• 한국자원식물학회지
• /
• 제26권6호
• /
• pp.709-717
• /
• 2013

The objective of this study was to examine the effect of root pruning intensity in combination with different initial seedling size on the growth of transplanting seedlings of Quercus acutissima. One-year-old seedlings were divided into three groups depending on their height, i.e. small (< 15 cm), medium (25-35 cm) and large size (35 cm <). Root of seedlings was pruned by three intensity such as, leaving 5 cm (severe), 10 cm (medium) and 15 cm (light) of taproot from the root-collar. After one year, we investigated survival rate, height and root-collar diameter (RCD) increment and final shoot dry weight. Also we measured characteristics of newly developed lateral roots such as number, total length, dry weight and diameter. Severe root pruning showed the lowest survival rate in all seedling size. Height increment, RCD increment and shoot dry weight were decreased with increasing intensity of root pruning. Seedlings of medium and light root pruning showed similar above-ground growth and dry weight of lateral roots. More large seedlings showed good survival rate, height increment and final shoot dry mass in all root pruning intensity. Therefore, one-year-old seedlings of Q. acutissima should be pruned taproot by 10 cm and transplanted to obtain excellent performance and increase the efficiency of transplanting work. Based on the findings of this study, it is important that applying to different root pruning intensity depending on initial seedling size for producing 2-year-old seedlings with excellent growth and high quality.

• Journal of Welding and Joining
• /
• 제1권1호
• /
• pp.37-46
• /
• 1983

This paper describes a study of fillet welded joint stressed perpendicular to the weld line. The finite element method was used to determine the stress intensity factor for cruciform joint at weld toe and root cracks according to variation of H/Tp, weld angle and main plate thickness. But, in this study, weld angle was fixed at 45.deg., since the variation of weld angle affect the stress intensity factor little, also main plate thickness was fixed. Pulsating tension fatigue test was done at the second phase of experiment. The work using the concepts of the fracture mechanics on the stable crack growth, was in the correlation of the experimental fatigue stress-life behavior because the fatigue behaviors of various joint geometries are related to the stress intensity factors calculated by F.E.M. analysis. Main results obtained are summarized as follows. 1) According to the propagation of toe crack, the variation of the stress intensity factor at root crack is obvious as H/Tp is smaller. 2) According to the propagation of root cracks, the change of the stress intensity factor of the toe is very large with propagation of root crack. 3) The calculation formula of the stress intensity factor of crack propagation at the root crack was obtained. 4) The calculation formula of the stress intensity factor at the toe cracks was obtained in similar manner. 5) From the results of experiment, the velocity of fatigue crack propagation at the weld toe and root was estimated.

• Journal of Ginseng Research
• /
• 제15권1호
• /
• pp.31-35
• /
• 1991

In order to know the optimum planting density under shading structures at different light intensity, We investigated the growth status, distribution of ginseng leaf area, correlation between planting density and root weight per plant and yield, correlation between leaf area index and root weight per plant and yield. According to the increase of planting density the leaf area per plant was decreased, but leaf area index (L.A.I) was increased. Ginseng leaf population at different lines under common straw shading were distributed mainly in frost lines but polyethylene net shading at 10fo light intensity were distributed equally in all lines. Optimum planting density in common straw shading at 5% light intensity was 55 plant per tan (90 cmX180 cm) and polyethylene net shading 81 10% light intensity was 60 plant per tan, in consideration of root weight and yield. Optimum leaf area index was 2.4 under common straw shading at 5% light intensity but was 2.7 under polyethylene net shading at 10% light intensity.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제16권2호
• /
• pp.49-56
• /
• 2008

A preliminary survey on the incidence and intensity of root disease complex (association of Meloidogyne incognita and root rot pathogens) was carried out in the sericultural areas of Karnataka. A total of 280 mulberry gardens were surveyed in 14 districts of Karnataka belonging to different types of soil (red sandy, red loamy and black cotton), farming systems (irrigated and rainfed), varieties (V-1, K-2, Local and S-13) and age of the plants (0-5, 5-10 and 10-15 years). It was observed that the association of M. incognita with Botryodiplodia theobromae and Fusarium solani causes the root disease complex in mulberry. Of the 280 gardens visited, 94 were infested with the disease complex and incidence was recorded as 33.6%. The higher intensity of root disease complex was observed when the root system had more than 100 galls/plant with infection of mixed population of B. theobromae and F. solani in sandy soil under irrigated farming. The 5-10 years old mulberry plantation with V-I variety was found to be most susceptible to root disease complex. Districts like Mysore, Kolar, Mandya, Tumkur, Chitradurga and Bangalore were observed as sensitive areas. Further, the wounds caused by M. incognita in mulberry roots favour the easy entry of root rot pathogens, which increased the severity of the disease very fast.

• Journal of Ginseng Research
• /
• 제15권1호
• /
• pp.21-30
• /
• 1991

This study was conducted to know the elects of light intensity of polyethylene net shading on the growth status, photosynthesis and root yield of ginseng plants. Polyethylene net shading of loft transmittance was the best one among light intensities of polyethylene net used in view of photosynthesis and decreasing of early leaf defoliation. According to increase of light intensity under the shading chlorophyll contents of ginseng leaves were decreased. As it was increased over 2 mg/g Photosynthesis and total saponin of leaves showed on the decrease remarkably. The rate of alternaria blight of ginseng plants showed the positive correlation between light intensity and leaking rate. The shading of 10% transmittance in root yield was increased by 40% in 6-year-old ginseng plant as compared with common straw shading, due to decreased missing plant and increased root weight.

• 한국작물학회지
• /
• 제25권4호
• /
• pp.91-98
• /
• 1980

Three kinds of shading materials, styrol-foam board, pine board and polytex, were examined and compared with ordinary shading, and the effects of light intensity and the temperature under the shadings on the photosynthesis and the root growth of the Korean ginseng were studied to improve the shading on the ginseng field. The amounts of photosynthesis of the ginseng leaves at 2$0^{\circ}C$ were significantly larger than those at 3$0^{\circ}C$ in the same light intensity. At 2$0^{\circ}C$, the maximum photosynthesis occured at 35, 000 lux, but at 3$0^{\circ}C$, the amount of photosynthesis was rapidly reduced by higher light intensity over 26, 200 lux. The best root growth occurred under the polytex shading and the styrol-foam board shading was also effective for ginseng growth. Under the ordinary shading, the root growth of ginseng planted on rear line was very poor but under the styrol-foam or the polytex shading, the root growth showed little difference between the ginsengs planted on rear line and front line.

• Journal of Ginseng Research
• /
• 제12권1호
• /
• pp.40-46
• /
• 1988

3년생 인삼에서 5, 10 및 20% 투광율 일복간에는 경장, 경직경, 엽면적, 근장의 차이가 없었고 근직경은 10% 및 20% 일복구에서 현저히 굵었으며 20%구에서 근중이 가장 무거웠다. 6년생 인삼에서도 20% 일복구에서 가장 근직경이 굵었고 근장은 투광율에 영향을 받지 않았으며 20% 투광 일복하에서 가장 근중이 무거웠다 근중의 증가를 위한 최적 일복투광량은 3년근에서는 18.13% 그리고 6년근에서는 21.50% 추정되었다.

• Journal of Welding and Joining
• /
• 제26권6호
• /
• pp.97-102
• /
• 2008

It is well known that there exist two typical fatigue crack initiation locations in ship structures: one is the weld toe and the other is the weld root where partial penetration weld is performed. In particular, it is important for fillet weldments to avoid weld root cracking in order to prevent catastrophic failure particularly in ship structures. Therefore detail considerations are required for cruciform joints with partial penetration when there is a possibility of weld root crack initiation. For these reasons, fatigue tests on welded joints were performed in this study. Concept of stress intensity factor(SIF) by means of fracture mechanics is applied for predicting fatigue life of fillet welded joints.

• 임산에너지
• /
• 제19권1호
• /
• pp.7-12
• /
• 2000

본 실험은 광도가 곰솔(Pinus thunbergii Parl.) 유묘의 생장과 물질생산에 어떠한 영향을 미치는 가를 알고자 자연전광이 100, 50, 30, 10% 및 2%로 조절된 야외포지에서 1997년 5월부터 1998년 10월까지 실시되었다. 곰솔의 수고생장 및 근원경생장은 1,2차년을 통하여 자연전광에서 가장 높악으며, 50%에서의 수고생장은 1,2차년도 각각 대조구의 96.4, 88.9%로, 근원경생장은 각각 94.1 77.6%로 조상되엇다, 30%이하로 상대광도가 낮아질수록 수고 및 근원경생장이 급격히 감소 되었으며, 근원경생장의 감소율이 수고생장의 감소율보다 높게 나타났다. 2차년도의 2%에서는 시험 유묘 모두가 고사하였다. 물질생산량도 광도가 낮아짐에 따라 감소되었으며, 1, 2차년도 모두 뿌리의 감소율이 잎, 줄기보다 높았고, 1차년도에는 줄기의 감소율이, 2차년도에는 잎이 감소율이 가장 낮았다. T/R율은 1차년도에는 50%에서,3.55, 2차년도에는 10%에서 4.88로 가장 높았다.

• Safety and Health at Work
• /
• 제12권4호
• /
• pp.505-510
• /
• 2021

Background: Factors related to root causes can cause commonly occurring accidents such as falls, slips, and jammed injuries. An important means of reducing the frequency of occupational accidents in small- to medium-sized enterprises (SMSEs) of South Korea is to perform intensity analysis of the root cause factors for accident prevention in the cause and effect model like decision models, epidemiological models, system models, human factors models, LCU (life change unit) models, and the domino theory. Especially intensity analysis in a robot system and smart technology as Industry 4.0 is very important in order to minimize the occupational accidents and fatal accident because of the complexity of accident factors. Methods: We have developed the modern cause and effect model that includes factors of root cause through statistical testing to minimize commonly occurring accidents and fatal accidents in SMSEs of South Korea and systematically proposed educational policies for accident prevention. Results: As a result, the consciousness factors among factors of root cause such as unconsciousness, disregard, ignorance, recklessness, and misjudgment had strong relationships with occupational accidents in South Korean SMSEs. Conclusion: We conclude that the educational policies necessary for minimizing these consciousness factors include continuous training procedures followed by periodic hands-on experience, along with perceptual and cognitive education related to occupational health and safety.