Kim, Ji Hoon;Lee, Chul Woo;Chun, Kwon Soo;Shin, Won Han;Bae, Hack-Gun;Chang, Jae Chil
Journal of Korean Neurosurgical Society
/
v.52
no.4
/
pp.384-390
/
2012
Objective : The objective of this study was to investigate the morphologic characteristics between the vertebral body and the regions of the cervical and thoracic spinal cords where each rootlets branch out. Methods : Sixteen adult cadavers (12 males and 4 females) with a mean age of 57.9 (range of 33 to 70 years old) were used in this study. The anatomical relationship between the exit points of the nerve roots from the posterior root entry zone at each spinal cord segment and their corresponding relevant vertebral bodies were also analyzed. Results : Vertical span of the posterior root entry zone between the upper and lower rootlet originating from each spinal segment ranged from 10-12 mm. The lengths of the rootlets from their point of origin at the spinal cord to their entrance into the intervertebral foramen were 5.9 mm at the third cervical nerve root and increased to 14.5 mm at the eighth cervical nerve root. At the lower segments of the nerve roots (T3 to T12), the posterior root entry zone of the relevant nerve roots had a corresponding anatomical relationship with the vertebral body that is two segments above. The posterior root entry zones of the sixth (94%) and seventh (81%) cervical nerve roots were located at a vertebral body a segment above from relevant segment. Conclusion : Through these investigations, a more accurate diagnosis, the establishment of a better therapeutic plan, and a decrease in surgical complications can be expected when pathologic lesions occur in the spinal cord or vertebral body.
Currently electronic apex locators have been widely used to determine working length in endodontic treatment. According to Manufacture's recommendation, it is beneficial to find the working length before instrumenting the canal. However, in crown-down pressureless technique, working length of tooth is established following coronal instrumentation 3mm short of radiographic apex. In narrow canals, mechanically formed constriction might be established by coronal instrumentation in some distance from anatomical constriction. The purpose of this study was to evaluate the accuracy of Root-ZX in the canal with mechanical constriction following considerable coronal enlargement with ProFile .06 series. The 40 root canals in 30 extracted mandibular molars were accessed, and their actual length (AL) established by passing a size 10 file just through the minor apical foramen. The teeth were then embedded in an acrylic container with normal saline. The initial canal length(IL) was measured with Root-ZX by negotiating a size 10 file to the apical constriction. The canal was sequentially enlarged to size 40 with ProFile .06 file 3mm short of actual length. The enlarged final canal lengths (FL) were obtained with a size 15 file. The average values of IL, FL were calculated and compared using Repeated measures Analysis of Variance followed Turkey's Studentized Range test. The results were obtained as follows: 1. The initial canal length was 0.12mm shorter than actual canal length(P>0.05). 2. The differences between initial canal length and final canal length were not significant(P>0.05). 3. As a result of this study, regardless of mechanically formed constriction. Root-ZX differentiated between mechanical and anatomic constriction.
In this paper, a rule based Mamdani type fuzzy logic model for prediction of slippage at maximum tensile strength and slippage at rupture of structural lightweight concretes were discussed. In the model steel rebar diameters and development lengths were used as inputs. The FL model and experimental results, the coefficient of determination R2, the Root Mean Square Error were used as evaluation criteria for comparison. It was concluded that FL was practical method for predicting slippage at maximum tensile strength and slippage at rupture of structural lightweight concretes.
The fatigue load of a turbine blade has become more important because the size of commercial wind turbines has increased dramatically in the past 30 years. The reduction of the fatigue load can result in an increase in operational efficiency. This paper numerically investigates the load reduction of large wind turbine blades using active aerodynamic load control devices, namely trailing edge flaps. The PD and LQG controllers are used to determine the trailing edge flap angle; the difference between the root bending moment and its mean value during turbulent wind conditions is used as the error signal of the controllers. By numerically analyzing the effect of the trailing edge flaps on the wind turbines, a reduction of 30-50% in the standard deviation of the root bending moment was achieved. This result implies a reduction in the fatigue damage on the wind turbines, which allows the turbine blade lengths to be increased without exceeding the designed fatigue damage limit.
Kim, Soo-Yung;Choi, Nam-Ki;Park, Ji-Il;Kim, Seon-Mi
Journal of the korean academy of Pediatric Dentistry
/
v.39
no.4
/
pp.366-372
/
2012
The aim of this study was to compare two commercial root canal medicaments, ProRoot MTA (Dentsply Tulsa, USA) and OrthoMTA (Bio MTA, Korea), by assessing the antimicrobial effects on three selected species commonly found in root canals of infected teeth, namely Enterococcus faecalis, Fusobacterium nucleatum and Staphylococcus epidermidis. Colonies of these bacteria were treated with varied concentrations of ProRoot MTA or OrthoMTA over different lengths of time. The results are as follows : 50, 25 and 12.5 mg/mL of ProRoot MTA or OrthoMTA did not completely inhibit the growth of E. faecalis, but a decreased growth rate was evident in comparison to the control (p < 0.05). 50 mg/mL of both materials successfully eliminated F. nucleatum during the first 24 hours. Regrowth of microbes after 24 hours, however, indicated a diminished effect of ProRoot MTA whereas OrthoMTA showed its continuously sustained antimicrobial actions (p < 0.05). 50 mg/mL of ProRoot MTA and 50, 25 mg/mL of OrthoMTA exerted their full antibacterial actions against S. epidermidis during the first 24 hours. Although the regrowth of colony was observed after 24 hours, the rate of growth was significantly decreased, approximating a complete inhibition (p < 0.05). The present study revealed that OrthoMTA, recently developed in Korea, had antimicrobial activity higher than ProRoot MTA.
The purpose of this study was to investigate the displacement of and the stress distribution on the prosthesis, abutment, and its supporting tissues under functional load, and the effect of alteration in root length of 2nd abutment. The 3-dimensional finite element method was used and the finite element models were prepared in which the abutments of left mandibular 5 unit axed partial denture were canine, the 1st pre-molar and the 2nd molar, and the root lengths of canines were as follows. Model I : Root length of canine was 2mm longer than the 1st premolar Model II : Root length of canine was 2mm shorter than the 1st premolar Static compressive force of 300N was applied to connector between 2nd premolar & 1st molar, and then von Mises stress, displacement and reaction force were obtained. The results were as follows : 1. In fixed partial denture, prosthesis under load on pontic was rotated around mesio-distal long axis of it from longual side to buccal, and simultaneously bended in buccal and gingival direction with mesial end deformed in gingival direction and distolingual end in occlusal. 2. Clinical crowns of abutments were bended in the same directions with those in which prosthesis deforms. Due to that, roots of anterior abutments were twisted in counterclockwise with concentration of shear stress on distal or distobuccal sides of their cervices, and that of posterior was in clockwise with concentration of shear stress on mesiobuccal side of it in the same level with anterior abutments. 3. In case that root length of the 2nd abutment was longer than that of the 1st abutment, its displacement and reaction force which means the force tooth exerts on the surrounding periodontal tissues were smaller but shear stress on itself was larger than in the case root length of 2nd abutment was shorter.
Herbicidal activity of $\delta$-aminolevulinic acid(ALA), an intermediate for the biosynthesis of tetrapyrroles such as chlorophyll, heme, bacteriochlorophyll, and vitamin $\textrm{B}_{12}$ analogues, was examined to determine the variation in phytotoxic potential against different plant species as affected by different application methods. Seed-soaking treatment, ALA at low concentrations did not affect shoot and root lengths of test plants while at highest concentration reduced them by 20 to 30%. Alfalfa showed the most tolerant response to ALA in both pre- and post-emergence application, and followed by rice. When applied with pre-emergence, cotyledons of Chinese cabbage were severely bleached with 0.5 mM of ALA at 24 hrs after application, and root growth of rice, barnyard grass, and alfalfa was significantly inhibited with increasing of concentration. With post-emergence application, ALA at 2 to 4 mM reduced shoot and root growths of Chinese cabbage and barnyard grass completely. Herbicidal effects of ALA were more enhanced in the treatment combined with 2,2-dipyridyl sthan single application in barnyard grass and Chinese cabbage. The results suggest that alfalfa was the most tolerant to ALA among the tested plants, and that post-emergence application of ALA exhibited greatest photodynamic activity against tested plants.
The influence of increasing livel (0.0, 0.05, 0.1, 0.2, 0.4, 0.6, 0.8, 1.2, 1.6, and 2.0%) fo NaCl on the germination of red fescue (Festuca rubra) 'Sea Breeze', tall fesce(Festucaarundinacea) 'Pixie', creeping red fescue (Festuca rubra ssp. rubra) 'Cindy', annual rye-grass (Lolium multiflorum) 'Permer Ⅱ', perennial ryegrass (Lolium perenne) 'Pennant', fairway wheatgrass(Agropyron cristatum), creeping bentgrass (Agrostis palustris) 'Penncross', and kentucky bluegrass (Poa pratensis) 'Nuglade' was investigated. Red fescue 'Sea Breeze', tall fescue 'Pixie', and creeping red fescue 'Cindy' had greater than 90% seed germination at NaCl concentrations of 0.2% or lower, while showing similar seeding shoot and root lengths and TAA50 values as the control. Creeping red fescue 'Cindy'gave at 0.6% or higher NaCl. Perennial ryegrass 'Pennant' and annual ryegrass 'Permer Ⅱ' showed more than 95% seed germination when NaCl concentrations were 0.4% and 0.8%, respectively. Fairway wheatgrass, creeping bentgrass 'Penncross' and Kentucky bluegrass 'Nugade' had showing similar germination percent, shoot and root lengths and T50 values as the control at NaCl concentrations of 0.1% or lower. In general, germination percent and the lengthes of seedling roots and shoots of all species tested decreased as NaCl concentrations iscreased. The T50 values became greater as NaCl concentration increased. Seed fermination in red fescue 'Sea Breeze', tall fescue 'Pixie',perennial ryegrass 'Pennant', and annual ryegrass 'Permer Ⅱ' was compoetely inhibited at 2.0% NaCl. Creeping red fescue 'Cindy' and fairway wheatgrass gardly germinated at 1.6% MaCl. Creeping bentgrass 'Penncross' and Dentucky bluegrass 'Nuglade' showed a complete inhibition of germination at 1.2% and 0.6% NaCl, respectively.
Park, Youn Jin;Lee, Young Su;Ann, Seoung-Won;Cho, Yong-Koo;Lee, Hyung-Won;Jang, Myoung-Jun
Journal of Environmental Science International
/
v.28
no.3
/
pp.385-392
/
2019
This study investigated the relationship among seven species of trichoderma through the identification of strains collected in Korea. The phylogenetic tree among the collected strains was classified into four groups. The trichoderma strains isolated in this way showed inhibitory effect on the fusarium wilt which is parasitic to cotyledon stem..The invisibility of J9, J10, J13 and J16 strains were higher in comparison with other strains in vitro test stand, and their spore production level was also higher. In the aluminum ring tests, it showed that the yield of the spores in J9, J10 and J13 were more than any other strain. As a result conducting the port test for cucumbers, the plant lengths of J13 were larger than the control plot, and the root lengths of all strains, except for J2 were longer than the control plot, and the root weights of J1, J9, J10, J13 and J16 were larger than the control plot. The disease severity for the fusarium wilt showed the smallest values at J13 and J16 in comparison with the control plot, and the control values of J13 and J16 were higher than other strains.
Hovius, Marilyn H. Y.;Saxena, Praveen K.;Proctor, John T. A.
Journal of Ginseng Research
/
v.31
no.1
/
pp.14-22
/
2007
As the zygotic embryo of North American ginseng (Panax quinquefolius L.) matured during stratification over 203 days it grew from 0.75 to 5.2 mm. Embryo excision and culturing on media containing different concentrations of two growth regulators, gibberellic acid ($GA_3$, 1 to 10 ${\mu}M$) and benzyladenine (BA, 1 to 5 ${\mu}M$), during stratification, showed that shoot and root number and the shoot, root and cotyledon length increased with increased stratification time. Gibberellic acid was the more effective growth regulator for increasing shoot and root number and shoot, root and cotyledon lengths. Immature embryos (stratified for up to 63 days) needed growth regulators for further development. Cultures on $GA_3$ at the last culture date (stratified for 203 days) when embryos were mature, produced multiple shoots but there was no effect of $GA_3$ concentration. Benzyladenine inhibited shoot and root growth regardless of embryo stratification. Growth regulators had little effect on cotyledon length of mature embryos. Embryos cultured on $GA_3$ combined with BA were green on all culture dates whereas greening in the control and BA treatments increased with culture date. The BA treatments induced 100% swelling of the embryos on the final culture date while in the control and $GA_3$ treatments there was no swelling. There was little or no curling in the control and BA treatments and a linear decrease in curling with culture date in the $GA_3$ and $GA_3$ + BA treatments.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.