The understanding of tool-rock interaction mechanism is of high essence for improving the rock breaking efficiency and optimizing the drilling parameters in mechanical rock breaking. In this study, the tool-rock interaction models of indentation and cutting are carried out by employing the discrete element method (DEM) to examine the rock failure modes of various brittleness rocks and critical indentation and cutting depths of the ductile to brittle failure mode transition. The results show that the cluster size and inter-cluster to intra-cluster bond strength ratio are the key factors which influence the UCS magnitude and the UCS to BTS ratio. The UCS to BTS strength ratio can be increased to a more realistic value using clustered rock model so that the characteristics of real rocks can be better represented. The critical indentation and cutting depth decrease with the brittleness of rock increases and the decreasing rate reduces dramatically against the brittleness value. This effort may lead to a better understanding of rock breaking mechanisms in mechanical excavation, and may contribute to the improvement in the design of rock excavation machines and the related parameters determination.
Based on theories of rock mechanics, rock fragmentation, mechanics of elasto-plasticity, and energy dissipation etc., a method is presented for evaluating the rock fragmentation efficiency by using plastic energy dissipation ratio as an index. Using the presented method, the fragmentation efficiency of rocks with different strengths (corresponding to soft, intermediately hard and hard ones) under indentation is analyzed and compared. The theoretical and numerical simulation analyses are then combined with experimental results to systematically reveal the fragmentation mechanism of rocks under indentation of indenter. The results indicate that the fragmentation efficiency of rocks is higher when the plastic energy dissipation ratio is lower, and hence the drilling efficiency is higher. For the rocks with higher hardness and brittleness, the plastic energy dissipation ratio of the rocks at crush is lower. For rocks with lower hardness and brittleness (such as sandstone), most of the work done by the indenter to the rocks is transferred to the elastic and plastic energy of the rocks. However, most of such work is transferred to the elastic energy when the hardness and the brittleness of the rocks are higher. The plastic deformation is small and little energy is dissipated for brittle crush, and the elastic energy is mainly transferred to the kinetic energy of the rock fragment. The plastic energy ratio is proved to produce more accurate assessment on the fragmentation efficiency of rocks, and the presented method can provide a theoretical basis for the optimization of drill bit and selection of well drilling as well as for the selection of the rock fragmentation ways.
동적 초미소 경도법의 압입시험, 하중-비하중 시험, 그리고 반복시험을 이용하여 심도별 대전화강암 내 광물들의 경도와 역학적 특성을 살펴보았다. 시험 결과 세 개 구간(Group-1, -2, -3)으로 광물 집단의 분류가 가능하였다. Martens 경도값은 세 가지 시험법 모두에서 41 m와 223 m 심도에 따른 차이가 크지 않았다. 그럼에도 불구하고, 그 크기는 반복시험<하중-비하중 시험<압입시험 순으로 나타났다. 광물 집단별 평균 Martens 경도, 탄성계수, indentation work 등을 고려해 볼때, 그들의 경계는 비교적 뚜렷하게 나타났다. 결론적으로 동적 초미소 경도법의 세 가지 형태 시험법을 이용함으로써 광물들에 대한 비교적 정확한 경도값을 얻을 수 있었다. 또한 하중-비하중 시험과 반복시험으로부터는 광물들의 탄성계수와 광물들의 탄성적-소성적 성질 특성 파악도 가능하였다.
In this study, the effect of the tensile strength and ratio of disc spacing to penetration depth on the efficiency of tunnel boring machine (TBM) is investigated using Particle flow code (PFC) in two dimensions. Models with dimensions of $150{\times}70mm$ made of rocks with four different tensile strength values of 5 MPa, 10 MPa, 15 MPa and 20 MPa were separately analyzed and two "U" shape cutters with width of 10 mm were penetrated into the rock model by velocity rate of 0.1 mm/s. The spacing between cutters was also varied in this study. Failure patterns for 5 different penetration depths of 3 mm, 4 mm, 5 mm, 6 mm, and 7 mm were registered. Totally 100 indentation test were performed to study the optimal tool-rock interaction. An equation relating mechanical rock properties with geometric characteristics for the optimal TBM performance is proposed. The results of numerical simulations show that the effective rock-cutting condition corresponding to the minimum specific energy can be estimated by an optimized disc spacing to penetration depth, which, in fact, is found to be proportional to the rock's tensile strength.
본 기술보고는 개발 중인 암반 커팅 스플리팅 공법을 간략히 소개하였다. 이 공법은 암반 커팅 공정 후 블럭을 스플리팅하여 암반을 굴착하는 공법이다. 암반면의 커팅 지오메트리를 설계한 후 치즐을 압입하여 암석블록을 제거하는 방식이다. 이 때 적절하게 커팅블록이 설계되어야 원활한 암석블록 하단부에 인장균열이 원활히 전파된다. 인장균열 성장에 필요한 파괴인성 모드1을 이용하여 암석블럭의 스플리팅에 필요한 압입력을 추산하는 분석해를 고안하였다. 굴착기의 유압브레이커의 타격력을 분석하였고, 암석블록 설계 지오메트리에 따라 시공가능한 굴착기 등급을 분석하였다.
LCM 시험은 TBM에서의 디스크 커터 설계와 굴진성능 예측을 위한 가장 신뢰성 있는 시험 중의 하나이다. 그러나 이는 실대형 암석시료의 채취, 운반 및 거치에 많은 비용이 소요되는 단점을 가지고 있으며, 절리가 포함된 시료에 대한 시험이 용이하지 않아 시험에서 예측된 모델을 설계에 활용하기 어려운 경우가 많다. 따라서 LCM 시험이 갖는 이러한 경제적 시간적 제약점들을 극복할 수 있는 현실성 있는 수치모델링이 고려된다면, 현장에서의 복잡한 검토과정 없이 현장에 직접 적용할 수 있는 적합한 형태의 TBM 절삭모델을 제시할 수 있을 것이다. 본 연구에서는 UDEC을 이용하여 단일절리를 포함한 암석시료에 대한 디스크 커터의 절삭 메커니즘 분석을 위해 디스크 커터의 가압지점의 위치와 절리의 방향성에 따른 균열전파양상을 분석하였으며, 이를 통하여 절리의 방향에 따른 적절한 디스크 커터의 가압지점 위치 및 디스크 커터의 적정 간격을 도출하였다.
The low rate of penetration and short lifetime of drilling bit served as the most common problems encountered in hard formation drilling, thus leading to severe restriction of drilling efficiency in oil and gas reservoir. This study developed a new local impact drilling method to enhance hard formation drilling efficiency. The limitation length formulas of radial/lateral cracks under static indentation and dynamic impact are derived based on the experimental research of Marshall D.B considering the mud column pressure and confining pressure. The local impact rock breaking simulation model is conducted to investigate its ROP raising effect. The results demonstrate that the length of radial/lateral cracks will increase as the decrease of mud pressure and confining pressure, and the local impact can result in a damage zone round the impact crater which helps the rock cutting, thus leading to the ROP increase. The numerical results also demonstrate the advantages of local impact method for raising ROP and the vibration reduction of bit in hard formation drilling. This study has shown that the local impact method can help raising the ROP and vibration reduction of bit, and it may be applied in drilling engineering.
Stress-strain responses of weak-to-strong carbonate rocks used for tunnel construction were studied. The analysis of applicability of exponential stress-strain models based on Haldane's distribution function is presented. It is revealed that these exponential equations presented in transformed forms allow us to predict stress-strain relationships over the whole pre-failure strain range without mechanical testing of rock samples under compression using a press machine and to avoid measurements of axial failure strains for which relatively large values of compressive stress are required. In this study, only one point measurement (small strain at small stress) using indentation test and uniaxial compressive strength determined by a standard Schmidt hammer are considered as input parameters to predict stress-strain response from zero strain/zero stress up to failure. Observations show good predictive capabilities of transformed stress-stress models for weak-to-strong (${\sigma}_c$ <100 MPa) heterogeneous carbonate rocks exhibiting small (< 0.5 %), intermediate (< 1 %) and large (> 1 %) axial strains.
제주도의 알칼리암류 및 솔라아이트에 대한 Sr, Nd 그리고 Pb 동위원소비의 특징은 서루 유사하거나, 솔리아이트가 조금 더 부화된 특징을 갖는다. 그러나 분출시기에 따라 솔리아이트의 즉징을 구분하면, 전기의 것은 Lee (1982)의 용암대지 형성기의 알칼리암류와 유사한 반면, 후기의 것은 이 연구의 알칼리암류와 유사하다. 이는 알칼리암류와 솔리아이트가 동질의 근원에서 유래하였음을 지시하며, 분출 시기에 따라 부분용융된 맨틀 근원지으 성질이 차이가 있었음을 시사한다. 제주도 화산암류는 사모아 군도의 화산암류의 변화 및 남중국 분지 화산암류의 변화 경향과 중첩되어 DMM과 EM II 사이의 혼합으로 잘 설명될 수 있는 변화경향을 지닌다. 이는 제주도를 제외한 우리나라의 신생대 화산암류 및 북동 중국 화산암류들이 DMM-EM I사이의 혼합으로 설명이 되는 변화경향을 보이는 것과 차이가 난다. DMM-EM II 맨틀 물질간의 섞임 계산 결과, 제주도 화산암류를 형성한 맨틀 물질은 결핍 맨틀 (DMM)에 부화된 맨틀 (EMII)물질이 약 10% 이내의 비율로 섞인 특징을 가짐을 지시한다. 제주도를 포함한 우리나라 및 중국의 신생대 화산암류의 동위원소적 특징을 북중국 지괴와 남중국 지괴으 충돌이론(예,Yin and Nie, 1993)과 결부시키면, 부화된 맨틀 물질의 공급원으로 고려되는 대륙암권 맨틀의 지화학적 조성이 지괴에 따라 차이가 있었음을 나타낸다. 즉 북중국 지괴는 EM I의 표식을, 남중국 지괴는 EM II의 표식을 가지고 있었을 경우로 설명될 수 있음을 제시한다.
경남 하동군 일대에 분포하고 있는 화강암질 암체내에서는 대규모의 Ti광체가 부존되어 있으며, 특히 옥종면 정수리 일대에서는 회유금속원소(REE)를 함유하는 갈렴석 결정들이 다수 발견되었다. 본 연구에서는 갈렴석에 대해 광학적연구, 전자현미분석, 원자흡수분광분석, X선회절분석, 적외선흡수분광분석, 비중 및 미경도 측정을 실시하였다. 갈렴석은 최대 크기 $3{\times}6cm$ 정도의 괴상형태로 산출되며 석영, 녹염석, 저어콘, 흑운모, 백운모 등과 공존한다. 갈렴석의 연마면 관찰로는 누대구조가 관찰되는데 이것은 자철석이 산점상으로 분포하기 때문이다. Th으로부터 방출되는 ${\alpha}$-입자의 존재가 방사능사진법에 의해 확인이 되었음에도 불구하고 메타믹트상태의 정도가 뚜렷하지 않다. 이 갈렴석내에는 ${\Sigma}$REE가 19.88-23.99%정도로 높은 편이며 CaO함량이 8.35-10.29wt%로 적은 편이다. 갈렴석의 성인에 대해서는 아직 확실하게 규명되지 않았으나 $TiO_2$의 함량(0.89-1.13wt%)이 높은 것과 저어콘과 같은 광물과 공존하고 있는 것으로 보아 마그마와 관련된 REE와 Ti성분이 풍부한 용액으로부터 정출된 것으로 추축된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.