• 터널과지하공간
• /
• 제3권1호
• /
• pp.54-62
• /
• 1993

In order to evaluate the necessity for the support during the excavation of the transport drift and use the data for design applications, laboratory testings of mechanical properties of rock samples and engineering rock mass classifications on this study site were performed. The values of RMR and Q-system are 68 and 11.8, respectively. Since these results were evaluated as good, this rock mass were determined to be unsupported. Full face excavation method was determined to be suitable for excavating this drift. In case of excavation, smooth blasting techniques must be carried out at the wall rock and the crown. However, considering the blast vibration etc. that have an effect on the surrounding rock mass, approximately less than 9kg of explosive charges per blast should be maintained.

• 대한토목학회논문집
• /
• 제31권4C호
• /
• pp.147-154
• /
• 2011

현재 NATM 터널의 설계 시 지반하중을 시공중에는 숏크리트, 강지보재 및 록볼트로 구성된 1차지보재가 부담하고, 장기적으로 1차지보재는 기능을 상실하고 2차지보재인 콘크리트라이닝이 부담하는 것으로 간주하는 것이 일반적이다. 그러나, 지반조건이 불량한 경우에 적용되는 강지보재는 숏크리트로 피복되어 있어 부식가능성이 작으므로 장기적으로 기능이 완전히 손실된다는 것은 지나치게 보수적인 개념이다. 숏크리트의 경우에도 장기적으로 열화가 진행되는 것은 사실이지만 하중지지 능력이 완전히 손실된다고 간주하는 것 역시 매우 보수적인 개념이다. 본 연구에서는 이론식 및 수치해석을 통하여 1차지보재가 장기적으로 지지할 수 있다고 판단되는 합리적인 지보압과 허용 이완하중고를 산정하였으며, 산정된 1차지보재의 지보압을 고려하였을 경우 콘크리트라이닝의 단면력 변화에 대하여 분석하였다. 검토 지반조건은 지하철 저토피터널을 대상으로 하였으며 주변 지반조건은 풍화암과 연암인 경우에 대하여 분석하였다. 검토결과 강지보재의 지보압을 고려할 경우 콘크리트라이닝의 경제적인 설계가 가능한 것으로 분석되었다.

• Geomechanics and Engineering
• /
• 제29권2호
• /
• pp.99-111
• /
• 2022

Instability of bolted rock mass has been a major hazard in the underground coal mining industry for decades. Developing effective support guidelines requires understanding of complex bolted rock mass failure mechanisms. In this study, the dynamic failure behavior, mechanical behavior, and energy evolution of a laboratory-scale bolted specimens is studied by conducting laboratory static-dynamic coupled loading tests. The results showed that: (1) Under static-dynamic coupled loading, the stress-strain curve of the bolted rock mass has a significant impact velocity (strain rate) correlation, and the stress-strain curve shows rebound characteristics after the peak; (2) There is a critical strain rate in a rock mass under static-dynamic coupled loading, and it decreases exponentially with increasing pre-static load level. Bolting can significantly improve the critical strain rate of a rock mass; (3) Compared with a no-bolt rock mass, the dissipation energy ratio of the bolted rock mass decreases exponentially with increasing pre-static load level, the ultimate dynamic impact energy and dissipation energy of the bolted rock mass increase significantly, and the increasing index of the ratio of dissipation energy increases linearly with the pre-static load; (4) Based on laboratory testing and on-site microseismic and stress monitoring, a design method is proposed for a roadway bolt support against dynamic load disturbance, which provides guidance for the design of deep underground roadway anchorage supports. The research results provide new ideas for explaining the failure behavior of anchorage supports and adopting reasonable design and construction practices.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.87-92
• /
• 2000

In excavation of tunnels especially located in shallow depth, it is not rare to meet geological change in excavation progress worse than expected in the initial design stage. This paper present a case study on the re-design of excavation and support system of a shallow tunnel under construction where it meets the unexpected bad geological condition during excavation. The detailed geological investigation shows that the rock mass is heavily weathered and fractured with RMR value less than 20. Considering this geological condition, the design concept is focused on the reinforcement of the ground preceding the excavation of tunnel. Two design patterns, LW-grouting & forepoling with pilot tunnelling method and the steel pipe reinforced grouting method, are suggested. Numerical analysis by FLAC shows that these two patterns give the tunnel and roof ground stable in excavation process while the original design causes severe failure zone around the tunnel and floor heaving. In point of the mechanical stability and the degree of construction, the steel pipe reinforced grouting technique proved to be good for the reinforcement of heavily fractured rock mass in tunnelling. This assessment and design process would be a guide in the construction of tunnels in heavily weathered and fractured rock mass situation.

• 한국철도학회논문집
• /
• 제12권1호
• /
• pp.31-38
• /
• 2009

국내에서 터널 설계시 암반의 물리적, 역학적 특성에 따라서 $5{\sim}6$개의 암반등급으로 분류한 후 터널의 용도 및 특성을 고려하여 지보시스템을 결정하게 된다. 그러나 이와 같은 방법은 암반의 특성이 균일하다는 가정을 하고 있으며 암반특성이 종 방향으로 변화될 경우 이에 대한 지보시스템의 친정이 달라져야 한다. 본 연구는 3차원 수치해석 프로그램(FLAC3D)을 이용하여 NATM 터널시공시 암반특성의 종방향 변화가 암반분류 및 지보시스템 결정에 미치는 영향을 파악하고자 총 14Case를 현장의 시공순서를 고려한 해석을 수행하였다. 암반특성의 종방향 변화시 전 후방 암반의 강성차이가 작은 경우에는 암반경계를 기준으로 0.5D내외, 강성차이가 큰 경우에는 1.0D 내외의 범위에서 유리한 암반등급의 거동과는 다르므로 암반특성에 따라서 암반경계층을 기준으로 $0.5D{\sim}1.0D$구간을 안전측(보수적)으로 평가하여 설계에 반영하거나, 지보패턴을 하향조정하는 것이 시공성, 작업효율성, 공사기간 등의 측면에서 효과적일 것으로 판단된다.

• 터널과지하공간
• /
• 제19권2호
• /
• pp.132-145
• /
• 2009

암반내 존재하는 단층은 암반의 거동에 미치는 영향이 매우 크기 때문에 암반사면, 터널과 같은 암반구조물의 설계 및 시공에 있어서 단층특성에 대한 조사는 무엇보다 중요하다 할 수 있다. 그러나 설계단계에서 이러한 특성을 파악하기에 한계가 있기 때문에 시공중 막장관찰과 추가지반조사를 통하여 터널주변에 존재하는 단층의 분포 및 공학적 특성에 대하여 조사하여야 한다. 본 연구에서는 운모편암지역에서의 대단면 터널 공사중 설계시 파악되지 않은 대규모 스러스트 단층대가 확인됨에 따라, 단층대의 특성을 규명하기 위하여 다양한 지질조사 및 현장시험을 실시하였다. 이러한 지반조사결과를 바탕으로 단층의 성인, 구조지질적 분포특성 및 단층암의 공학적 특성을 파악하였으며, 단층대 통과구간에서 안전하게 터널을 굴착할 수 있도록 합리적인 지보 및 보강대책을 수립하였다.

• 터널과지하공간
• /
• 제3권1호
• /
• pp.63-79
• /
• 1993

The design of tunnels in rock masses often demands more informations on geologic features and rock mass properties than acquired by usual field survey and laboratory testings. In practice, the situation that a perfect set of geological and mechanical input data is given to geomechanics design engineer is rare, while the engineers are asked to achieve a high level of reliability in their design products. This study presents an artificial neural network which is developed to resolve the difficulties encountered in conventional design techniques, particulary the problem of deteriorating the confidence of existing numerical techniques such as the finite element, boundary element and distinct element methods due to the incomplete adn vague input data. The neural network has inferring capabilities to identify the possible failure modes, support requirements and its timing for underground openings, from previous case histories. Use of the neural network has resulted in a better estimate of the correlation between systems of rock mass classifications such as the RMR and Q systems. A back propagation learning algorithm together with a multi-layer network structure is adopted to enhance the inferential accuracy and efficiency of the neural network. A series of experiments comparing the results of the neural network with the actual field observations are performed to demonstrate the abilities of the artificial neural network as a new tunnel design assistance system.

• Computers and Concrete
• /
• 제6권2호
• /
• pp.109-132
• /
• 2009

This paper presents finite element impact analysis for the design of Structurally Dissipating Rock-shed (SDR), an innovative design of reinforced concrete rock-shed. By using an appropriate finite element impact algorithm, the SDR structure is modelled in a simplified but efficient way. The numerical results are firstly verified through comparisons with the results of the experiments recently realized by ESIGEC and TONELLO I.C. It is shown that, using this impact algorithm, it is possible to correctly predict the SDR structural behaviour under different rock-fall impact conditions. Moreover, the numerical results show that the slab centre is the critical impact location for reinforced concrete slab design. The impact analyses have thus been focused on the impacts at the slab centre for the SDR structural optimization. Several series of parametric studies have been carried out with respect to load cases and engineering parameters choices. These numerical results support the robustness of the new SDR concept, and serve to optimize SDR structure and improve its conventional engineering design, especially for ensuring the slab punching shear resistance.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.96-103
• /
• 2002

In this study, design concepts of Seoul Subway Construction (901∼914) are reviewed in relation to the cases for temporary soil support wall systems which are revealed in highly developed design competitions such as Turnkey and Alternative based on. Especially soil and rock properties, various design schemes for dealing with soil and water pressures, new technology adopted etc are discussed very profoundly and broadly for the better understanding and additional clues for constructing new design technologies.

• 터널과지하공간
• /
• 제4권2호
• /
• pp.119-131
• /
• 1994

This is a Double-Track Railway tunnel in typical Tae-Gu black and gray shale forming part of the No.1 Line of the Tae-Gu Subway. The main fault zone at tunnel is a moderately to highly weathered and closely jointed zone, 0.5 m wide with associated paralled jointing which is slickensided and fractured. After excavation by blasting, the soft rocks should need to be reinforced with optimal supporting pattern which might be better redesigned through the consideration of the results of in-situ rock measurements at the field. Performances fo the field tests included Point Load Test, Schmidt Hammer Test, and field joint measurement gave the detail data for the optimum support design and safe excavation of the No.1 Line of Tae-Gu Subway at the No.1-7 consturction site adn the safety of this redesigned supports system was analysed by the FDM program FLAC.