• 한국토양비료학회지
• /
• 제46권6호
• /
• pp.525-529
• /
• 2013

As most of citrus, shiranuhi mandarin ((Citrus unshiu ${\times}$ C. sinensis) ${\times}$ C. reticulata) mainly use the trifoliate orange (Poncirus trifoliata) as its rootstock which has dwarf and cold hardness in Korea. However, recently, scion root was observed in 'Shiranuhi' mandarin tree grafted onto the trifoliate orange. This study was carried out to find out effects of scion root occurrence on the fruit quality, flowering and yield of shiranuhi mandarin. For the experiment, we selected six farmers who have outbreak of scion root in their Shiranuhi mandarin orchards and surveyed the difference of fruit quality of shiranuhi mandarin hybrid between scion root and control (trifoliate orange root). In the results, flowering was severely decreased in scion root trees compared to control. As a result of survey of 174 Shiranuhi mandarins, 160 trees were proved to be scion root, and had less flowering. Fruiting of scion root also severely dropped compared to control and thus, yields of scion root (6.4 kg) reduced by 24% compared to control (26.7 kg). The fruit size, weight and soluble solid contents of scion root were significantly reduced, but there were no differences in acid contents and coloring of fruit. From the results, we concluded that scion root had negative influence on flowering, fruit size and the yields of Shrinanuhi mandarin hybrid.

• 한국지역사회생활과학회지
• /
• 제27권4호
• /
• pp.817-829
• /
• 2016

In order to develop functional hamburger steak patties, various concentrations of lotus root (Nelumbo nucifera) were incorporated into them. The quality characteristics of the hamburger patties prepared after the addition of 5, 10, 15, 20 or 25% (w/w) lotus root were investigated. The moisture contents of the groups with lotus root were significantly higher than that of the control group. The crude fat and crude protein contents of the control group were higher than those of the other groups. No significant difference in the crude ash content was observed among the groups. The cooking loss rate, rate of reduction in diameter, and reduction in thickness of the groups with lotus root were significantly lower than those of the control group. Accroding to the results, lotus root inhibit cooking loss and help to keep moisture after cooking process. No significant difference in the L value was observed among the groups. The a and b values of the groups with lotus root were significantly decreased compared to those of the control group. No significant difference in hardness was observed among the groups. it suggest lotus root didn't affect the texture of hamburger patties. In the quantitative descriptive analysis, no significant difference in the color and fresh odor was observed among the groups. The groups with lotus root were softer than the control group. The groups with 10 to 25 % of lotus root showed higher juiciness and a sweeter taste than the control group. The preference of appearance, texture, flavor and overall acceptability of the groups with 10 to 25% lotus root were higher than those of the other groups, including the control group. In conclusion, lotus root can increase the acceptability of hamburger patties and 10-25% would appear to be the proper amount of it to use.

• Journal of Periodontal and Implant Science
• /
• 제25권3호
• /
• pp.614-622
• /
• 1995

Root caries is very frequently developed on exposed root surface after periodontal surgical treatment. In order to determine the anti-caries effect of Nd : YAG laser irradiation on periodontally exposed root surface, 40 mandibular molar teeth that had been extracted due to excessive periodontal destruction were used as the experimental teeth. All teeth were treated by the same procedure as conventional periodontal root treatment, ie thorough scaling, root planing and root conditioning with tetracycline HCl(100mg/ml, 5min.). Within middle one third of root, mesial half surface(20) or distal half surface(20) was randomly irradiated at various power of 1.0W, 2.0W, 3.0W and 4.0W for 60 seconds by non-contact(5mm) delivery of a pulsed Nd : YAG laser(EN.EL.EN060, Italy). The microhardness was measured by Vikers microhardness tester(Wilson, USA) at 2mm/second of jog speed under 100gm load. The difference of microhardness between irradiated side and non-irradiated side was statistically analyzed ANOVA and Duncan's method. Following results were obtained ; 1. The microhardness(Knoop hardness number) was significantly higher in laser irradiated surface than non-irradiated surface(p<0.05). 2. There was no significant difference in microhardness between experimental groups classified by different laser power(p>0.1). The results suggest that Nd : YAG laser irradiation on exposed root suface after periodontal therapy may inhibit the root caries development by enhancing surface microhardness.

• 열처리공학회지
• /
• 제4권3호
• /
• pp.39-46
• /
• 1991

The effects of austenitizing temperatures and times and cooling rate on the characteristics of continuous air cooling have been investigated for 0.3%C-Mn steels microalloyed with vanadium. Transformation start temperatures have been found to be measured from temperature-time curve directly obtained with continuous air cooling and to decrease with increasing austenitizing temperature, cooling rate and Mn contents. The coarsening behavior of austenite grain size has been measured to abnormally grow at $1050^{\circ}C$ and rapidly grow at $1200^{\circ}C$. It has been found that the volume fraction of pearlite was linealy proportional to the reciprocal square root of austenite grain size. The hardness has been measured to increase with increasing cooling rate up to $250^{\circ}C/min.$ and to remain relatively unchanged in the range of $250{\sim}400^{\circ}C/min.$ showing that hardness valves for steel with a higher Mn content increase more than those for steel with a lower Mn content. The impact property has been found to decrease with increasing of austenite grain size but does not linealy change with the reciprocal square root of austenite grain size.

• 한국산림과학회지
• /
• 제66권1호
• /
• pp.16-36
• /
• 1984

화강암질풍화토(花崗岩質風化土)의 미교란(未攪亂) 시료(試料)를 사용하여 일면(一面) 직접(直接) 전단시험(剪斷試驗)으로 측정(測定)한 전단강도(剪斷强度)와 함수비(含水比), 간극비(間隙比), 건조밀도(乾燥密度), 비중(比重)과의 관계(關係)를 통계(統計) 분석(分析)하였고, 화강암질풍화토(花崗岩質風化土)의 사방시공지(砂防施工地)에 식재(植栽)된 리기다소나무림(林)과 리기테-다소나무림(林)에서 토양단면(土壤斷面)을 만들어 산중식토양경도계(山中式土壤硬度計)로 토양(土壤)의 견밀도(堅密度)를 측정(測定)하고 수근분포(樹根分布)를 조사(調査)하여 통계(統計) 분석(分析)한 결과(結果) 다음과 같다. 1) 함수비(含水比), 간극비(間隙比)와 전단강도(剪斷强度) 간(間)에는 유의적(有意的)인 부(負)의 상관(相關)이며 직접적(直接的)인 관계(關係)에 있었다. 2) 건조밀도(乾燥密度)와 전단강도(剪斷强度) 사이에는 정(正)의 상관(相關)이며 직접적(直接的)인 관계(關係)에 있었다. 3) 비중(比重)과 전단강도(剪斷强度) 간(間)에는 유의적(有意的)인 상관관계(相關關係)를 인정(認定)할 수 없었다. 4) 전단강도(剪斷强度)에 영향(影響)을 미치는 영향요소(影響要素)의 직접효과(直接效果)의 크기는 함수비(含水比)>간극비(間隙比)>건조밀도(乾燥密度)의 순위(順位)이다. 5) 다중선형(多重線型) 회귀방정식(回歸方程式)의 분산분석결과(分散分析結果) 함수비(含水比)만이 회귀성(回歸性)이 인정(認定)되므로 함수비(含水比)를 독립변수(獨立變數)로 하여 전단강도(剪斷强度)를 추정(推定)하기 위한 회귀방정식(回歸方程式)은 제한(制限)된 건조밀도(乾燥密度)의 범위내(範圍內)에서 적합도(適合度)가 매우 높게 평가(評價)되었다. 6) 토양(土壤)의 견밀도(堅密度)는 토심(土深)이 깊어짐에 따라 높아진다. 7) 토양(土壤)의 지표경도(指標硬度)와 수근수(樹根數) 간(間)에는 유의적(有意的)인 부(負)의 상관(相關)이며 직접적(直接的)인 관계(關係)에 있었다. 8) 리기다소나무와 리기테-다소나무의 수근(樹根)은 토심(土深) 20cm까지에 대부분 분포(分布)하고 있었다. 9) 리기다소나무림(林)과 리기테-다소나무림(林)에서 측정(測定)한 토양(土壤)의 지표경도(指標硬度)를 독립변수(獨立變數)로한 회귀방정식(回歸方程式)으로 수근수(樹根數)를 추정(推定)할 수 있었으나 낮은 적합도(適合度)를 나타내었다.

• 열처리공학회지
• /
• 제1권1호
• /
• pp.1-7
• /
• 1988

In this study the improvement of mechanical properties of ion-nitrided SACM-1 steel was investigated by analysing microstructural developments and hardness increase in the nitrided surface layer. Specimens were quenched at $570^{\circ}C$, which is lower than the eutectoid temperature ($590^{\circ}C$) of Fe-N binary system after nitrided at temperature of $460-570^{\circ}C$ for 2-8 hours under constant pressure of 8 torr. The depths of diffusion and compound layers were appeared to proportional to the root mean square time of nitriding. And the hardness showed the maximun value Hv = 1200 for the specimen nitrided at $530^{\circ}C$. Hardness distribution of the. ion-nitrided steels were increased by diffusion treatment below the eutectoid temperature of the Fe-N binary system. A prolonged heat treatment below the eutectoid temperature was attributed to the increase in the depth of diffusion layer at the expense of the decrease in surface hardness of the ion nitreded steel.

• 생물환경조절학회지
• /
• 제13권3호
• /
• pp.172-177
• /
• 2004

착색단고추 비닐하우스 토경재배시 품종별 온도조건에 따른 열과 발생원인을 구명코자 하였다 열과발생률은 품종간에는 Fiesta가 Jubilee보다 높았고 온도처리간에는 $34^{\circ}C$ 고온구에서 높았다. 그리고 환경조건이 좋아지는 4월 이후에 급격히 증가하였다. 과육특성 조사결과 Fiesta품종과 고온처리구에서 과육경도와 건물률이 낮았으나 과육두께는 경향이 일정치 않았다. 과육의 무기성분 함량은 품종간, 온도처리간에 차이가 없었다. 수확시 뿌리상태는 Fiesta품종이 Jubilee보다 좋았고, 온도처리간에는 차이가 없었다. 이상의 결과로 과육의 경도, 건물률, 치밀도 및 뿌리상태 등이 열과발생에 직접적인 영향을 미치고 과육두께나 과육의 무기성분 함량등은 열과발생과 상관이 없는 것으로 나타났다.

• Restorative Dentistry and Endodontics
• /
• 제15권2호
• /
• pp.93-103
• /
• 1990

The primary purpose of this study was to assess the effect of the EDTA on human dentin hardness of root. The 30 extracted human anterior teeth were divided into three groups, and EDTA was applied on the each tooth root dentin surface for 5, 15 and 30 minutes to evaluate the dentin hardness. The following results were obtained : 1. The KHN of dentin was decreased by 21.3% from 50.8 to 40.0 in 5 min. group, 44.2% from 48.4 to 27.0 in 15 min. group, and 51.9% from 48.0 to 23.1 in 30 min group. 2. The decrease rate per 1 min. of KHN of dentin was 4.3 in 5 min. group, 2.9 in 15 min. group, and 1.7 in 30 min. group. 3. As time passed, the KHN of dentin of 5 min. group and 15 mim. group were significantly decreased, but the KHN of dentin of 30 min. was not significantly decreased compared with 15 min. group. There was a statistical significance in the decrease rate of KHN of dentin among 3 groups(P<0.05).

• 한국약용작물학회지
• /
• 제12권1호
• /
• pp.10-16
• /
• 2004

밭재배와 논재배처럼 토양환경이 상이한 조건에서 재배된 인삼의 지상부 생육의 경시적 변화 및 근부특성과 성분함량 차이를 비교하기 위해 금산지방의 직파재배 4년근 밭재배 및 논재배 농가포장을 선정하여 시험한 결과는 다음과 같다. 1. 논토양의 미사와 점토함량 그리고 토양수분과 공극율은 밭토양보다 뚜렸히 높았는데, 재배기간 동안의 토양수분함량 범위는 논재매 $17.5{\sim}19.5%$로 적당하였으나 밭재배는 $7.0{\sim}12.8%$로 낮은 수분함량을 보였으며, 논토양은 밭토양보다 인산과 칼슘함량이 적으나 염류농도와 유기물, 질산태질소, 칼륨, 마그네슘 함량이 높아 비교적 양호한 토양조건을 보인 관계로 초장, 생체근중 및 주당건물중 등 지상부와 지하부 생육은 논재배가 밭재배보다 양호한 생육을 보였다. 2. 논 밭재배간 순동화율 (NAR)과 작물생장율 (CGR) 직이 치밀하지 못했다는 Mog et al. (1981)의 보고와 비슷한 결과를 보였다. 표 5와 같이 생체근중의 분포비율은 직파 4년 재배에서 논 밭재배 모두 100 g 이상의 인삼은 생산되지 않았는데, 60 g 이상인 것의 비율이 논재배 5.3%로 밭재배 0.9%에 비해 많았으며 40 g 이상인 것의 비율도 논재배가 밭재배보다 높았다. 은 5월과 9월에 가장 뚜렸한 차이를 보였으며, 논재배시 근중은 9월 수확기에 가장 큰 증가를 보였으나 밭재배는 9 월에 조기낙엽 증가로 인하여 근중비대가 정지되어 뚜렸한 차이를 보였다. 3. 수삼수량은 논재배가 밭재배보다 약간 많으나 유의적인 차이는 없었으며, 적변 발생율도 논 밭재배간 유의적인 차이가 없었다. 4. 논 밭재배간 동체직경과 동체장, 뿌리의 수분함량 및 조사포닌과 50% 에탄올 추출 엑스함량은 유의적인 차이를 보였는데, 조사포닌과 엑스함량은 밭재배가 높았다. 5. 동체의 경도는 $5{\sim}8$월까지 논 밭재배 간에 서로 비슷하였으나 9월에 밭재배는 급격히 감소하여 뚜렸한 차이를 보였다.

• 한국환경복원기술학회지
• /
• 제5권3호
• /
• pp.23-30
• /
• 2002

In recently, using of steel reinforcements by reinforcing materials of the reinforced earth, micro-pile and root-pile etc,. is wide-spreading in the stabilizing control of cutting and embankment slopes, but the failure mechanism of reinforced earth as well as the effect of insert angles or types of reinforcement and others are not defined clearly. In this study, therefore heavy-duty direct shear tests were exercised on the reinforced soil and the non-reinforced soil, which was executed for research on the interaction of soil-reinforcement and theirs behavior. The hardness and softness and the standard sands were used for modeling of reinforced soil, the material constants for the computer simulation were estimated from the results of CD-Test. The effects of reinforcing and of friction increasing on the softness, area ratio of reinforcements is equal, were the better than them of the hardness, as well the reinforcing effects of shear strength without regard to the area ratio is much the same at $10^{\circ}$, insert angle of reinforced bar, differ from them of the existing study. Then, the results of numerical analysis showed that the behavior of reinforcements displayed bending resistance and shear resistance at $15^{\circ}$ and $30^{\circ}$, respectively. Also, the state of strain transfer was observed and the behavior of resistance mechanism on reinforcements presented almost the same them of landslides stabilizing pile.