• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.6
• /
• pp.81-89
• /
• 2009

Dancer systems are typical equipment for attenuation of tension disturbances. Lately, demands for high speed roll-to-roll machines are rising but it is prior to attenuate the tension variation on the web entering into the printing zone to achieve the speed increment. Maintaining a constant tension before the first printing cylinder is the key of high speed, high quality printing. Dancer has been researched in two ways, whether it is controlled or not. The first one is active dancer and the other one is passive dancer. In the active dancer, a position of idle roll of dancer is measured and the roll is moved by external hydraulic cylinder to control tension disturbances. While the passive one composed with spring, damper and idle roll has no external actuator to position the idle roll. The tension disturbance causes movement of dancer roll and the displacement of the roll regulates the tension variation. On the other hand a composite type of dancer is applied for roll-to-roll printing machines. It has same apparatus as passive dancer. The displacement of roll is measured and front(or rear) driven roller is controlled to position the roll. In this paper, it is presented an analysis of pendulum dancer including position feedback PI control and logic for PI gain tuning in roll-to-roll machines. Pole-zero map and root locus with varying system parameters gives a design method for control of the dancer.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.4
• /
• pp.129-135
• /
• 2009

In this paper, a finite element model is presented for the prediction of roll force and strip thickness in a backup-roll-drive mill. The proposed FE model is focused mainly on analyzing the elastic/plastic behavior between a work roll and a strip as well as the rigid/plastic behavior between a backup roll and a work roll. The capability of the proposed model is demonstrated through application to 4-high silicon steel rolling mill at POSCO. Results show that the predicted roll force and strip thickness rolled accurately agree with the measured them. It is also illustrated that the proper position of work roll displaced to one side from the vertical centerline of the backup-roll may be determined by minimizing the horizontal force of work roll.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.248-251
• /
• 2009

AB100 & CB100 are general products in the steel beam of the section shape. They are applied for construction, welding and shipbuilding structures. But currently roll damages are generated in the intermediate & finish mills during producing AB 100, CB100. The goal of this project is to conduct rolling & roll stress analysis using the 3D FEM program and to research the things which roll diameter affects roll stress. By the analysis results, it is determined that the recording roll stress where the roll diameter will be big comes to be small, and it is recognized that roll damage occurrences of finish rolling mills can be high by roll stress analysis results.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.2
• /
• pp.400-408
• /
• 1992

In this paper, analysis of temperature and stress distributions in the roll for a twin roll continuous casting process was carried out. Firstly, several state equations were set up to determine the temperature distribution in the roll using finite difference method. Secondly, thermal stress in the roll was calculated numerically. Also, stress distribution due to the roll pressure was calculated to determine the effect of the roll pressure. For analysis of temperature distributions and the stress states of the roll, there are three kinds of roll materials, 2ICrMoV5. 11, CuCo/NiBe, CuCrZr and three types of cooling system were used.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.308-312
• /
• 1999

Developed the model equations which calculate roll force, roll power during hot rolling in real time. The variables which mainly effect on the roll force, roll power are shape factor, reduction, roll diameter, roll velocity, strip inlet temperature, carbon content of strip and strip-roll contact friction coefficient. Among these variables roll diameter, roll velocity, inlet temperature, carbon content and friction coefficient can be excluded in interpolated model equation by introducing equation of die force(F'), power(p') of the frictionless uniform plane strain compression which can be calculated without iteration. At the case of coulomb friction coefficient of 0.3, we evaluated coefficient of polynomial equations of {{{{ { F} over {F' } }}}}, {{{{ { Pf} over {Pd }, { Pd} over {P' } }}}} from the result of finite element analysis using interpolation. It was found that the change of values of {{{{ { F} over {F' }, { P} over {P' } }}}} with the friction coefficient tend to straight line which slope depend only on shape factor. With these properties, developed model equations could be extended to other values of coulomb friction coefficient. To verify developed roll force, roll power model equation we compared the results from these model equation with the results from these model equation with the results from finite element analysis in factory process condition.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.11
• /
• pp.1742-1748
• /
• 2014

This study investigated the quality characteristics of commercial rice flour (CRF) and rice flours prepared by different milling methods for sulgidduk. For particle distribution, dried rice flour after the 1st roll mill using a pin mill showed a particle size of greater than $710{\mu}m$, whereas a particle size less than $250{\mu}m$ accounted for 48% of whole rice flour. This proportion was higher than CRF after the 2nd step roll mill. Crude protein, lipid, and ash contents were significantly highest in 1st roll mill samples. For color, roll & pin made up of many small particles showed a high L value. CRF and roll & pin showed significantly higher starch damage and water-holding capacity, whereas pasting temperature, peak viscosity, and setback of RVA pasting characteristics were lower than 1st roll mill. When rice cakes were made from three kinds of rice flour, roll & pin was not significantly different compared to the CRF. However, rice cakes made with 1st roll milled rice flour showed rough crumb and crust. Rice cake made with roll & pin or CRF showed similar characteristics for texture. In the quantitative descriptive analysis, rice cake made with roll & pin showed better appearance, flavor, taste, texture, and overall acceptability than CRF and 1st roll mill. Therefore, rice flour prepared by roll & pin could be applied to sulgidduk with high quality.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.3
• /
• pp.73-81
• /
• 1995

To find a way for establishing work roll initial crown according to roll conditions, computer simutation for predicting plate crown in plate mill is done and effects of roll conditions on plate crown is analyzed. Toll gap rorfile and plate crown are measured to be compared to the calculated values. As a result, regression equation to establish work roll initial crown according to roll conditions such as backup roll diameter, backup roll crown and work roll diameter is obtained.

• Laser Solutions
• /
• v.16 no.4
• /
• pp.17-23
• /
• 2013

The research for the development of roll-to-roll printing process is actively underway on behalf of the existing semiconductor process. The roll-to-roll printing system can make the electronic devices to low-cost mass production. This study is performed for developing the manufacturing technology of the printing roll used in the printing process of electronic devices. The indirect laser engraving technology is used to create printable roll and the printable roll is made out of the chrome coated roll after coating copper and polymer on the surface of steel roll, ablating the polymer on the surface of roll and etching the roll. The 3 dimensional laser scanner and roll rotating systems are constructed and the system control program is developed. We have used the fiber laser of 100 W grade, the 3 dimensional laser scanner and the 3 axes moving stage system with a rotating axis. We have found the optimal conditions by performing the laser patterning experiments and can make the minimum line width of $24{\mu}m$ by using the developed 3 dimensional laser scanner system.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.2
• /
• pp.45-52
• /
• 1998

The contact roll is often used to regulate the winding tension as well as the entrained air in a wound roll by adjusting the contact force to the winding roll. But the contact force generated by other rolls, like assistant nip rolls, in a winding(or roll changing) process may act as disturbance to the control of the winding tension. In this paper, the mechanism of a roll change process is analysed. Ana, the behavior of the contact and the nip rolls are mathematically modeled. A nonlinear PID(NPID) controller is designed to control the winding tension and to reject the effect of disturbance generated by the nip roll on the winding tension variation. Computer simulation study showed that the performance of the suggested NPID controller is improved compared with that of the PID controller in controlling the winding tension and in rejecting the effect of the disturbance.

• Transactions of Materials Processing
• /
• v.6 no.2
• /
• pp.95-101
• /
• 1997

The thermal fatigue and wear properties of high speed steel roll which was recently developed were investigated by observing microstructure, by measuring mechanical and physical properties, by conducting thermal fatigue testing, and by measuring the amount of wear in actual mill. High speed steel roll had better thermal fatigue testing, and by measuring the amount of wear in actual mill. High speed steel roll had better thermal fatigue life than high chromium iron roll, which was due to lower carbide content, higher strength, and higher thermal conductivity. The amount of wear of high speed steel roll was nearly the same as that of high chromium iron roll in the first finishing stand, which was due to the oxide formation on the roll surface. However, in the third finishing stand, the wear resistance of high speed steel roll was 2~3 times as good as that of high chromium iron roll because the former had higher hardness at high temperature.