP ) and Thidiazuron (TDZ). Shoot production was quantified after six weeks of culture. The highest mean number of new shoots was produced by the Wangi cultivar on MS medium supplemented with 2.0 mg/l BAP (2.10 shoots), MS medium supplemented with 0.5 mg/l TDZ (2.18 shoots), and Gamborg B5 medium supplemented with 6.0 mg/l BAP (2.43 shoots). The maximum average number of the Putih cultivar shoots was obtained on MS supplemented with 2.0 mg/l BAP (3.57 shoots). MS basal media was used for root initiation, as it produced an average of 25 roots with an 11-cm length. Various types of substrate mixtures were used during acclimatization. The best acclimatization substrate for the Wangi cultivar was 100% peat soil, whereas the Putih cultivar grew optimally in a combination of peat and perlites at a 1:1 ratio. Taro plantlets require approximately 4 to 6 weeks to acclimatize before they can be transferred to the field.

• 한국분무공학회지
• /
• 제27권2호
• /
• pp.57-65
• /
• 2022

The purpose of this study is to use machine learning to build a model capable of predicting the flash boiling spray characteristics. In this study, the flash boiling spray was visualized using Shadowgraph visualization technology, and then the spray image was processed with MATLAB to obtain quantitative data of spray characteristics. The experimental conditions were used as input, and the spray characteristics were used as output to train the machine learning model. For the machine learning model, the XGB (extreme gradient boosting) algorithm was used. Finally, the performance of machine learning model was evaluated using R² and RMSE (root mean square error). In order to have enough data to train the machine learning model, this study used 12 injectors with different design parameters, and set various fuel temperatures and ambient pressures, resulting in about 12,000 data. By comparing the performance of the model with different amounts of training data, it was found that the number of training data must reach at least 7,000 before the model can show optimal performance. The model showed different prediction performances for different spray characteristics. Compared with the upstream spray angle and the downstream spray angle, the model had the best prediction performance for the spray tip penetration. In addition, the prediction performance of the model showed a relatively poor trend in the initial stage of injection and the final stage of injection. The model performance is expired to be further enhanced by optimizing the hyper-parameters input into the model.

• Journal of the Korean Wood Science and Technology
• /
• 제32권6호
• /
• pp.57-66
• /
• 2004

To study the efficient usage of small diameter logs and woods containing defects such as knots, slope of the grain and decay, six types of finger-jointed woods with various finger profiles were made of poplar, pine and oak with different density. We investigated the effect of finger profile on static bending strength performances of finger-jointed woods. The efficiency of bending MOE, MOR and deflection showed the highest value in poplar finger-jointed wood with the lowest density of three species, and the lowest value in oak finger-jointed wood with the highest density of three species. The values markedly decreased with increasing finger pitch for finger-jointed wood glued with polyvinyl acetate (PVAc) resin for all tested species, whereas for the finger-jointed wood glued with resorcinol-phenol formaldehyde (RPF) resin, the influence of finger pitch on the efficiency of MOE was not found in all tested species, and those on the efficiency of MOR and deflection indicated the same trend as finger-jointed wood glued with PVAc resin in the case of pine and oak finger-jointed wood with higher densities. It was found that the values tended to decrease with increasing density of species on the whole and the desirable finger pitches were L (6.8 mm) for poplar, M (4.4 mm) for pine and S (3.5 mm) for oak in a view of economy. For finger-jointed wood glued with PVAc resin, the fitness between a tip and a root width of a pair of fingers δ of 0.5 mm indicated the highest efficiency of MOE for all species. And, the influence of δ on MOR was only found in oak finger-jointed wood glued with RPF resin and the desirable δ value for oak was 0.1 mm. However, it was found that the influence of δ on the strength performance was very small.

• Journal of the Korean Wood Science and Technology
• /
• 제31권2호
• /
• pp.84-91
• /
• 2003

본 연구에서는 3 수종(이태리 포플러, 소나무, 굴참나무재)을 공차별(0, 0.15, 0.3, 0.45 mm)로 초산비닐 수지와 레소시놀-페놀 공축합 수지를 이용하여 접합 제작하였다. 휨시험에서 핑거공차에 따라서 검출되는 AE와 휨강도성능 특성을 살펴본 결과는 다음과 같았다. 레소시놀재의 AE파 발생시기가 초산재보다 빨랐으며, 레소시놀재의 AE파 사상총수는 하중의 증가와 함께 계속적으로 증가하였으며 총발생 사상총수도 초산재보다 휠씬 많이 나타났다. 또한, 레소시놀재의 AE파 사상총수는 낮은 하중에서도 많은 개수가 발생하였다. 비례한도 내에서도 레소시놀 접착제를 사용한 경우에는 많은 AE파가 검출되었다. 따라서 레소시놀 접착제로 접착한 핑거 접합재의 휨시험으로부터 얻은 AE 신호는 핑거공차에 따른 접합재의 강도 예측이나 보증에 이용 가능할 것으로 판단되었다.

• 대순사상과 동아시아종교
• /
• 제3권2호
• /
• pp.13-34
• /
• 2024

This article is a compilation of civilizational crises and their overcoming from the worldview of Daesoon Jinrihoe, based on the premise that religion can offer advice on the crises faced by modern civilization. It is a reinterpretation of human history from a religious perspective, focusing on mutual contentions, grievances, grudges, and their overcoming. Daesoon Jinrihoe explains that modern civilizational crises were first recognized by divine beings in the 18th and 19th centuries, and then later recognized by humans in the 20th and 21st centuries. Unable to resolve the civilization crises, the divine beings asked the Supreme God to intervene in human history, and the Supreme God was born in a human body to reveal the root causes and development of various civilizational crise sand to propose solutions to overcome them. These solutions encompass setting the world aright and ushering in a new era through the Reordering Works of Heaven and Earth (天地公事), attaining enduring peace by practicing grievance resolution for mutual beneficence (解冤相生), and reconstructing the relationship between divine beings and humans in harmonious coexistence. Devotees hold that Daesoon Jinrihoe is a religion that originated as a solution to a problem faced by God rather than humankind. As such, it considers the crises of civilization and their overcoming as the reason for existence. According to the religion's worldview, the Supreme God has already provided the solution to these civilizational crises. With a tip of the hat to the film Interstellar (2014), it could be said, "God Found a Way. He Always Has." Now, Daesoon Jinrihoe posits that it is up to humans to implement the way that God found.

• Journal of Plant Biotechnology
• /
• 제50권
• /
• pp.82-88
• /
• 2023

순도가 균일한 원종을 대량생산하기 위해 원원종 종자를 이용하여 조직배양 기술 중 경정배양을 이용하였다. 실험 재료로는 원원종 계통 RA2와 RA4 계통을 사용하였다. BA 호르몬 사용의 경우 RA2 계통의 유묘에서는 BA 1.33 uM 첨가 배지에서 평균 14.67개로, 성묘의 경우 BA 1.78 uM 첨가 배지에서 평균 11.33개로 가장 많은 개수의 multi-shoots이 형성되었으며, RA4 계통 경우 유묘에서는 BA 2.22 uM 첨가 배지에서 평균 11.67개로, 성묘에서는 BA 1.33 uM 첨가 배지에서 평균 13.67개로 가장 많은 multi-shoots이 형성되었지만 BA 농도별로 유의수준에서 거의 차이가 없는 것으로 나타났다. TDZ 호르몬 사용의 경우 RA2 계통은 TDZ 농도가 증가할수록 multi-shoots의 수가 증가하여 TDZ 0.45 uM 첨가 배지에서 가장 많은 multi-shoots가 형성되었으나(유묘 7.0개, 성묘 3.0개), TDZ 2.25 uM 부터는 거의 multi-shoots가 형성되지 않았다. RA4 계통은 유묘의 경우 거의 multi-shoots이 생성되지 않았고 성묘의 경우 TDZ 0.23, 0.45 uM 첨가 배지에서 3.7개의 multi-shoots이 생성되었으나 그 이상의 농도에서는 유묘에서와 같이 생성되지 않았다. 생성된 multi-shoots를 계대배양하여 생장한 조직배양묘를 SSR marker를 사용하여 원종계통과 비교분석한 결과 생성된 조직배양묘에서 변이의 양상이 약하게 보인 것이 있었으나 돌연변이체로 나타난 것은 없었다. 또한 뿌리 발근에 있어서는 RA2, RA4 계통 모두 대체적으로 IBA 4.9 uM 첨가된 배지에서 발근율, 뿌리 수, 뿌리발달 정도 등이 가장 좋았다.

• 한국자원식물학회지
• /
• 제32권1호
• /
• pp.53-62
• /
• 2019

본 연구는 우리나라에 자생하고 있는 비비추속 식물 6종(일월비비추, 주걱비비추, 다도해비비추, 좀비비추, 한라비비추, 흑산도비비추)의 정단을 이용하여 대량증식과 품종개발 등을 위한 기내증식체계를 확립하고자 하였다. 정단은 0.5, 1.0, 2.0, 4.0 mg/L BA와 0.1, 0.5, 1.0, 2.0 mg/L TDZ를 0.1 mg/L NAA와 각각 혼용한 조건과 PGRs을 무첨가한 조건(control)의 MS배지에 배양하였다. 배양 8주 후에 embryogenic callus, somatic embryo, crown bud, 그리고 신초와 뿌리의 분화 및 생육, 생체중 등에 대하여 조사하였다. 6종의 비비추 식물 모두에서 control에 비하여 PGRs 처리구의 embryogenic callus와 somatic embryo 형성율, 다신초 분화율이 높았다. 분화된 신초의 개수는 일월비비추는 2.0 mg/L TDZ에서 5.4개, 주걱비비추와 다도해비비추는 1.0 mg/L TDZ에서 각각 3.3개, 5.8개, 좀비비추는 0.5mg/L BA에서 11.1개, 흑산도비비추는 0.5 mg/L TDZ에서 9.8개, 한라비비추는 1.0 mg/L BA, 0.1 mg/L TDZ에서 8.1개로 가장 많았다. Somatic embryo 형성에서는 다도해비비추와 흑산도비비추가 처리한 PGRs에 대해 효과적이었고, 일월비비추, 주걱비비추, 좀비비추, 한라비비추에서는 상대적으로 효과가 적었다. 4종의 자생 비비추(일월비비추, 주걱비비추, 다도해비비추, 흑산도비비추)에서 조사된 crown bud도 control에 비하여 PGRs 처리구에서 더많이 형성되었다. 주걱비비추는 cytokinin의 종류 및 농도와 상관없이 callus와 신초 분화에 큰 효과가 나타나지 않았지만, crown bud의 형성에는 TDZ에서 약간 증가하였다.