• 제목/요약/키워드: rockfalls

검색결과 15건 처리시간 0.026초

울릉도 화산암류의 낙석 규모 및 거동 분석 (Analysis of Magnitude and Behavior of Rockfall for Volcanic Rocks in Ulleung-Do)

  • 문기봉;유영민;윤현석;서영호;서용석;백용
    • 지질공학
    • /
    • 제24권3호
    • /
    • pp.373-381
    • /
    • 2014
  • 낙석은 형상, 체적 및 중량 등 그 규모를 예측하기 어렵고 비탈면의 높이 및 경사 등 기하학적 형상 등에 따라 불규칙적인 거동을 보인다. 본 연구에서는 해안도로를 따라 낙석이 빈번하게 발생하는 울릉도의 비탈면을 대상으로 현장조사를 수행하여 낙석의 유형을 분류하고 규모를 산정하였다. 또한 시뮬레이션 기법을 적용하여 도로에 영향을 미치는 낙석의 거동을 분석하였다. 연구지역에 분포하는 집괴암과 조면암질암은 각각 탈락형과 박리형의 낙석 유형를 보이며, 낙석의 규모는 조면암질암이 집괴암에 비해 상대적으로 2~3배 크게 분포하는 것으로 나타났다. 시뮬레이션을 이용한 낙석의 거동을 분석한 결과, 도로에 작용하는 충격 에너지가 표준 낙석방지울타리의 흡수 가능 운동에너지의 범위를 초과하여 고강도특수망을 적용할 경우 안정성이 확보되는 것으로 나타났다.

천연기념물 포항 달전리 주상절리의 낙석 발생원인 (Cause of Rockfall at Natural Monument Pohang Daljeon-ri Columnar Joint)

  • 김재환;공달용
    • 자원환경지질
    • /
    • 제55권5호
    • /
    • pp.497-510
    • /
    • 2022
  • 포항 달전리 주상절리(천연기념물 제415호)에서 발생하고 있는 낙석의 원인을 파악하기 위해 2018년 1월부터 2022년 8월까지 월별 모니터링과 3차원 스캔 측량, 전기 비저항탐사를 실시하였다. 약 5년간 주상절리대에서 떨어져 나온 낙석은 총 3,231개이며, 낙석의 크기(길이)는 20cm 이하가 1,521개(47%)로 가장 많고, 20~30cm는 978(30.3%), 30cm 이상은 732개(22.7%)가 발생하였다. 2018년부터 연도별 낙석 발생 개수는 감소하는 반면, 30cm 이상의 낙석 발생 빈도는 증가하는 경향을 보인다. 대규모의 낙석은 해빙기(3월~4월)와 장마기(6월~7월)에 주로 발생하였으며, 누적강우량과 낙석 발생 관계 분석에서 3~4일 간의 누적강우량도 낙석 발생에 밀접한 관계가 있는 것으로 나타났다. 주상절리 내의 사면물질(충진물)을 대상으로 한 XRD 분석에서 팽창성 점토광물인 스멕타이트와 일라이트가 관찰되었으며 전기비저항탐사에서 단층파쇄대가 존재하는 것이 확인되었다. 또한, 확인된 단층파쇄대와 3D 정밀측정을 통해 분석된 최대 침식지점이 무인카메라에서 관찰된 주 낙석 발생 지점과 일치하였다. 따라서 포항 달전리 주상절리의 낙석 발생 주요 원인은 내부요인(단층파쇄대와 절리의 발달, 암석의 풍화, 팽창성 점토광물의 존재)과 외부요인(강우량, 해빙기 급속한 융해현상)이 복합적으로 작용하여 대규모 낙석을 발생하는 것으로 판단된다. 반면, 일부에서 지속적으로 제기 되었던 포항-경주 지진은 주요 원인이 아님이 확인되었다.

고장력 경강선을 적용한 낙석방지울타리의 성능 및 경제성 평가 (Assessment of Performance and Cost-Effectiveness for the Rockfall Protection Fence Using a High Carbon Steel Wire Rod)

  • 이용주;나승민;황영철;유병옥
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2008년도 추계 학술발표회
    • /
    • pp.910-920
    • /
    • 2008
  • In Korea, more than 70% of the territory consists of mountains. Therefore, the construction of roads and railways has generally involved with a steep rock slope in which the event of rockfalls are often occurred due to the weathered rock conditions and rainfalls etc. This is dangerous when the rock falls into the road and railway on which vehicles and trains are running. In order to prevent such rockfalls, the rockfall protection fence consisting of post, wire rope, and PVC coating steel net has most used at the bottom of rock slopes. In a general practice, an absorbing rockfall energy, 50kJ is specified by the Ministry of Construction and Transportation. However, questions still remain about whether the rockfall protection fence works effectively or not. In this study, a typical wire rope used in the standard rockfall protection fence was replaced by the high carbon steel wire rod and to validate its capacity of rockfall energy absorbing the field rockfall tests were conducted. The testing results show that a new rockfall protection fence using the high carbon steel wire rods can absorb the rockfall energy more than 50kJ and 20% of construction cost was saved in comparison with the previous rockfall protection fence.

  • PDF

Rockfall analysis using simulation techniques- A practical application to, the Mt. Namsan Gyoungju in Korea

  • Lee, Jong-Yoon;Park, Hyeong-Dong
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
    • /
    • pp.548-552
    • /
    • 2003
  • During the last few decades, the frequency and distribution of rockfalls have been increased in Korea due the development of rock slope in mountain areas. Although the scale of, falling block of rockfall was small, there were some casualties of lives and loss of properties. In order to reduce damage from rockfall, analysis on rock slope indanger of rockfall should be carried out. Thus, the simulation softwares for rockfall behavior analysis have been introduced. In this study, geotechnical investigation and input data for rockfall simulation are described with the comparison among four commercially available rockfall simulation softwares. Finally, rockfall simulation works are described by exmining a case of inaccessible rock-slope of potential rockfall in Korea.

  • PDF

제주 관광지의 낙석 방재에 대한연구 (The Study about Countermeasure against Rockfall in resort, Jeju island)

  • 이수곤;이경수;정상훈
    • 한국방재학회:학술대회논문집
    • /
    • 한국방재학회 2008년도 정기총회 및 학술발표대회
    • /
    • pp.565-568
    • /
    • 2008
  • 본 연구 지역은 제주도에 위치해 있으며 아름다운 경관으로 유명하여 매년 외국인을 포함한 많은 관광객들이 늘어나고 있는 추세이다. 그러나 지형, 지질적인 특징과 기후의 특성으로 인하여 낙석사고가 빈번하게 발생하여 이로 인한 인명 및 재산 피해가 항상 도사리고 있어 항구적인 대처가 필요하다. 그러므로 본 연구에서는 낙석붕괴 가능성을 분석하여 합리적인 피해 저감 대책 방안을 연구하였다.

  • PDF

Slope Movement Detection using Ubiquitous Sensor Network

  • Jung, Hoon;Kim, Jung-Yoon;Chang, Ki-Tae;Jung, Chun-Suk
    • Journal of Electrical Engineering and Technology
    • /
    • 제4권1호
    • /
    • pp.143-148
    • /
    • 2009
  • About 70% of Korea consists of mountainous areas, and during the construction of many roads and railroads, cut slopes are inevitably formed. The rainy season, frost heaving in winter, and thawing in spring can all cause rockfalls and landslides. The failure of these slopes is increasing every year, causing damage to vehicles, personal injury and even death. To protect people and property from such damage, a real-time monitoring system is needed to detect the early stages of slope failures. The GMG placed TRS sensor units in the slopes to monitor them in real-time. But due to its reliance on data lines and power lines, the system is vulnerable to lightning damage. The whole system can be damaged by a single lighting strike. Consequently, for the purposes of this paper we propose the use of the Ubiquitous Sensor Network (USN) which follows the IEEE 802.1.4. By using the USN system we can minimize lightning damage and can monitor the movement of the slopes consistently.

낙석방지울타리 망의 변위량 및 성능검증을 위한 실물낙석시험 (Field Test for Absorption Energy and Displacement of Rockfall Protection Net)

  • 서진혁;황영철
    • 한국지반환경공학회 논문집
    • /
    • 제21권12호
    • /
    • pp.17-21
    • /
    • 2020
  • 낙석방지울타리의 지지능력은 철망, 지주, 와이어로프의 성능을 합친 것으로 정의되며, 기존에 시공되고 있는 낙석방지울타리는 도로안전시설 설치 및 관리지침 중 낙석방지시설 편에는 48~61kJ의 에너지를 흡수할 수 있는 지주, 와이어로프, 철망의 규격이 제시되어 있다. 그러나 흡수에너지에 대한 각 요소들의 상관관계가 명확하게 제시되어 있지 않아 불확실하다(Ministry of Land, 2008). 본 논문에서는 수직 낙하시험을 이용하여 낙석방지울타리의 성능평가 시험을 수행하던 중 복잡한 꼬임으로 이루어져 체결 조건 등이 중요한 낙석방지망이 흡수하는 에너지를 확인하기 위해 실물낙석시험을 수행하였다. 시험결과를 이용하여 낙석방지망의 변위량 산정요소인 𝛿의 적절성을 판단하고 국외 성능평가 기준을 이용하여 낙석방지망의 흡수가능에너지를 평가하였다. 변위량 𝛿의 경우 명시되어 있는 1/4보다 1/2로 사용하는 것이 적합하다고 판단되며, 낙석방지망은 30kJ 정도의 에너지를 흡수한다는 결과를 도출하였다.

울릉도 북동부 지역의 낙석재해 위험도 평가 (Assessement of Rockfall Hazard in the Northeast Region of Ulleung-Do)

  • 서용석;장형수;김광염
    • 지질공학
    • /
    • 제22권3호
    • /
    • pp.353-363
    • /
    • 2012
  • 울릉도는 강도가 약한 화산암과 강도는 높으나 수직절리가 잘 발달하는 조면암질암으로 구성되어 있으며, 이러한 지질학적 특성으로 인해 낙석이 빈번하게 발생하고 있어 일주도로의 이용에 큰 위험요소로 작용하고 있다. 본 연구에서는 낙석 재해위험도가 높은 울릉도 북동부의 약 3 km 구간을 대상으로 3종류의 낙석재해 위험도 평가법을 이용하여 낙석재해 위험도 평가를 수행하고 재해도를 작성하였다. 사용된 평가표는 일본 도로방재 총점검에서 적용된 낙석위험도 조사표, 일본 고속도로조사회의 낙석위험도 평가표, 그리고 미국연방도로국의 RHRS (Rockfall Hazard Rating System)이다. 도로사면의 지형 지질학적 조건을 고려하여 27개 구간을 설정하여 평가한 결과, 20개 사면(약 74%)에서 낙석재해 위험도가 높음과 보통으로 평가되었다. 이러한 조사결과를 바탕으로 낙석재해 위험도를 작성하였다.

서비스업 활용을 위한 광산 폐갱도의 안정성 평가 (Stability Assessment of Abandoned Gangway for Commercial Utilization of Services)

  • 선우춘;정소걸;이윤수;강상수;강중석
    • 터널과지하공간
    • /
    • 제22권5호
    • /
    • pp.297-309
    • /
    • 2012
  • 서비스업 목적을 위한 폐갱도에 대한 안정성 평가가 수행되었다. 공동의 안정성에 영향을 주는 많은 요소들 중 주어진 암반내의 공동폭이 하나의 중요한 설계요소가 된다. 이 논문에서는 폐갱도의 안정성 평가를 위해 갱도의 크기에 대해 Lang이 제안한 한계 공동폭 기준, Mathews'stability graph method 그리고 수정 제안된 한계 공동폭 기준과 Q 시스템의 지보대책을 이용하여 안정성 평가를 실시하였다. 전체적으로 안정성평가에서 안정한 것으로 판단되지만, 저각의 수평절리가 나타나는 구간에서는 쐐기형 블록의 낙석 위험이 예상된다. 또한 상용목적으로 폐갱도를 활용할려면 구역에 따라서는 록볼트와 같은 지보대책이 필요하다. 출입구 구간은 불안정 구간으로 특히 주의가 필요한 구간이다. 과발파에 의한 갱도 천정 및 측벽에 많은 크고 작은 부석들이 존재하고 있어 부석들에 대한 제거작업이 선행되어야 한다.

Slope stabilization with high-performance steel wire meshes in combination with nails and anchors

  • Rudolf Ruegger;Daniel Flum
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2000년도 사면안정 학술발표회
    • /
    • pp.3-38
    • /
    • 2000
  • Slope draperies in soil and rock are a well known method to avoid rockfalls into the roads or onto housings. Common wire mesh or a combination of wire mesh and wire rope nets are pinned to the slope by the means of fully grouted nails or anchors. Most of these installations have not been designed to stabilize the slope, but simply avoid the rocks from bouncing. The combination of soil- or rocknailing with a designable flexible facing system offers the advantage of a longterm stabilization of slopes and can replace other standard methods for slope stabilization. The capability to transfer axial and shear loads from the flexible facing system to the anchor points is most decisive for the design of the stabilization system. But the transfer of forces by mesh as pure surface protection devices is limited on account of their tensile strength and above all also by the possible force transmission to the anchoring points. Strong wire rope nets increase the performance for slope stabilizations with greater distances between nails and anchors and are widely used in Europe. However, they are comparatively expensive in relation to the protected surface. Today, special processes enable the production of diagonally structured mesh from high-tensile steel wire. These mesh provide tensile strengths comparable to wire rope nets. The interaction of mesh and fastening to nail / anchor has been investigated in comprehensive laboratory tests. This also in an effort to find a suitable fastening plates which allows an optimal utilization of the strength of the mesh in tangential (slope-parallel) as well as in vertical direction (perpendicular to the slope). The trials also confirmed that these new mesh, in combination with suitable plates, enable substantial pretensioning of the system. Such pretensioning increases the efficiency of the protection system. This restricts deformations in the surface section of critical slopes which might otherwise cause slides and movements as a result of dilatation. Suitable dimensioning models permit to correctly dimension such systems. The new mesh with the adapted fastening elements have already been installed in first pilot projects in Switzerland and Germany and provide useful information on handling and effects.

  • PDF