• Geomechanics and Engineering
• /
• 제32권4호
• /
• pp.375-385
• /
• 2023

There are many joint fissures distributed in the engineering rock mass. In the process of geological history, the underground rock mass undergoes strong geological processes, and undergoes complex geological processes such as fracture breeding, expansion, recementation, and re-expansion. In this paper, the damage-stick-slip process (DSSP), an analysis model used for rock mass failure slip, was established to examine the master control and time-dependent mechanical properties of the new and primary fractures of a multi-fractured rock mass under the action of stress loading. The experimental system for the recemented multi-fractured rock mass was developed to validate the above theory. First, a rock mass failure test was conducted. Then, the failure stress state was kept constant, and the fractured rock mass was grouted and cemented. A secondary loading was applied until the grouted mass reached the intended strength to investigate the bearing capacity of the recemented multi-fractured rock mass, and an acoustic emission (AE) system was used to monitor AE events and the update of damage energy. The results show that the initial fracture angle and direction had a significant effect on the re-failure process of the cement rock mass; Compared with the monitoring results of the acoustic emission (AE) measurements, the master control surface, key blocks and other control factors in the multi-fractured rock mass were obtained; The triangular shaped block in rock mass plays an important role in the stress and displacement change of multi-fracture rock mass and the long fissure and the fractures with close fracture tip are easier to activate, and the position where the longer fractures intersect with the smaller fractures is easier to generate new fractures. The results are of great significance to a multi-block structure, which affects the safety of underground coal mining.

• 터널과지하공간
• /
• 제12권3호
• /
• pp.220-228
• /
• 2002

절리암반에서의 열유동을 수치해석적으로 분석하였다. 1차원 모델 해석을 통하여 한 조의 절리군이 열전도에 미치는 영향을 비교 분석하고, 이론해와 비교하였다. 절리 내에 물이 전혀 없는 경우, 절리는 열 차단제의 역할을 하며 정상상태에서도 온도의 불연속이 관찰되었다. 따라서 암반 내 존재하는 절리가 완전 건조상태인 경우에는 개별적인 절리의 열차단 효과를 일일이 고려하여야 정확한 결과를 얻을 수 있다 그러나 절리 내에 물이 부분적으로 혹은 완전히 포화된 경우에는 열차단 효과가 현저히 줄어들어 온도 분포에 미치는 영향이 현저히 감소하였다. 따라서 절리 암반을 통한 열전도는 암반을 무결암의 열적 성질과 불연속면의 열적 성질을 포함한 열적 이방성 연속체로 가정함으로써 가능하다 할 수 있다. 절리의 포화 정도가 증가할수록 절리가 열유동에 미치는 영향이 감소하므로 암반의 열전달 특성은 등방에 가까워지며, 따라서 복잡한 모델을 이용한 해석보다는 현지 암반의 열물성을 정확히 측정하는 것이 더욱 중요함을 알 수 있었다.

• 한국철도학회논문집
• /
• 제8권1호
• /
• pp.82-86
• /
• 2005

Numerical methods to estimate behaviors of jointed rock mass can be roughly divided into two methods : continuous and discontinuous model. Generally, distinct element method(DEM) is applied in discontinuous model, and finite element method(FDM) or finite difference method(FDM) is utilized in continuum model. To predict a behavior of discontinuous model by DEM, it is essential to understand characteristics of joints developed in rock mass through field tests. However, results of field tests can not provide full information about rock mass because field tests are conducted in limited area. In this paper, discontinuous analysis by UDEC and continuous analysis by FLAC are utilized to estimate a behavior of a tunnel in jointed rock mass. For including discontinuous analysis in continuous analysis, joints in rock mass is considered by reducing rock mass properties obtained by RMR and decreasing shear strength of rock mass. By comparing and revising two analysis results, analysis results similar with practical behavior of a tunnel can be induced and appropriate support system is decided.

• 자원환경지질
• /
• 제39권4호
• /
• pp.451-471
• /
• 2006

암반공학 관련 국책과제로부터 암반공학 분야의 주요 연구과제와 연구 내용을 분석해 본 견과를 요약하면 다음과 같다. $\cdot$ 암반공학은 암석 혹은 현지 암반의 변형, 파괴 그리고 변위에 대한 것을 주 연구 내용으로 하고 있으며, 지질학적인 기초를 요구하는 학문이다. 암반내에 존재하는 불연속면은 지하공간을 포함하는 암반의 거동을 결정하는 가장 중요한 변수이다. $\cdot$ 현장조사와 시험의 기본적인 목적은 암반의 강도 정수의 결정과 현지 암반의 응력 상태를 규명하는데 있으며, 실험실 시험 혹은 현장 시험은 반드시 대상 암반의 역학적 거동을 대표할 수 있도록 수행되어야 한다. $\cdot$ 수치해석의 견과는 그 결과가 비록 정량화되었더라도 정성적인 기준에 의해 평가되는 것이 타당하다. 암반의 변위 거동을 면밀하게 계측하여야 NATM의 기본 개념에 맞는 올바른 터널과 지하공간의 설계와 시공이 가능하며, 암반 사면의 안정성을 분석하는데 있어 역해석에 의해 산정된 강도 정수가 전제되어야 할 것으로 평가된다.

• 터널과지하공간
• /
• 제7권1호
• /
• pp.1-12
• /
• 1997

Engineering rock mass classification is extensively used to determine the reasonable support system throughout the tunneling process in the field. Selection of support system based on the results of engineering rock mass classification is simple and straight-forward. However, this method cannot consider the effect of in-situ stresses, mechanical properties of support material, and support installation time on the behavior or rock-support system To handle the various conditions encountered in the underground excavation sites rock-support system. To handle the various conditions encountered in th eunderground excavation sites rock-support interaction program has been developed. This program can analyze the interaction between rock mass and support materials and also can simulate the tunnel excavation-support insstallation process by controlling the support installation time and the stiffness of support system. Practical applicability of this program was verfied by comparing the results of support design to those from rock mass classification for virtual underground excavation at the drilling site KD-06 in Geoje island.

• 터널과지하공간
• /
• 제5권1호
• /
• pp.1-10
• /
• 1995

The behavior of a jointed rock mass depends mainly on the geometrical and mechanical properties of joints. The failure mode of a rock mass and kinematics of rock blocks are governed by the orientation, spacing, and persistence of joints. The mechanical properties such as dilation angle, shear strength, maximum closure, strength of asperities and friction coeffiient play important roles on the stability and deformation of the rock mass. The normal and shear behaviour of a joint are coupled due to dilation, and the joint deformation depends also on the boundary conditions such as stiffness conditons. In this paper, the joint constitutive law including the dilatant behaviour of a joint is numerically modelled using the edge-to-edge contact logic in distinct element method. Also, presented is the method to quantify the input parameters used in the joint law. The results from uniaxial compression and direct shear tests using the numeical model of the single joint were compared to the analytic results from them. The boundary effect on the behaviour of a joint is verified by comparing the results of direct shear test under constant stress boundary condition with those under constant stiffness boundary condition. The numerical model developed is applied to a complex jointed rock mass to examine its performance and to evaluate the effect of joint dilation on tunnel stability.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2000년도 암반공학문제의 수치해석(Numerical Analysis in Rock Engineering Problems)
• /
• pp.211-222
• /
• 2000

대형 구조물 기초로 암반에 근입된 현장타설말뚝의 사용이 현저히 증가하고 있음에도 암반의 공학적 물성과 설계정수와의 관련이 명확히 정립되지 못한실정이다. 이에 본 연구에서는 암반근입말뚝의 거동 특성을 이론적으로 연구하고, 이를 수치적으로 모델링하기 위하여 지반-구조물 상호작용에 관련한 경계면 물성을 기존 연구 결과에 기초하여 합리적으로 산정하였다. 암반의 물성과 경계면 물성간의 관계를 이용하여 암반근입말뚝의 거동을 수치적으로 모사할 수 있으며 , 또한 현장 계측을 통해 얻은 말뚝의 하중전이 양상이 수치적으로 모사된 결과와 잘 일치함을 확인하였다.

• Geomechanics and Engineering
• /
• 재33권6호
• /
• pp.553-565
• /
• 2023

As the structure of broken rock mass is complex, with obvious discontinuity and anisotropy, it is generally necessary to reinforce broken rock mass using grouting in underground construction. The purpose of this study is to experimentally investigate the mechanical properties of broken rock mass after grouting reinforcement with consideration of the characteristics of broken rock mass (i.e., degree of fragmentation and shape) and a range of reinforcement methods such as relative strength ratio between the broken rock mass and cement-based grout stone body (λ), and volumetric block proportion (VBP) representing the volumetric ratio of broken rock mass and the overall cement grout-broken rock mass mixture after the reinforcement. The experimental results show that the strength and deformation of the reinforced broken rock mass is largely determined by relative strength ratio (λ) and VBP. In addition, the enhancement in compressive strength by grouting is more obvious for broken rock mass with spherical shape under a relatively high strength ratio (e.g., λ=2.0), whereas the shape of rock mass has little influence when the strength ratio is low (e.g., λ=0.1). Importantly, the results indicate that columnar splitting failure and inclined shear failure are two typical failure modes of broken rock mass with grouting reinforcement.

• 터널과지하공간
• /
• 제10권3호
• /
• pp.457-468
• /
• 2000

대형 구조물 기초로 암반에 근입된 현장타설말뚝의 사용이 현저히 증가하고 있음에도 암반의 공학적 물성과 설계정수와의 관련이 명확히 정립되지 못한 실정이다. 이에 본 연구에서는 암반근입말뚝의 거동 특성을 이론적으로 연구하고, 이를 수치적으로 모델링하기 위하여 지반-구조물 상호작용에 관련한 경계면 물성을 기존 연구 결과에 기초하여 합리적으로 산정 하였다. 암반의 물성과 경계면 물성간의 관계를 이용하여 암반근입말뚝의 거동을 수치적으로 모사 할 수 있으며, 또한 현장 계측을 통해 얻은 말뚝의 하중전이 양상이 수치적으로 모사 된 결과와 잘 일치함을 확인하였다.

• Geomechanics and Engineering
• /
• 제34권2호
• /
• pp.139-154
• /
• 2023

Red-bed soft rock is a common stratum and it is necessary to evaluate the mechanical properties and bearing capacity of red-bed soft rock mass affected by different environmental effects. This paper presents a complete procedure for evaluating the bearing capacity of red-bed soft rock by means of geophysical exploration and in-situ rock mechanics tests. Firstly, the thickness of surface loosened rock mass of red-bed soft rock was determined using geophysical prospecting method. Then, three environmental effects, including natural weathering effect, dry-wet cycling effect and concrete sealing effect, were considered. After each effect lasted for three months, in-situ rock mass mechanical tests were conducted. The test results show that the mechanical properties of rock mass considering the sealing effect of concrete were maintained. After considering the natural weathering effect, the mechanical parameters decrease to a certain extent. After considering the effect of dry-wet cycling, the decreases of mechanical parameters are the most significant. The test results confirm that the red-bed soft rock dam foundation rock mass will be significantly affected by various environmental effects. Therefore, combined with the mechanical test results, some useful implementations are proposed for the construction of a red-bed soft rock dam foundation.