• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7C
• /
• pp.678-687
• /
• 2003

8SQAM(8-state Superposed Quadrature Amplitude Modulation) being a new modem technique for use in power and bandwidth limited digital communication system generates output signals which have a mか and continuous phase transition and a reduced envelope fluctuation by keeping correlation between amplitudes and phases of two subsequent symbols. Also, 8SQAM signal is free of inter-symbol interference(ISI), and has a compact power spectrum. Accordingly 8SQAM, as compared with a conventional 8PSK, is influenced a little by inter-modulation(IM), inter-symbol interference(ISI) and adjacent channel interference(ACI) in a nonlinearly amplified multi-channel(SCPC-FDMA) environment. In this paper, the performance of 8SQAM system in a nonlinearly amplified multi-channel interference environment is analyzed via computer simulation The simulation result shows that 8SQAM outperforms 8PSK with roll-off value of $\alpha$ = 0.3 by 2.7dB in CNR to maintain BER=1$\times$10$^{-4}$ when input back-off(IBO) of HPA is 1dB and channel space is 41.7% of the data bit rate(i.e., spectral efficiency = 2.40b/s/Hz).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7C
• /
• pp.669-677
• /
• 2003

A new Modem technique - 8SQAM(8-state Superposed Quadrature Amplitude Modulation) - for use in power and bandwidth limited digital communication system is proposed. 8SQAM is free of inter-symbol interference(ISI) and generates output signals which have a smooth and continuous phase transition and a reduced envelope fluctuation by keeping correlation between amplitudes and phases of two subsequent symbols. Accordingly, 8SQAM, as compared with a conventional 8PSK, is influenced a little by ISI and inter-modulation(IM) caused by nonlinear distortions. In this paper, the performance of the 8SQAM system, in a nonlinearly amplified channel impaired by additive white Gaussian noise(AWGN), ISI and IM, is analyzed via computer simulation. The simulation result shows that 8SQAM outperforms 8PSK with roll-off value of $\alpha$=0.25 by 2.5dB in CNR to maintain BER=1$\times$10$^{-4}$ when input back-off(IBO) of HPA is 3dB.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.4
• /
• pp.307-315
• /
• 1989

In this paper, we have analyzed the temperature variation trend of a slab on between the process of reheating furnace and the termination of roughing mill process during hot rolling process. 1) cooling by radiation and convection current in the air, 2) plastic deformation heat, 3) cooling by descaling water, 4) cooling by contact with rolling rolls and/or transmitting rolls. For the analysis, the factors have been adopted as the problems of the rolling process to be solved such that we have established an application technique in relation to the determination of boundary conditions on the slab surface. We have presented a procedure for an analysis of the cooling phenomenon treated as a problem of two-dimensional transient heat flow using finite difference equation and suggested techniques of implementing sequentialized rolling tasks in correlation with the procedure. From the result of simulation, it is shown that the difference between calculation value and measurement value is within the range of the industrial measurement error. Also, it is proved that the assumptions, conditions, and properties used in the computer simulation is appropriate by showing that the pattern of a drop in temperature at each rolling event is in accord with real circumstances.

• Ocean and Polar Research
• /
• v.42 no.1
• /
• pp.77-88
• /
• 2020

This paper presents the coordinate systems used for trawl doors modeling, and provides matrix equations of connection between these systems. The projections of the forces acting on the door into axes of various coordinate systems were obtained, which were used in the door equilibrium equations. Six equilibrium conditions for the door as a solid were obtained: formulas that allow for the door area in plan to be determined; its weight in water; its mass; three moment equations for determining the position of the warp and backstrops fastening points to the door with triangular and quadrangular backstrop arrangements. It was found that the moment equilibrium equations of trawl doors are generally incompatible, which was not found by any of the authors who have previously conducted research into trawl doors. Using the Kronecker-Capelli theorem, the compatibility equation is obtained. This equation includes the coordinates of the backstrop fastening points to the door, which means that these points cannot be randomly selected. The technique of determining the warp and backstrops' fastening points position to the door is described. Conditions of directional (by angle of attack) and roll (in angle of roll) stability of the doors' equilibrium are presented. The equations presented in this paper comprise a mathematical model that allows, when designing the doors, to select optimal parameters, as well as to carry out adjustments for trawling purposes to ensure the stable movement of the doors and the entire trawl system.

• Applied Biological Chemistry
• /
• v.28 no.2
• /
• pp.98-105
• /
• 1985

In the sheep and cattle's rumen, facultative anaerobic cellulolytic bacteria were isolated by using Hungate's roll tube technique. In the 21 isolated species, one was screened by its strong cellulolytic activity and identified as Cellulomonas fimi C-14 by investigate morphological, cultural, physiological characteristics and electron microgram. Optimum conditions of the cell growth and enzyme production were pH 6.5 an $30^{\circ}C$, Thiamine and biotin support a good growth of C. fimi C-14. In the enzyme activities, Crystalline cellulose hydrolyzing activity, CMCase activity and ${\beta}-glucosidase$ activity were 20.6, 226.6 and 0.56$(unit{\times}10^3/ml)$ at pH 6.0, $40^{\circ}C$. By addition of fungal cellulase, enzyme activity was increased. Simultaneous Saccharification Fermentation is better than two step fermentation in ethanol yield with Saccharomyces cerevisiae DY2.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.7
• /
• pp.157-163
• /
• 2011

In this paper, configuration control for the Horizontal Maintenance and driving of the mobile inverted pendulum robot has been studied using ARS(Attitude Refrence System). The inverted pendulum technique is getting attention and there have been many researches on the seg-way since the US. Using its 2 freedom, a mobile inverted pendulum robot can move in various modes and Our robot performs goal reaching ARS. Mobile inverted pendulum robot fall down to the forward or reverse direction to converge to the stable point. Kalman Filter is normally used for the algorithm and numerous research is progressing at the moment. To calculate the attitude in ARS using 2 axis gyro(roll, pitch) and 3 axis accelerometers (x, y, z). In this paper we present a two wheel robot system for an autonomous mobile robot. This paper realized the robot control method which is much simpler but able to get desired performance by using the IMU and PID control.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.1
• /
• pp.66-77
• /
• 2003

The purpose of this study is to propose a standard putting green management program to prepare fast green suitable for international golf tournaments, and to conform whether the reported green speed model can be applied to the real field situations. The west course of Lakeside Country Club was selected for the case study. This study was initiated on August 1st, 2001 and continued through October 4th, 2001. The results are summarized as follows: 1. Following the long-term schedule, 'penncross' creeping bentgrass turf was mowed at 5.0mm(37days), 4.5mm(8days), 4.0mm(4days), 3.5mm(2days), 3.2mm(2days), 3.0mm(2days), 2.8mm(2days) and the mowing direction was changed daily. Variation of mowing height was reduced to a minimum range. Core aerification with deep tines was applied 19 days prior to the first practice round. Dry sand maintenance was top-dressed 2 times at 1.5mm/$m^2$ on the 17th day and 1.0mm/$m^2$ on the 10th day. Minimum irrigation was applied to keep the turf alive. During the tournament preparation week, dew on the putting greens was removed by using a sponge roller. Following the dew removal, the greens were cut once each morning at a height of 2.8mm. The mower used was the 21 inch working behind mower equipped with a tournament bedknife and 11 reel blades. Following the mowing, the peens were rolled with a light-weight roller in one direction in the morning. Rolling was used as a finishing technique to ensure that the surface was as smooth as possible, and to provide true ball roll and maximum green speed. In conclusion these management practices satisfied the daily green stimpmeter readings required for USGA championship play. 2. During the period of tournament preparation, no damage was observed on the green, but scalping in green edge appeared in about 0.39% of the total area of 18 greens in the west course.

• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.1143-1151
• /
• 2019

In this paper, we propose a wireless transmission scheme that maximizes transmission efficiency per frequency bandwidth in a single carrier modulation scheme. The proposed scheme employs a decision directed channel tracking technique to remove both pilot signal and the guard interval signal between symbols in frames. It performs a raised cosine pulse shaping function with an roll-off factor of 0.05. In addition, 2×2 multiple input and multiple output using two polarized antennas is applied and both equalization and signal separation are performed in the frequency domain. The wireless modem with this technology confirms that the transmission speed of up to 63.3Mbps is achieved under the 5MHz frequency bandwidth

• Journal of Korea Foundry Society
• /
• v.17 no.6
• /
• pp.577-584
• /
• 1997

Evaluation of rolling contact fatigue damage as well as material development for roll of rolling mill is being studied until quite recently. In this paper, a focus has been imposed on evaluating the rolling contact fatigue damage. In order for this, the accumulating process of rolling contact damage using the ferritic, pearlitic and bainitic DCI has been analyzed by X-ray diffraction technique. The main finds are; 1) The graphite in DCI is considered to be a cause of interfering in the redistribution of stress. Eventually, it results in the branching of crack. 2) The evaluation of rolling contact fatigue damage can be estimated in terms of the change of residual stress and/or a half-value breadth on surface during rolling contact.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.319-323
• /
• 1996

A new steel-making process, strip-casting, is introduced. The strip-casting is a new technique making the thin steel strip from the molten steel directly without resorting to repetitive reheating and hot-rolling required in a conventional steel-making method. This paper derives the mathematical model of strip caster, proposes a control strategy for stable startup operation and a fuzzy decision making rule for automatic control mode change in strip-casting process.