• Journal of Periodontal and Implant Science
• /
• v.34 no.3
• /
• pp.523-533
• /
• 2004

The purpose of this study was to evaluate the alveolar bone surface following root separation angle in the mandibular second molars. The fifty mandibular second molars(which were extracted) were selected, and the alveolar bone surface following root separation angle of the selected teeth were evaluated. The results were obtained as follows; 1. The root separation angle of fifty mandibular second molars were divided into three groups. The first $group(10-20^{\circ})$ was made up of ten teeth, the second $group(20-30^{\circ})$ was made up of fifteen teeth, and the third group(30-40$^{\circ}$) was made up of twenty-five teeth. 2. The mean root separation angle was $28.1^{\circ}$. The mean alveolar bone rate on the mesial surface of the mesial root was 44.27%, on the distal surface of the mesial root was 36.52%, on the mesial surface of the distal root was 33.45%, and on the distal surface of the distal root was 25.28%. 3. The mean alveolar bone rate on the distal surface of the mesial root, which composed the root separation area, was 32.95% in the first group, 36.06% in the second group, and 38.22% in the third group. The mean alveolar bone rate in the mesial surface of the distal root was 31.40% in the first group, 31.93% in the second group, and 35.18% in the third group. 4. The positive correlation was found between the root separation angle and the alveolar bone rate in the root separation area.(P<0.05) Although the mandibular second molar is a very important tooth in the oral cavity, its treatment and diagnosis is very difficult due to the variation of its root form. When periodontal disease involves the mandibular second molar, the result of this study assists in its treatment and diagnosis.

• Journal of Periodontal and Implant Science
• /
• v.25 no.3
• /
• pp.614-622
• /
• 1995

Root caries is very frequently developed on exposed root surface after periodontal surgical treatment. In order to determine the anti-caries effect of Nd : YAG laser irradiation on periodontally exposed root surface, 40 mandibular molar teeth that had been extracted due to excessive periodontal destruction were used as the experimental teeth. All teeth were treated by the same procedure as conventional periodontal root treatment, ie thorough scaling, root planing and root conditioning with tetracycline HCl(100mg/ml, 5min.). Within middle one third of root, mesial half surface(20) or distal half surface(20) was randomly irradiated at various power of 1.0W, 2.0W, 3.0W and 4.0W for 60 seconds by non-contact(5mm) delivery of a pulsed Nd : YAG laser(EN.EL.EN060, Italy). The microhardness was measured by Vikers microhardness tester(Wilson, USA) at 2mm/second of jog speed under 100gm load. The difference of microhardness between irradiated side and non-irradiated side was statistically analyzed ANOVA and Duncan's method. Following results were obtained ; 1. The microhardness(Knoop hardness number) was significantly higher in laser irradiated surface than non-irradiated surface(p<0.05). 2. There was no significant difference in microhardness between experimental groups classified by different laser power(p>0.1). The results suggest that Nd : YAG laser irradiation on exposed root suface after periodontal therapy may inhibit the root caries development by enhancing surface microhardness.

• Journal of Periodontal and Implant Science
• /
• v.25 no.1
• /
• pp.76-88
• /
• 1995

The purpose of this was to evaluate the in vitro effects of different application modes of tetracycline HCI on dentin root surfaces. The study group was comprised of 30 teeth with advanced periodontal disease extracted before the start of periodontal therapy. The diseased root surface was vigorously root planed to expose dentin. The teeth were sectioned and cotton pellets. soaked in a saturated solution of tetracycline HCI, were either "placed" or "burnished" on the prepared root surface for 3, 5 min. respectively. Control surfaces were similarly treated with root planing only. Following the various treatments, teeth were fixed. dehydrated, critical point dried, and coated for scanning electron microscopic(SEM) evaluation. The surfaces of tetracycline HCI treated specimens considerably differed from specimens treated with root planing only. Results demonstrated that root-planed, no-tetracycline HCI specimens had amorphous, irregular surface which corresponded to a smear layer. Tetracycline HCI specimens exhibited collagen fibers and dentinal tubules exposed by the removal of the smear layer. Although some differences were seen in surface structures among some specimens. "burnished" application causes more extensive change than "placed" application, and application time of the tetracycline HCl did not seem to have any major impact on the surface morphology.

• Imaging Science in Dentistry
• /
• v.47 no.2
• /
• pp.117-122
• /
• 2017

Purpose: The aim of this study was to compare the use of 3-dimensional (3D) laser scanning and cone-beam computed tomography (CBCT) as methods of root surface measurement. Materials and Methods: Thirty teeth (15 maxillary first premolars and 15 mandibular first premolars) from 8 patients who required extractions for orthodontic treatment were selected. Before extraction, pre-treatment CBCT images of all the patients were recorded. First, a CBCT image was imported into simulation software (Mimics version 15.01; Materialise, Leuven, Belgium) and the root surface area of each tooth was calculated using 3-Matic (version 7.01, Materialise, Leuven, Belgium). After extraction, all the teeth were scanned and the root surface area of each extracted tooth was calculated. The root surface areas calculated using these 2 measurement methods were analyzed using the paired t-test (P<.05). Correlations between the 2 methods were determined by calculating the Pearson correlation coefficient. The intraclass correlation coefficient(ICC) was used to assess intraobserver reliability. Results: The root surface area measurements ($230.11{\pm}41.97mm^2$) obtained using CBCT were slightly greater than those ($229.31{\pm}42.46mm^2$) obtained using 3D laser scanning, but not significantly (P=.425). A high Pearson correlation coefficient was found between the CBCT and the 3D laser scanner measurements. The intraobserver ICC was 1.000 for 3D laser scanning and 0.990 for CBCT. Conclusion: This study presents a novel CBCT approach for measuring the root surface area; this technique can be used for estimating the root surface area of non-extracted teeth.

• Journal of Periodontal and Implant Science
• /
• v.43 no.2
• /
• pp.101-105
• /
• 2013

Purpose: The present study aimed to measure root surface roughness in teeth with periodontitis by a profilometer following root planning with ultrasonic and hand instruments with and without erbium-doped yttrium aluminium garnet (Er:YAG) laser irradiation. Methods: Sixty single-rooted maxillary and mandibular teeth, extracted because of periodontal disease, were collected. The crowns and apices of the roots were cut off using a diamond bur and water coolant. The specimens were mounted in an acrylic resin block such that a plain root surface was accessible. After primary evaluation and setting a baseline, the samples were divided into 4 groups. In group 1, the samples were root planned using a manual curette. The group 2 samples were prepared with an ultrasonic scaler. In group 3, after scaling with hand instrumentation, the roots were treated with a Smart 1240D plus Er:YAG laser and in group 4, the roots were prepared with ultrasonic scaler and subsequently treated with an Er:YAG laser. Root surface roughness was then measured by a profilometer (MahrSurf M300+RD18C system) under controlled laboratory conditions at a temperature of $25^{\circ}C$ and 41% humidity. The data were analyzed statistically using analysis of variance and a t-test (P<0.05). Results: Significant differences were detected in terms of surface roughness and surface distortion before and after treatment. The average reduction of the surface roughness after treatment in groups 1, 2, 3, and 4 was 1.89, 1.88, 1.40, and 1.52, respectively. These findings revealed no significant differences among the four groups. Conclusions: An Er:YAG laser as an adjunct to traditional scaling and root planning reduces root surface roughness. However, the surface ultrastructure is more irregular than when using conventional methods.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.2
• /
• pp.375-387
• /
• 1995

The purpose of this study was to quantitatively evaluated experimental tooth root resorption for digital radiography. For this study, experimentally three root sites were used, and radiograms were taken with standardized apparatus. Digital imaging system were consisted of NEC PC-980l(computer), TRINITRON(monitor), SONY XC-711 CCD camera. The display monitor had a resolution of 512X512 pixels. The obtained results were as follows: 1. In the difference of the four X-ray film of the contrast correction, the contrast difference was one gray scale variation at mean value. 2. Viewing of the view box of the periapical radiographs, experimental tooth root resorption of the periapical area of the first premolar, middle of mesial surface of the first molar mesial root, middle of lingual surface of the first molar distal root were recognized by increased diameter. 3. On the analysis by histogram, the periapical area of the first premolar, the middle of mesial surface of the first molar mesial root were each recognized tooth root resorption of the 5,6,7 pixel, 2,4,5 pixel by increased diameter. 4. On the analysis by histogram, the middle of lingual surface of the first molar distal root was each recognized tooth root resorption of the none, 3,6 pixel by increased diameter.

• Journal of Periodontal and Implant Science
• /
• v.28 no.2
• /
• pp.351-372
• /
• 1998

The purpose of this study was to evaluate in vitro effects of the loss of tooth substance and root surface changes following root planing with various periodontal instruments. The 39 extracted human teeth due to severe periodontal disease were included. The total 50 root surfaces of 30 teeth were root planed with following instruments : Group 1, with Gracey curette, Group 2, with ultrasonic scaler, Group 3, with rotating root planing bur, Group 4, with Gracey curette plus rubber cup polishing, and Group 5, with ultrasonic scaler plus rubber cup polishing. Following root planing, the amount of tooth substance loss was evaluated by measuring the weight of the removed tooth substance and then 5 specimens ($5{\times}5{\times}2mm$) were randomly selected from the each group for roughness measurement. Root planed areas of each specimen were subjected to five measurements using the Profilometer and an average surface roughness values(Ra) for each group was obtained. Statistical difference for roughness values of each group was analyzed using oneway ANOVA and student t-test. For scanning electron microscopic(SEM) examination of root surface changes following root planing, 15 root surfaces of remaining 9 teeth were root planed and 3 specimens were randomly selected. The mean loss of tooth substance removed was Group 1, $7.0{\pm}1.09mg$, Group 2, $1.3{\pm}1.00mg$, Group 3, $5.8{\pm}1.72mg$, Group 4, $8.7{\pm}1.34mg$, and Group 5, $4.5{\pm}1.68mg$ following root palning, respectively. These results indicate that curette is effective instrument in the respect of diseased root substance removal. The average surface roughness values are following results : Group 1 and Group 4 were the smoothest surface ($Ra=0.34{\pm}0.06{\mu}m$, $Ra=0.34{\pm}0.04{\mu}m$, respectively) and Group 2 was the roughest surface ($Ra=2.09{\pm}0.06{\mu}m$). Statistical analysis of roughness values demonstrated a highly significant difference (P<0.05) between each experimental groups. However, no statistically significant difference in roughness values were observed between the Group 1 and Group 4. The results in this study suggest that curette and/or polishing procedure should be done after root planing with ultrasonic scaler and caution should be used with dia-mond-coated bur during routine root planing procedure.

• Imaging Science in Dentistry
• /
• v.47 no.4
• /
• pp.241-246
• /
• 2017

Purpose: The aim of this study was to compare the root surface areas of the maxillary permanent teeth in Thai patients exhibiting anterior normal overbite and in those exhibiting anterior open bite, using cone-beam computed tomography (CBCT). Materials and Methods: CBCT images of maxillary permanent teeth from 15 patients with anterior normal overbite and 18 patients with anterior open bite were selected. Three-dimensional tooth models were constructed using Mimics Research version 17.0. The cementoenamel junction was marked manually. The root surface area was calculated automatically by 3-Matic Research version 9.0. The root surface areas of each tooth type from both types of bite were compared using the independent t-test (P<.05). The intraclass correlation coefficient was used to assess intraobserver reliability. Results: The mean root surface areas of the maxillary central and lateral incisors in individuals with anterior open bite were significantly less than those in those with normal bite. The mean root surface area of the maxillary second premolar in individuals with anterior open bite was significantly greater than in those with normal bite. Conclusion: Anterior open-bite malocclusion might affect the root surface area, so orthodontic force magnitudes should be carefully determined.

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.1-14
• /
• 1994

Dental calculus which is calcifing and/or calcified dental plaque is divided into supragingival calculus and subgingival calculus according to the position of deposit to gingival margin. Subgingival calculus has more important clinical significance in diagnosis and treatment of periodontal disease than supragingival calculus. In order to investigate the deposition pattern of subgingival calculus on each root surface of different tooth type, extracted 192 teeth due to excessive destruction of periodontal tissue were divided according to tooth type and the deposition pattern of subgingival calculus was classified into linear type, veneer type, scattered type, and aggregated type according to the configuration and the extent of deposit. The difference of percentage between each deposition pattern was statistically analyzed by Chi-Square test. Following results were obtained : l. In maxillary incisors, linear type and aggregated type were predominant deposition pattern of subgingival calculus on labial(45.5%, 36.4%) and palatal(36.4%, 36.4%) root surface, aggreated type(72.7%) was on mesial surface, and aggregated type(54.5%) and scattered type(36.4%) was on distal suface. 2. In mandibular incisors, scattered type, linear type and aggregated type were predominant deposition pattern of subgingival calculus on labial(33.3%, 30.6%, 27.8%) and lingual(36.1%, 30.6%, 25.0%) root surface, aggregated type(33.3%), scattered type(27.8% ), and veneer type(27.8%) were on mesial surface, and aggregated type(38.9%) and scattered type(33.3%) on distal surface. 3. In maxillary peremolars, the predominant deposition patterns of subgingival calculus were linear type(28.6%) on buccal root suface, scattered type(35.7%) and linear type(28.6%) on palatal surface, scattered type(39.3%) on mesial surface, aggregated type(46.4%) on distal surface, and aggregated type(53.6%) on furcation area. 4. In mandibular premolars, scattered type was predominant deposition pattern of subgingival calculus on buccal(39.3%) and lingual(50.0%) root surface, scattered type(32.1%) and aggregated type(32.1% ) were on mesial surface, and aggregated type(42.9%) was on distal surface. 5. In maxillary molars, aggregated type(40.0%) and scattered type(32.5%) were predominat deposition pattern of subgingival calculus on buccal root surface, aggregated type was on distal(40.0%) and furcation area(50.0%), but there was no predominat pattern on palatal and mesial root surfaces. 6. In mandibular molars, aggregated type(39.5%) and scattered type(28.9%) were predominant deposition patterns of subgingival calculus on buccal root surface, aggregated type(36.8%) was on lingual surface, linear type(39.5%) and aggregated type(34.2%) were on furcation area, but there was no predominant pattern on mesial and distal root surfaces.

• Journal of Periodontal and Implant Science
• /
• v.26 no.3
• /
• pp.701-713
• /
• 1996

The purpose of this study was to evaluate the biocompatibility of the Nd:YAG lased root surface followed by root planing and/or tetracyline-HCI(T.C.-HCI) conditioning. $30,4mm{\times}4mm$ root segments were obtained from unerupted third molars and 21, periodontally involved root segments. The treatment groups were as follows : (1) healthy root cementum surface groups : 1) control(non-treated group), 2) lased only, 3) lased/root planed, and 4) lased/T.C.-HCI. (2) diseased root cementum surface groups : 1) control(root planed only), 2) lased/root planed, and 3) lased/root planed/T.C.-HCI. The specimens were treated with a Nd:YAG laser using a $320{\mu}m$ noncontact optic fiber handpiece with an energy setting of 1.5W($114.6J/cm^2$), 2.0W($152.9J/cm^2$), 5.0W($382J/cm^2$) for one minute. The fiber was held perpendicular to the petri dish(NUNC) 2cm apart in an attempt to expose the entire root segments equally. Human gingival fibroblasts were cultured from explants of normal interdental gingival tissue obtained during third morlar extraction. The attachment assay was performed with third-generation fibroblasts. The numbers of gingival fibroblasts attached to the root surface were counted on each specimen under the light microscope, and were statistically analyzed by the oneway ANOVA followed by Tukey's test in SPSS/PC+programs. The results were as follows : 1) In healthy root cementum surfaces, lased/root planed groups exhibited a significantly increased fibroblast attachment compared to controls, lased only, and lased/T.C.-HCI groups(p<0.05), 2) In diseased root cementum surfaces, laser treatment followed by root planing and/or T.C.HCl groups exhibited a increased tendency of fibroblast attachment compared to root planed only group. The results suggest that laser treatment followed by root planing and/or T.C.-HCl would appear necessary so as to render the root surface biocompatible.