• 자원환경지질
• /
• 제5권1호
• /
• pp.1-20
• /
• 1972

A large anorthositic mass outcropped as mushroom-like body extending up to 46km which occurs in the Hadong kaoline district of southern Korea. The anorthositic mass is in contact with the metamorphic, plutonic and sedimentary rocks. The metamorphic rocks are of granitic gneiss and banded gneiss, etc; the plutonic rocks are of gabbroic and dioritic rocks, schistose granite, syenite, diorite and granite. The sedimentary rocks include siltstone and pebbly sandstone of Lower Gyeongsang System, Cretaceous in age. The anorthositic mass shows a gradational contact with the metamorphic and sedimentary rocks, and is cut by the plutonic rocks except gabbroic and dioritic rocks. The anorthositic mass is leucocratic in the central portion of the mass, and, in turn, grades to rock phases in which ma/ic minerals are irregularly scattered, then to the well-lineated rock and finally to the banded gneiss. Lineation of the anorthositic mass is accordant with that of the surrounding banded gneiss, and the lineation continues toward the gneiss. In some places, the rock phases in which mafics are scattered is gradational with adjacent sedimentary rocks. The anorthositic mass in contact with gabbroic and dioritic rocks shows spotted features. Various replacement features seen under the microscope and paragenetic sequence of the mineral components in the anorthositic rocks cannot be considered as the origin of magmatic crystallization. From the field and microscopic observations, it is concluded that the anorthositic mass was formed from replacement of the metamorphic rocks and plutonic rocks by the anorthositic magma.

• 자원환경지질
• /
• 제26권1호
• /
• pp.67-81
• /
• 1993

This dissertation is a basic research on the degradation of rocks and aims at clarifying the relations between the progression of degree of weathering and the variation of chemical composition. The author wants to make clear the degradation of rocks and the process of formation of sedimentary rocks from a standpoint of elucidation of migration of elements. This study is considered to be significant not only as a part of research on the distribution of earth crust materials but as the petrogenesis of rocks. The chemical studies on the weathered rocks have been started relatively early and there are not a few researches on them: Goldich, 1938; Harris, et al., 1966; Ruxton, 1968; Berner, et al., 1982; Kanuss, 1983; Lasaga, 1984; Siagel, 1984. The degree of migration of elements in weathering is the composite result of various factors. Because, at the present time, it is difficult to clarify the individual and composite effects of each factor theoretically and quanititatively, we must accumulate empirical data and use them relatively. In such consideration the author acquired some data of chemical weathering from the chemical analysis of granitic and basaltic rocks in and around Fukuoka city, Japan and granitic rocks in and around Chonju and Iri cities, Korea. Because both rock types studied can be considered as representative materials of acidic and basic rocks compsing the earth crust, it is significant to examine the phenomena of weathering of both rock types. The following results are obtained from the analysis and examinations of chemical compositions of the original and weathered rocks. The loss rate of major elements has no uniformity, but the following relation holds in general; Ca, Na> K, Si> Mg> Fe, Al. As weathering proceeds, the ratio of $Al_2O_3/CaO$ shows increasing phenomena, and that of $Na_2O/CaO$ decreasing. The range of migration of composition is broad in basaltic rocks but narrow in granitic rocks. The reason is that the chemical weathering of basaltic rocks progresses more easily than that of granitic rocks. The chemical weathering potenitial index of basaltic rocks in larger than that of granitic rocks. The reason is that the chemical weathering of basaltic rocks proceeds more easily than that of granitic rocks. In weathering, the decrease of mobile cations such as $Ca^{2+}$, $Na^{2+}$, $Mg^{2+}$ and the increase of $H_2O$ in basaltic rocks are more obvious than in granitic rocks.

• Geomechanics and Engineering
• /
• 제17권6호
• /
• pp.527-534
• /
• 2019

There have been developed a number of methods to assess the abrasivity of rock materials with the increased use of mechanized rock excavation. These methods range from determination of abrasive and hard mineral content using petrographic thin section analysis to weight loss or development of wear flat on a specified cutting tool. The Cerchar abrasivity index (CAI) test has been widely accepted for the assessment of rock abrasiveness. This test has been considered to provide a reliable indication of rock abrasiveness for isotropic rocks. However, a great amount of rocks in nature are anisotropic. Hence, viability assessment of Cerchar abrasivity test for the anisotropic rocks is investigated in this research. The relationship between CAI value and quartz content for the isotropic rocks is well known in literature. However, a correlation between EQ, F-Schimazek value, Rock Abrasivity Index (RAI) and CAI of anisotropic rocks such as phyllite was done first time in literature with this research. The results obtained with this research show F-Schimazek values and RAI values should be considered when determination of the abrasivity of anisotropic rocks instead of just using Cerchar scratch test.

• 자원환경지질
• /
• 제9권1호
• /
• pp.13-26
• /
• 1976

The basic rocks distributed in the Okchon paleogeosynclinal zone have been previously considered as intrusive in majority, but as sedimentary parensis in few variety. The present study is to find out some clues to conclude otherwise, if any, by clarifying 1) the nature and characteristics of the rocks, 2) type of the associated sedimentary rocks if any, and 3) their occurrence in related to regional geologic structure. The finding are as follows: 1) The basic rocks are identified and classified to hornblende gabbro, amphibolite, basalt and andesite (in part metamorphosed to meta-volcanics), green schist and peridotite(which appears in separate locality from the others). 2) Associated sedimentary rocks which appear to overlie the basic rocks are known as Kunjasan and Baekwhasan formations. The two formations are probably same, but been used differently by different authers at different localities. The rocks is exclusively consisted of cherty looking siliceous quartzite and some localitis it shows very calcarious nature. The formation seems to indicate a sort of pelagic siliceous sediments although it contain some pebbles. 3) The basic rock suites are always underlain by the same continuous, great thrust, which separates the Okchon paleogeosyncline zone from the neogeosynclinal zone in the area studied. The comparison of Okchon basic rocks suite to the ophiolite suites in other parts of the world indicates some similarity with which the writers suggested the probalility of Okchon basic rocks being ophiolites that occur along ancient geosuture line now represented by the great thrust.

• Geomechanics and Engineering
• /
• 제14권4호
• /
• pp.399-406
• /
• 2018

The influences of mineral content and porosity on ultrasonic wave velocity were assessed for ten hornfelsic rocks collected from southern and western parts of the city of Hamedan, western Iran. Selected rock samples were subjected to mineralogical, physical, and index laboratory tests. The tested rocks contain quartz, feldspar, biotite, muscovite, garnet, sillimanite, kyanite, staurolite, graphite and other fine grained cryptocrystalline matrix materials. The values of dry unit weight of the rocks were high, but the values of porosity and water absorption were low. In the rocks, the values of dry unit weight are related to the presence of dense minerals such as garnet so not affected by porosity. The statistical relationships between mineral content, porosity and ultrasonic wave velocity indicated that the porosity is the most important factor influencing ultrasonic wave velocity of the studied rocks. The values of P-wave velocity of the rocks range from moderate to very high. Empirical equations, relevant to different parameters of the rocks, were proposed to determine the rocks' essential characteristics such as primary and secondary wave velocities. Quality indexes (IQ) of the studied samples were determined based on P-wave velocities of them and their composing minerals and the samples were classified as non-fissured to moderately fissured rocks. Also, all tested samples are classified as slightly fissured rocks according to the ratio of S-wave to P-wave velocities.

• Geomechanics and Engineering
• /
• 제13권3호
• /
• pp.371-384
• /
• 2017

Physical and mechanical properties of rocks are of interest in many fields, including materials science, petrophysics, geophysics and geotechnical engineering. Uniaxial compressive strength UCS is one of the key mechanical properties, while density and porosity are important physical parameters for the characterization of rocks. The economic interest of carbonate rocks is very important in chemical or biological procedures and in the field of construction. Carbonate rocks exploitation depends on their quality and their physical, chemical and geotechnical characteristics. A fast, economic and reliable technique would be an evolutionary advance in the exploration of carbonate rocks. This paper discusses the ability of ultrasonic wave velocity to evaluate some mechanical and physical parameters within carbonate rocks (collected from different regions within Tunisia). The ultrasonic technique was used to establish empirical correlations allowing the estimation of UCS values, the density and the porosity of carbonate rocks. The results illustrated the behavior of ultrasonic pulse velocity as a function of the applied stress. The main output of the work is the confirmation that ultrasonic velocity can be effectively used as a simple and economical non-destructive method for a preliminary prediction of mechanical behavior and physical properties of rocks.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 암반역학위원회 학술세미나 논문집
• /
• pp.31-50
• /
• 2002

The sedimentary rocks deposited in Taegu and Kyongbuk region consist of various rocks such as the shale, mudstone, siltstone and sandstone. The characteristics of the sedimentary rocks are distinguished from those of igneous rocks and metamorphy rocks for the stratum caused by deposit environment. This study investigated engineering characteristics of the anisotropy, weathering rock and filled rock joints in the notable features of sedimentary rocks.

• 자원환경지질
• /
• 제28권4호
• /
• pp.369-379
• /
• 1995

About forty ore deposits of $CaF_2{\pm}Au{\pm}Ag{\pm}Cu{\pm}Pb{\pm}Zn$ are widely distributed in the Geumsan district and are believed to be genetically related to the Mesozoic Geumsan granitic rocks. Based on their petrogeochemistry and isotopic dating data, the granitic rocks in this district can be classified into two groups ; the Jurassic granitic rocks(equigranular leucocratic granite, porphyritic biotite granite, porphyritic pink-feldspar granite, seriate leucocratic granite) and the Cretaceous granitic rocks(seriate pink-feldspar granite, equigranular alkali-feldspar granite, equigranular pink-feldspar granite, miarolitic pink-feldspar granite, equigranular biotite granite). Spatial distribution of fluorite ore deposits, fluorine contents of granitic rocks and fracture patterns in this district suggest that three granitic rocks(equigranular biotite granite, equigranular pink-feldspar granite, miarolitic pink-feldspar granite) of the Cretaceous period be genetically related to the fluorite mineralization. In these fluorite-related granitic rocks, fluorine is most highly correlated with Cs(correlation coefficient(r)>0.9), and also highly with MnO, U, Sm, Yb, Lu, Zn, Y, Li(r>0.7). Statistically the variation of fluorine in the fluorite-related granitic rocks can be explained in terros of only three elements, such as Lu, CaO and Cs, and the fluorite-related granitic rocks can be discriminated from the fluorite-nonrelated granitic rocks by a linear functional equation of La, Ce, Cs and F($Z_{Ust}=-1.38341-0.00231F-0.19878Ce+0.38169La+0.54720Cs$). Also, equigranular alkali-feldspar granite is classified into the fluorite-related granitic rocks by means of the linear functional equation($Z_{Ust}$).

• 한국광물학회지
• /
• 제4권2호
• /
• pp.69-89
• /
• 1991

The anorthositic rocks and the many other plutons which are of different varieties and age were distributed in the northern extremity of the distributed areas of H-S anorthositic rocks. The purpose of this study was to find plutons which had comagmatic relationships, and to make clear the magmatic process of anorthositic magma. The plutons were classified, and the petrological and the geochemical characteristics of the plutons were compared and researched in this study. And, because, like anorthosite, the rocks which intrude in the deep crust accompany assimilation, an AFC model calculation was performed to make the differentiation process of the anorthositic rocks clear. The plutons in this area were classified into three groups, and the three groups were composed of the Precambrian anorthositic rocks and related rocks, the Jurassic gabbro, and the plutons of undnown age. The anorthositic magma was differentiated from the anorthositic rocks through the tonalite to the alkali-feldspar granite, and it was differentiated under K, Mg, Fe free/lack condition. It was found from the result of AFC model that the anorthositic rocks were differentiated by fractional crystallization, but they were assimilated with wall-rocks, and the assimilation was performed at the rate of r$\leq$0.1. The plutons which intruded the anorthositic rocks subsequently consisted of the gabbro, the megacrystic granite, the fine-grained granite, and the gneissose granite. But they were formed by the repeated intrusion of magma, which may, or may not, be of the same origin. According to the result of the RCF model, these plutons were differentiated by simple fractional crystallization, and they were assimilated relatively less than the anorthositic rocks.

• 자원환경지질
• /
• 제27권4호
• /
• pp.411-420
• /
• 1994

Euiseong sub-basin, one of three sub-basins in Kyungsang basin, consists of various sedimentary and igneous rocks of Cretaceous age. Kusandong tuff and Yucheon volcanic rocks from the sub-basin were collected for the anisotropy of magnetic susceptibility (AMS) study. Maximum directions of the AMS for Kusandong tuff and Yucheon volcanic rocks are used to detect possible source areas. Although the dispersion of the maximum directions of the AMS, mainly due to low susceptibility and/or low percent anisotropy of individual specimens, is rather large, it is possible to reveal several source areas for the volcanic rocks. Areas near the Keumseongsan and Hwasan, calderas in the study area, are identified as source areas for Yucheon volcanic rocks, while the western part of Sunamsan, another collapsed caldera in Euiseong sub-basin, is inferred to be the source area for Kusandong tuff. However, it is not possible to determine detailed source areas for groups of Yucheon volcanic rocks of different lithologies, because of poor degree of convergence of the maximum directions of the AMS results from the volcanic rocks. It is also concluded that several episodic volcanic activities centered at Keumseongsan and Hwasan calderas were responsible for the formation of Yucheon volcanic rocks in Euseong area.