• Journal of Korean Neurosurgical Society
• /
• 제62권4호
• /
• pp.414-421
• /
• 2019

Objective : To evaluate 3-dimensional magnetic resonance imaging (MRI) of Kambin's safe zone to calculate maximum cannula diameter permissible for safe percutaneous endoscopic lumbar discectomy. Methods : Fifty 3D MRIs of 19 males and 31 females (mean, 47 years) were analysed. Oblique, axial and sagittal views were used for image analysis. Three authors calculated the inscribed circle (cannula diameter) individually, within the neural (original) and bony Kambin's triangle in oblique views, disc heights on sagittal views and root to facet distances at upper and lower end plate levels on axial views and their averages were taken. Results : The mean root to facet distances at upper end plate level measured on axial sections increased from $3.42{\pm}3.01mm$ at L12 level to $4.57{\pm}2.49mm$ at L5S1 level. The mean root to facet distances at lower end plate level measured on axial sections also increased from $6.07{\pm}1.13mm$ at L12 level to $12.9{\pm}2.83mm$ at L5S1 level. Mean maximum cannula diameter permissible through the neural Kambin's triangle increased from $5.67{\pm}1.38mm$ at L12 level to $9.7{\pm}3.82mm$ at L5S1 level. The mean maximum cannula diameter permissible through the bony Kambin's triangle also increased from $4.03{\pm}1.08mm$ at L12 level to $6.11{\pm}1mm$ at L5S1 level. Only 2% of the 427 bony Kambin's triangles could accommodate a cannula diameter of 8mm. The base of the bony Kambin's triangle taken in oblique view (3D MRI) was significantly higher than the root to facet distance at lower end plate level taken in axial view. Conclusion : The largest mean diameter of endoscopic cannula passable through "bony" Kambin's triangle was distinctively smaller than the largest mean diameter of endoscopic cannula passable through "neural" Kambin's triangle at all levels. Although proximity of exiting root to the facet joint is always taken into consideration before PELD procedure, our 3D MRI based anatomical study is the first to provide actual maximum cannula dimensions permissible in this region.

• Journal of Forest and Environmental Science
• /
• 제30권2호
• /
• pp.218-225
• /
• 2014

Studies were carried out to standardize and develop a suitable macro-propagation technology for large scale production of superior clonal stock through stem cuttings in Commiphora wightii Arnott (Bhandari), a data deficient medicinal plant of arid region. For the purpose, three experiments were conducted. The first experiment was tried to elucidate the impact of various cutting diameters (0.50-0.75 cm, 0.75-1.00 cm, 1.00-1.50 cm, and >1.50 cm) in combination with varying growing conditions (sunlight, shade house and mist chamber) on shoot sprouting and rooting without using exogenous plant growth regulators. Cutting diameter (size 0.75-1.00 cm) in mist chamber has shown maximum sprouting (90.00%) and rooting (73.33%), primary root (6.67) and secondary root (16.67) followed by 1.00-1.51 cm in mist chamber. Minimum sprouting (40.00%), rooting (33.33%), number of shoot (1.33), primary root (1.00) and number of secondary root (1.00) was recorded in cutting diameter (size >1.50 cm) in sunlight. Second experiment was performed to find out optimum growth regulator concentration of rooting hormone (100, 200, 500 and 1000 ppm) of Indole-3-acetic acid (IAA) and Indole-3-butyric Acid (IBA) on adventitious root formation on cuttings diameter (size 0.25-0.50 cm) in comparison to control. Maximum rooting percentage (93.33%) was recorded in 200 ppm followed by 500 ppm (86.66%) of IBA as compared to control, which showed only 60 per cent sprouting. Third experiment was performed with newly formed juvenile micro-cuttings treated with varying concentrations of IAA and IBA. The juvenile cuttings (size 6-10 cm, basal dia <0.25 cm) were selected as micro-cuttings. The cuttings treated with IBA (500 ppm) showed 64.30% rooting as compared to other treatments. Results of above experiments indicate that cuttings (size 0.75-1.00 cm dia) may be developed in mist chamber for better performance. While using heavier cuttings, no growth promoting hormones is required however; growth regulator 200 ppm concentration of IBA rooting hormone was observed optimum for promoting macro-propagation in stem cuttings of lower diameter class (0.25-0.50 cm).

• 한국약용작물학회지
• /
• 제8권3호
• /
• pp.283-289
• /
• 2000

내추대성 참당귀 노지육묘 이식재배시 묘두직경에 따른 생육 및 추대반응을 구명하고자 수행한 시험결과를 요약하면 다음과 같다. 출현율은 묘두직경이 클수록 높고 적올수록 낮았으며, 지상부 및 뿌리생육은 묘두직경이 클수록 양호하고 묘두직경이 적을수록 부진하였다. 추대시기는 묘두직경이 굵을수록 빨라지고 적을수록 늦어졌으며, $0.11{\sim}0.3,\;0.31{\sim}0.5,\;0.51{\sim}0.7,\;0.71{\sim}0.9,\;0.91{\sim}1.1cm$로 묘두직경이 굵어짐에 따라 각각 0.2%, 1.6%, 3.3%, 11.8%, 46.6%로 증가되었다. 10a당 수량은 $0.51{\sim}0.7cm$에서 319kg 으로 가장 높았으며, $0.51{\sim}0.7cm$보다 묘두직경이 작을수록 수량이 낮아지고 0.91cm 이상 묘에서는 추대율이 높아 수량이 낮았다. 추대율은 초장과 정(正)의 상관을 보였으며, 건근수량은 추대율과 부(負)의 상관을 보였다. 추대율이 비교적 낮고 수량이 가장 많은 묘두직경은 $0.51{\sim}0.7cm$였으며, 당귀재배시 적정 묘두직경의 범위는 $0.31{\sim}0.7cm$였다.

• Journal of Plant Biology
• /
• 제31권3호
• /
• pp.169-185
• /
• 1988

Vessel elements in lateral root, tap root, transition region, stem and mid vein of 1-year old, 3-year old and 5-year old ginseng (Panax ginseng C.A. Meyer) are studied with light microscope to clarify the distribution and differentiation of several kinds of vessel elements. Vessel elements are classified into five types such as ring vessel, spiral vessel, scalariform vessel, reticulate vessel and pitted vessel according to the secondary thickenings of cell wall. All of the five types are not observed in each organ, but diverse kinds of vessels are present in stem and mid vein compared with the underground organs such as tap root and lateral root. The length of vessel elements is longest (680$\mu$m) in stem and shortest (143$\mu$m) in tap root. The diameter of vessel elements is 19.0$\mu$m in tap root and the angle of perforation plate comes under 22$^{\circ}$-60$^{\circ}$. The degree of differentiation of vessel elements according to the length, diameter and angle of perforation plate of vessel elements is highest in tap root regardless of the age of ginseng. Three types of perforation plate such as scalariform, intermediate type of simple and scalariform, and simple perforation plate are observed. The vascular tracheids are characteristically observed in mid vein of 1-year old ginseng, and in transition region of 3 and 5-year old ginseng.

• Journal of the Korean Wood Science and Technology
• /
• 제19권3호
• /
• pp.27-34
• /
• 1991

Screw withdrawal test was carried out on the face and edge of domestic particleboard and medium density fiberboard in order to evaluate optimum pilot hole diameter. The obtained results were as follows: 1. Maximum withdrawal strengths on the face and edge of particleboard were obtained with pilot hole diameters at about 50% of root diameters of screw. 2. Maximum withdrawal strength on the face and edge of medium density fiberboard were obtained with pilot hole diameters that were about 60% and 50% of root diameters of screw, respectively. 3. Withdrawal strength showed about 91% of maximum withdrawal strength when pilot holes were not pre bored at particleboard. but when pilot holes at 90% of root diameter of screw withdrawal strength showed about as 51.3% of maximum withdrawal strength. 4. Withdrawal strength showed about 88% of maximum strength when pilot holes were not used, but withdrawal strength indicated 55.4% of maximum strength in case of 90% of root diameters of screw. 5. Maximum withdrawal strength on the face of particleboard was about 70.5% higher than that of the edge, and however medium density fiberboard was about 19.6% higher than that of the edge.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2020년도 추계국제학술대회
• /
• pp.59-59
• /
• 2020

Salix gracilistyla has a characteristic of fast growth especially in the river side or infertile soil, showing a lot of lateral branches and a strong root system among the Salix. spp. On the basis of results observed, we provide several growth characteristics of S. gracilistyla among some selected provenances. In two-year results, root collar diameter ranged from 33.5 mm to 56.7 mm. Taeback showed the lowest value, and Jeongseon and Hoengseong were higher than the other areas in the traits above. Height growth was the lowest in Samcheok and the highest in Wonju. To examine growth and development of lateral branches is important because S. gracilistyla has a lot of lateral branches which account for high biomass production. Length of lateral branch showed high variation, in which the highest number was observed in Yeongwol and the lowest in Samcheok. Many lateral branches were shown in Wonju. Preliminary study on biomass resources evaluation, we analyzed correlation between volume and length, and volume and root diameter. High correlation was observed between root diameter and plant volume. And we compared the observed volume with the caculated volume by regression formula. To evaluate Salix species as biomass resources, it is needed to survey growth characteristics continuously and adopt selection of individuals or families of high biomass and caloric values by reliable data. In addition, Salix spp. can be also applicable to selection breeding regime because of feasible propagation and fast growth.

• Restorative Dentistry and Endodontics
• /
• 제44권2호
• /
• pp.15.1-15.8
• /
• 2019

Objectives: The aim of this study was to investigate whether the diameter and direction of the plunger and simulation of the periodontal ligament (PDL) affected the stress distribution in endodontically treated premolars. Methods: A fracture strength test was simulated via finite element analysis. A base model was set up, and the following parameters were modified: plunger diameter (3 mm vs. 6 mm), plunger direction (vertical vs. $135^{\circ}$ angular to the central fossa), and PDL simulation. The analysis was conducted using the CosmosWorks structural analysis program, and the results are presented in terms of von Mises stresses. Results: The smaller plunger increased the stresses at the contact area of the crown, but the plunger diameter had no effect on the stress distribution within the root. An angular plunger direction increased stresses within the root, as well as at the buccal cusp of the crown, compared with the vertical direction. Simulation of the PDL caused higher stress accumulation, especially in the cervical region of the root. Conclusions: The plunger diameter had no effect on the stress distribution in the roots, whereas the plunger direction and PDL simulation did affect the stress distribution. More stringent standards can be established by taking such parameters into account when performing fracture testing in future studies.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제30권1호
• /
• pp.60-71
• /
• 2008

The objective of this study is to evaluate the stress distribution according to the thread design and the marginal bone loss of a single unit dental implant under the axial and offset-axial loading by three dimensional finite element analysis. The implants used had the diameter of 5mm and 4mm with 13mm in length and prosthesis with a conical type which is 6mm in height and 12mm in diameter. The thread designs were triangular, square and buttress. In the three dimensional finite element model with $15\times15\times20mm$ hexahedron and 2mm cortical thickness, implants were placed with crown to root ratio 7:12, 10:9, 13:6 and 16:3. And additionally the axial force of 100N were applied into 0mm, 2mm and 4mm away from the center of the implants. The results were as follows 1. The maximum von-Mises stress in cortical bone was concentrated to cervical area of implant, and in cancellous bone, apical portion. 2. Comparing the von-Mises stresses in cortical bone of 2mm and 4mm offset loading with central axial loading, it were increased to 3 and 5 times in diameter 4mm implant, and 2 and 4 times, in diameter 5mm implant. 3. The square threads were more effective than the triangular and butress as the longer diameter, the offset loading, and the worse crown to root ratio. 4. The von-Mises stresses were relatively stable until crown to root ratio 13:6, but it was suddenly increased at 16:3. From the results of this study, minimum requirement of crown to root ratio of implant is 2:1, and in the respect of crown to root ratio, diameter and offset loading, square threads are more effective than triangular and buttress threads.

• 한국작물학회지
• /
• 제36권3호
• /
• pp.254-258
• /
• 1991

참 당귀를 시비와 무비 재배조건에서 근두경크기에 따른 생육 및 수량을 검토하여 참당귀재배체계확립을 위한 기초자료로 이용하고자 시험한 결과를 요약하면 다음과 같다. 1. 어느 근두경크기구에서나 초장, 두부경 및 경과과 엽의 생중량은 무비구보다 시비구에서 수치가 높았으나 출현율은 차이가 거의 없었다. 2. 초장과 경\ulcorner엽의 생중량은 7.2mm구에서, 두부경은 5.4mm구를 경계로 하여 그보다 작거나 크면 감소하는 경향이었다. 3. 추태율, 개화율 및 절수는 무비구보다 시비구에서 높았고 근두경이 커짐에 따라 증가하였으나 화총수는 7.2mm구를 경계로 하여 그보다 작거나 크면 감소하는 경향을 나타냈다 4. 근장, 지근수 및 생근중도 역시 시비구에서 높았으며 5.4mm구를 경계로 하여 그보다 작거나 커지면 감사하는 경향을 보였다. 5. l0a당 생근중 및 건근중은 시비의 3.1mm구와 무비의 5.4mm구에서 각각 가장 높게 나타났으나 시비의 3.1mm구가 무비의 5.4mm구보다높은 수치를 보였고, 7.2와 9.3mm구에서는 모두 목질화되었다. 6. 시비와 무비 재배조건하에서 근두경의 크기에 따른 유용형질들의 분산분석에서도 높은 유의차를 보였고 이들의 상호작용에도 모든 형질에서 유의성이 인정되었다.

• Imaging Science in Dentistry
• /
• 제36권3호
• /
• pp.137-143
• /
• 2006

Purpose : To evaluate location, distribution, diameter, and length of the nutrient canals on mandibular anterior region using a cone beam computed tomography (CBCT). Materials and Methods : Mandibular CBCT was performed on 33 adults (18 males and 15 females) with no history of systemic disease, and any other dental surgery history Location, distribution, diameter, and length of the nutrient canals on mandibular anterior region were radiographically evaluated. A statistical comparison was done by SPSS. Results : In the location and distribution of nutrient canals, they were found in 6.8% at labial portion above root apex, in 93.28% at lingual portion above root apex in 46.2% at labial portion below root apex, and in 53.6% at lingual portion below root apex. Nutrient canals at lingual portion above root apex were most frequently observed between central and lateral incisors, and those at labial and lingual portion below root apex were most frequently observed between central incisors. The mean diameters of nutrient canals were 0.54 mm at labial portion above root apex, 0.61 mm at lingual portion above root apex, 0.66 mm at labial portion below root apex, and 0.76 mm at lingual portion below root apex. The mean lengths of nutrient canals were 2.63 mm at labial portion above root apex, 3.74 mm at lingual portion above root apex, 4.51 mm at labial portion below root apex, and 6.77 mm at lingual portion below root apex. Conclusion : CBCT is useful device to evaluate the anatomical structure of nutrient canals on mandibular anterior region.