• Horticultural Science & Technology
• /
• v.31 no.2
• /
• pp.165-172
• /
• 2013

This study was conducted to investigate the effect of bulblet size on growth and bulb enlargement of Lilium Oriental hybrids, such as 'Sorbonne', 'Siberia', and 'Casa Blanca', grown in areas of high altitude (780 m), in 2009. The bulblets were oriented from tissue culture and planted to produce virus-free bulblets. All the three cultivars showed high vitality, with more than 93% producing shoots, even from small bulblets with a bulb circumference (BC) of less than 6 cm. Bulblets with BC 9-10 cm showed an increased height and number of leaves rapidly to induce the phase conversation from vegetative growth to reproductive growth. The bulblets of BC 9-10 cm in 'Sorbonne', 'Siberia', and 'Casa Blanca' had 2.0, 2.9, and 2.8 flower bud sets per plant, respectively. However, the flowers from those bulblets were not adequate as standard bulbs to produce cut-flowers for the domestic market. The larger bulblets showed more prosperous characteristics in growth and development of Lilium Oriental hybrids. Small bulblets had a high occurrence of viruses and leaf blight symptoms during cultivation, indicating the aggravated disease symptoms in the previously infected bulbs. 'Sorbonne' cultivars showed a high rate of enlargement of bulbs, and small bulblets under BC 6 cm produced more than 23% of the standard bulbs of BC 14-16 cm, which could produce cut-flowers for export. However, 'Casa Blanca' bulblets with BC 6-9 cm produced low bulbs of BC 14-16 cm at 21% level. 'Casa Blanca' cultivars had more bulb roots, longer root lengths, and higher weights than 'Sorbonne' and 'Siberia' cultivars. 'Casa Blanca' cultivars with BC over 9-10 cm grew rapidly and produced a high quantity of bulbs. In these results, 'Sorbonne' bulblets of BC 9-10, 'Siberia' bulblets of BC 10-12 cm, and 'Casa Blanca' bulblets of BC 10-12 cm produced 89%, 86%, and 93% of the standard bulbs of BC 14-16 cm, respectively. It is recommended that bulblets larger than the above sizes be used to produce cut-flowers for the export market. Experiment results suggest that production of bulbs larger than BC 18 cm requires bulblets that are larger than BC 12-14 cm of the three cultivars for the highest quality cut-flowers.

• Korean Journal of Plant Tissue Culture
• /
• v.21 no.3
• /
• pp.161-166
• /
• 1994

Since garlics (Allium sativum L.) are propagated through cloves, infection by virus or other pathogens may become severe problem if not using high quality seed bulbs every year resulting in the reduction of yield and bulb quality, In order to solve this problem, the establishment of virus-free bulb production and its supply system have been required because no chemicals were found to eliminate viruses from seed bulbs. This experiment was conducted to develop an effective production technique of high quality seed bulbs using shoot-tip culture. Over 90% of shoot-tips explanted on January L 1990 were survived at constant temperature of either 20, 24 or 28$^{\circ}C$, wheres 88% at alternate temperature (28/20$^{\circ}C$). The growth of shoot and root was most vigorous at constant 24$^{\circ}C$, and least at alternate temperature (28/20$^{\circ}C$) condition. When shoot-tips were explanted June 21 to August 1,1991, survival and growth of shoot-tips was most vigorous on MS medium supplymented with 0.1 mg/L NAA and 2 mg/L kinetin and least 1 mg/L Gh$_3$. The shoot-tips taken from the seed bulbs stored at 4$^{\circ}C$ for 15 to 60 days were placed on MS medium, shoot growth and in vitro bulblet formation increased slightly as affected by the increase of told treatment period at 4$^{\circ}C$.

• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.109-125
• /
• 2004

In recent decades, microscopic simulation models have become powerful tools to analyze traffic flow on highways and to assist the investigation of level of service. The existing microscopic simulation models simulate an individual vehicle's speed based on a constant free-flow speed dominantly specified by users and driver's behavior models reflecting vehicle interactions, such as car following and lane changing. They set a single free-flow speed for a single vehicle on a given link and neglect to consider the effects of highway design elements to it in their internal simulation. Due to this, the existing models are limitted to provide with identical simulation results on both curved and tangent sections of highways. This paper presents a model developed to estimate the change of free-flow speeds based on highway design elements. Nine neural network models were trained based on the field data collected from seven different freeway curve sections and three different locations at each section to capture the percent changes of free-flow speeds: 100 m upstream of the point of curve (PC) and the middle of the curve. The model employing seven highway design elements as its input variables was selected as the best : radius of curve, length of curve, superelevation, the number of lanes, grade variations, and the approaching free-flow speed on 100 m upstream of PC. Tests showed that the free-flow speeds estimated by the proposed model were statistically identical to the ones from the field at 95% confidence level at each three different locations described above. The root mean square errors at the starting and the middle of curve section were 6.68 and 10.06, and the R-squares at these points were 0.77 and 0.65, respectively. It was concluded from the study that the proposed model would be one of the potential tools introducing the effects of highway design elements to free-flow speeds in simulation.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.40-40
• /
• 2010

산업현장에서는 파이프 또는 탱크류의 1GR용접에서 안정적인 이면비드를 가지는 루트패스 용접을 위해 2~3mm의 루트갭을 띄우고 용접봉 또는 필러와이어를 사용하는 TIG용접을 주로 한다. TIG용접은 고품질의 이면비드가 얻어지며, 용접인자의 제어가 쉽다는 장점이 있어 루트패스 용접에 많이 사용되고 있지만, 루트갭을 띄우면 이면비드는 잘 얻어지지만 용착금속량이 많아지게 되어 제작원가가 상승되고, 또한 소모성 와이어를 사용하는 GMAW에 비해 생산성이 낮다. 따라서, 안정적인 이면비드를 가지면서 생산성이 높은 1GR GMAW 루트패스 용접공정의 개발이 요구되지만, 이 경우도 루트갭이 2~3mm로 정해져 있으면 Fit-up공정에서 공수가 많이 필요하므로 근본적으로 루트갭이 없는 그루브에 대한 루트패스 용접이 더 바람직하다. 본 연구에서는 루트면 2.7mm를 가지는 U-그루브의 갭 없는 루트패스 용접에서 안정적인 이면비드가 형성되는 조건을 검토하기 위해 2.7t의 평판에 대하여 경사상진 각을 주고 기초 실험 후, U-그루브 맞대기 용접 실험을 진행하였다. 이 때, 경사상진 각은 용융금속이 중력으로 인해 아크 후방으로 밀리게 되고, 그로 인해 아크가 모재에 직접 닿게 되어 용입이 더 깊게되므로, 이면비드의 형성에 더 유리하다. 두께 2.7t의 연강 시편 2개를 갭 없는 I-그루브 맞대기 이음에서 Ǿ1.2 연강 솔리드 와이어를 사용하여 GMAW용접을 실시하였고, 용접전류, 용접속도, 경사상진 각, 위빙 폭, 위빙 주파수를 변경하여 각 조건에 대한 이면비드를 관찰하였다. 그 결과 경사상진 각 $25^{\circ}$, 전류 200A, 위빙폭 3mm, 위빙주파수 3Hz의 조건에서 안정적인 이면비드를 얻을 수 있었다. 또한, 현장에서 Fit-up중 발생할 수 있는 루트갭의 문제에 대하여 루트갭 1.2mm의 I-그루브 맞대기 용접에서 경사상진 각, 위빙 폭, 위빙 주파수는 갭 없이 실시한 실험에서 얻어진 가장 안정적인 결과를 사용하였고, 용접 전류, 용접 속도를 변경하여 이면비드를 관찰하였다, 그 결과 갭이 없을 때보다 약 80A 낮은 전류 조건인 120A에서 안정적인 이면비드를 얻을 수 있었다. 앞선 실험들을 기초로 하여 U-그루브 맞대기 용접을 실시 하였고, I-그루브 맞대기 용접에서 사용한 조건들과 유사한 용접 전류, 용접 속도에서 안정적인 이면비드를 얻을 수 있었다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.2
• /
• pp.146-151
• /
• 1997

To get the basic information for the establishment of the optimum levels of upland soil fertility and fertilizer application, two hundred soil samples were collected from the major vegetable cultivation areas such as Chinese cabbage, reddish, garlic, onion, red pepper, watermelon and potato fields. The soil samples were analyzed for the soil chemical properties and micro elements. Soil pH, organic matter and magnesium contents were lower than the standard level for upland soil improvement, while the phosphate and potassium contents were higher than the standard levels. The organic matter and nitrogen contents were increased in the potato field soils, the available phosphate contents were increased in the red pepper field soils and the exchangeable potassium contents were increased in reddish and red pepper field soils, to compared with the past deta. The contents of micro elements were ranged in 14~282 for Fe, 13~98 for Mn, 0.5~2.8 for Cu and 0.6~5.0 mg/kg for Zn respectively, and they were in order of Fe>Mn>Zn>Cu.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.7 no.1
• /
• pp.33-37
• /
• 2011

The ectopic eruption is defined as abnormal eruption which gives to displacement of the teeth and abnormal root resorption of adjacent teeth. The prevalence of ectopic eruption is reported to vary 2~6%, most of them are in the maxilla. Etiologic factors include narrow maxilla, large maxillary teeth, inclined eruption path of the first molar, retruded position of the maxilla and hereditary factor. Irreversible ectopic eruption where the second primary molar is lost often causes mesial tipping and rotation of the permanent molar, unfavorable occlusion and space deficiency for the second premolar. Ectopically erupted teeth should be treated early to maintain normal development of the dentition, harmony of facial growth and occlusal support. The method of the treatment are classified as follows : appliances that is positioned at the contact point for unlocking and the distal movement, fixed appliance that is connected to more than one tooth, and occlusion guiding method after disking or extraction of the second deciduous molar. A case report of a patient with bilaterally ectopic eruption of maxilla and mandible first permanent molar was present. Also, the patient who had experienced the chronic myelogenous leukemia, show various dental developmental complications. The ectopic eruption was treated with a Halterman appliance that was a effective way of correcting of ectopic eruption of the permanent first molar.

• THE JOURNAL OF KOREAN ORIENTAL ONCOLOGY
• /
• v.9 no.1
• /
• pp.75-87
• /
• 2003

Recently, the occurrence and death rates of cancer have increased rapidly. Metastasis and recurrence is the most important factor of death from cancer. So inhibition of recurrence and metastasis can increase the cure rate of cancer disease. At the basic chinese traditional medicine(TCM), there are a lot of theory related to neoplasm treatment. The metastasis and recurrence of neoplasm was the basis of yudu(餘毒) on remained neoplasm cell and stagnation of blood, thermotoxo, phlegm, asthenia of healthy enerngy and stagnation of vital energy. The principles therapy of neoplasm on metastasis and recurrence was based on knowledge of the method of support the healthy energy and strengthen the body resistance, promote blood circulation to remove blood stasis, clear away heat and toxic materials, dissipate phlegm and disperse the accumulation of evils. But the major clinical features of neoplasm was to be considered in developing a treatment plan include (1) distinguish between clinical and pathologic staging - acute and chronic, (2) classification of pathologic pattern, and (3) distingction of body situation : for examples asthenia - sthenia etc. It was most important to distinguish between supporting the healthy and eliminating the evil factors and to treat differently at the root and the branch cause of a neoplasm. This paper's results indicate that identification and effective use of THM can inhibite netastasis and recurrence and then it will help increasing survival rate. Also as BioTechnology(BT) has developed rapidly nowadays, as genes related to cancer have revealed. So it will give rise to the development of searching the mechanism of herb medicines which have inhibition effects of metastasis and recurrence.

• Journal of The Korean Association of Information Education
• /
• v.13 no.3
• /
• pp.383-391
• /
• 2009

The goal of cyber teaching is to reduce the cost of private lessons, dissipate the educational disparity amongst regions, make classes apt to the given level of every group of students, make up for systematic defects of the public education, and ultimately strengthen its role. This study intends to analyze the capabilities of cyber teachers and clarify their qualifications, as the whole new e-Learning system is about to take root. In this study, the activities of cyber teachers are analyzed and some standards of applicability of cyber teachers, or the so-called ISSCT, are presented. Firstly, the activities are divided into teaching, counselling, process management, development of professionality. Based upon these four activities, nine tasks have been formed and the structure of 22 sub-tasks has been completed. This is the way the standards of applicability of cyber teachers are established in consideration with their activities. Secondly, the standards of information capability of cyber teachers have 53 elements in total, and the aforementioned ISSCT are presented in relation to the ISST, based upon the standards of information capability of cyber teachers.

• Journal of Korea Water Resources Association
• /
• v.51 no.11
• /
• pp.1021-1029
• /
• 2018

A primary objective of this study is to develop a drought forecasting technique based on groundwater which can be exploit for water supply under drought stress. For this purpose, we explored the lagged relationships between regionalized SGI (standardized groundwater level index) and SPI (standardized precipitation index) in view of the drought propagation. A regional prediction model was constructed using a NARX (nonlinear autoregressive exogenous) artificial neural network model which can effectively capture nonlinear relationships with the lagged independent variable. During the training phase, model performance in terms of correlation coefficient was found to be satisfactory with the correlation coefficient over 0.7. Moreover, the model performance was described by root mean squared error (RMSE). It can be concluded that the proposed approach is able to provide a reliable SGI forecasts along with rainfall forecasts provided by the Korea Meteorological Administration.

• Journal of Korean Society of Forest Science
• /
• v.88 no.4
• /
• pp.469-476
• /
• 1999

This study was carried out to investigate the growth and physiological response of shade intolerant and intermediate tree seedlings to enhanced UV-$B_{BE}$(biologically effective UV-B) radiation. The seedlings of Betula platyphylla var. japonica Hara(shade intolerant species) and Fraxinus rhynchophylla Hance(shade intermediate species) were treated with one of the three levels of UV-$B_{BE}$ dosages - ambient UV-$B_{BE}$, ambient+3.2, and ambient+$5.2\;KJ\;m^{-2}day^{-1}$) for 14 weeks in the field condition. Height and root collar diameter growth, leaf area, and biomass production of the seedlings of two species were reduced by enhanced UV-B radiation. Leaf stomatal resistance to water vapor of the F. rhynchophylla seedling was increased by the UV-B increment. The reductions in total chlorophyll and carotenoid were more apparent in the F. rhynchophylla than B. platyphylla seedling. There was no statistically significant changes in the concentration of UV-B absorbing compound($A_{300}$) in the leaves of the two species among the UV-B treatment. However the $A_{300}$ tented to be increased in F. rhynchophylla by enhanced UV-B radiation. These results indicate that the growth and the physiological and biochemical responses between B. platyphylla and F. rhynchophylla were different to enhanced UV-B environment.