• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.04a
• /
• pp.47-60
• /
• 1998

It is considered in this paper that the main causes of tunnel collapse during the construction were the insufficiency of data of geotechnical investigations, or their limits due to special ground condition such as its heterogeneity and anisotropy It is thought that safety of ground can be affected by the geological conditions such as presences of discontinuities in good intact rocks, and considered to be necessary that awareness of the conditions of discontinuities in advance is important to apply adequate reinforcement measures. It is also shown that a serious accident had occurred because of the unawareness of the permeable alluvial deposits at the top of the tunnel. And it is shown that the example of application of the results of geotechnical investigation such as face-mapping, pilot boring etc. during tunnel construction, and a serious deformation of tunnel under special geological condition. Therefore, it is strongly recommended to perform an adequate geotechnical investigation to confirm the geotechnical conditons of ground before design, and supplimentary investigation is also needed depending on conditions for safe and econonic construction.

• Parasites, Hosts and Diseases
• /
• v.38 no.3
• /
• pp.151-158
• /
• 2000

Pneumocystis carinii is a major opportunistic pathogen which has been found in the lungs of a wide variety of mammalian host species, and the fact suggests the possibility of intraspecific variation. Until now, P. carinii from different mammalian species are differentiated as subspecies, and the rats are known to be infected by two subspecies. The present study investigated genetic heterogeneity of P. carinii isolates from two strains of rats in Korea and China by molecular karyotyping, RFLP and sequencing analysis. Karyotypes of P. carinii were grouped into three, two from two strains of rats In Korea and one from rats in China. However RFLP of PCR product of ribosomal and MSG gene of the P. carinii isolates showed same pattern. The sequence homology rates of ${\alpha}-tubulin$ DNA of the P. carinii isolates were 96% in Seoul Wistar rats, 93% in Seoul Sprague-Dawley rats, and 85% in Chinese Sprague-Dawley rats. The present finding confirmed that P. carinii from rats in Korea are grouped into two karyotype strains which are different from that of P. carinii from rats in China. The Chinese isolate shows a little different sequences of ${\alpha}-tubulin$ DNA.

• Economic and Environmental Geology
• /
• v.44 no.5
• /
• pp.387-397
• /
• 2011

In this study, we conducted the study of the merits and demerits of the laser flash and the divided-bar methods for measuring the thermal conductivity of rocks and investigated applicability of the divided-bar apparatus which was developed by KIGAM. The laser flash method can measure thermal diffusivity, specific heat capacity, and thermal conductivity of rocks with even small thickness (< ~3 mm) in the high temperature range($25-200^{\circ}C$) in non-contact mode. For the laser flash method, samples must be uniform and homogeneous. In the case of the divided-bar method, the apparatus measures only thermal conductivity of rock samples at the room temperature. We measured thermal conductivities of 12 rock samples with low density and high porosity using two methods. In the laser flash method, there exist potential errors caused by the effect of pulse dispersion and reflection by various minerals and porosity in rock samples; the difference in thermal conductivity values measured on the front surface and the opposite surface ranges from 0.001 to 0.140 W/mK with the standard deviation of 0.003~0.089 W/mK, which seems to be caused by heterogeneity of rock samples. On the contrary, the divided-bar apparatus shows stable thermal conductivity measurements and relatively small measurement errors; the difference in thermal conductivity values, just as we applied to the laser frash method, is 0.001~0.016 W/mK with the standard deviation 0.001~0.034 W/mK. In turn, the divided-bar method can be applied to more thick samples that are more representative of bulk thermal conductivity.

• Nuclear Engineering and Technology
• /
• v.27 no.2
• /
• pp.176-188
• /
• 1995

A particle tracking scheme was developed in order to model radionuclide transport through a tortuous flow Held in a rock fracture. The particle tacking method may be used effectively in a heterogeneous flow field such as rock fracture. The parallel plate representation of the single fracture fails to recognize the spatial heterogeneity in the fracture aperture and thus seems inadequate in describing fluid movement through a real fracture. The heterogeneous flow field une modeled by a variable aperture channel model after characterizing aperture distribution by a hydraulic test. To support the validation of radionuclide transport models, a radionuclide migration experiment was performed in a natural fracture of granite. $^3$$H_2O$ and $^{131}$ I are used as tracers. Simulated results were in agreement with experimental result and therefore support the validity of the transport model. Residence time distributions display multipeak curves caused by the fast arrival of solutes traveling along preferential fracture channels and by the much slower arrival of solutes following tortous routes through the fracture. Results from the modelling of the transport of nonsorbing tracer through the fracture show that diffusion into the interconnected pore space in the rock mass has a significant effect on retardation.

• Economic and Environmental Geology
• /
• v.47 no.3
• /
• pp.247-254
• /
• 2014

The compressibility of fracture in naturally fractured reservoir is larger than the compressibility of matrix in rock, although the compressibility of a typical rock is very small. The effective compressibility including the fracture compressibility should be considered to predict oil recovery correctly. It is hard to quantify changes of fracture aperture and pore volume in reservoir without the effective compressibility. In this study, oil recovery is analyzed by commercial simulator concerning the fracture compressibility based on fracture properties. We found that the effective compressibility affects oil recovery with change of polymer flooding factors such as polymer molar weight, concentration and injection rate. The estimated cumulative oil production is smaller with the effective compressibility than without it. Also, bottomhole pressure decreases rapidly without considering effective fracture compressibility.

• The Journal of Engineering Geology
• /
• v.6 no.2
• /
• pp.83-93
• /
• 1996

A method is proposed to estimate aquifer parameters in a heterogeneous and anisotropic aquifer under steady-state groundwater flow conditions on the basis of maximum likelihood concept. Zonation method is adopted for parameterization, and estimation errors are analyzed by examining the estimation error covariance matrix in the eigenspace. This study demonstrates the ability of the proposed model to estimate parameters and helps to understand the characteristics of the inverse problem. This study also explores various features of the inverse methodology by applying it to a set of field data of the Taegu area. In the field example, transmissivities were estimated under three different zonation patterns. Recharge rates in the Taegu area were also estimated using MODINV which is an inverse model compatible with MODFLOW.The estimation results indicate that anisotropy of aquifer parameters should be considered for the crystalline rock aquifer which is the dominant aquifer system in Korea.

• Structural Engineering and Mechanics
• /
• v.38 no.6
• /
• pp.803-823
• /
• 2011

In this paper, the three dimensional Parallel Realistic Failure Process Analysis ($RFPA^{3D}$-Parallel) code based on micromechanical model is employed to investigate the bonding behavior in FRP sheet bonded to concrete in single shear test. In the model, the heterogeneity of brittle disordered material at a meso-scale was taken into consideration in order to realistically demonstrate the mechanical characteristics of FRP-to-concrete. Modified Mohr-coulomb strength criterion with tension cut-off, where a stressed element can damage in shear or in tension, was adopted and a stiffness degradation approach was used to simulate the initiation, propagation and growth of microcracks in the model. In addition, a Master-Slave parallel operation control technique was adopted to implement the parallel computation of a large numerical model. Parallel computational results of debonding of FRP-concrete visually reproduce the spatial and temporal debonding failure progression of microcracks in FRP sheet bonded to concrete, which agrees well with the existing testing results in laboratory. The numerical approach in this study provides a useful tool for enhancing our understanding of cracking and debonding failure process and mechanism of FRP-concrete and our ability to predict mechanical performance and reliability of these FRP sheet bonded to concrete structures.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.2
• /
• pp.217-225
• /
• 2003

The ground reinforcement effect of pressure grouting depends on grout penetration into ground. It is not, however, easy to predict the grout penetration in the design process because of the heterogeneity of ground conditions. This study investigates the proper grouting pressure and grouting method through laboratory model tests for pressure grouting using loose to medium dense crushed rock and sandy ground using specially designed and fabricated device. The optimum injection pressure, grout quantity and injection time are investigated through performing pressure grouting under changing conditions of injection in this test. From the test results, it was found that optimum injection pressure covers the range of 3 to 4kg/cm$^2$.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.3
• /
• pp.179-192
• /
• 2013

This study is characterized the groundwater flow pattern near crystalline site of Yangbook-Myeon, Gyeong-ju City, South Korea. From the time series analyses, groundwater level could be classified into 4 types reflecting the hydrogeological characteristics and rainfall pattern. The type I (DB1-1, DB1-2) may be directly influenced by rainfall pattern. The type II (DB1-3, DB1-7, KB-1, KB-2, KB-3, KB-7, KB-14, KB-15) may be influenced by rainfall event as well as groundwater flow through water-conducting features. The type III (DB-5, DB1-6, DB2-2, KB-10, KB-11, KB-13) may be predominantly happens in the crystaline rock mass, groundwater in this type flows through the minor fracture networks rather than direct effect of rainfall event. The type IV (DB1-8, KB-9) may be influenced by irregular variation of the groundwater level due to anisotropy and heterogeneity of crystalline rock.

• Tunnel and Underground Space
• /
• v.31 no.3
• /
• pp.145-166
• /
• 2021

Korea Stress Map database is built by integrating actual data of 1,400 in-situ stress measurements using hydraulic fracturing and overcoring method in South Korea. Korea Stress Map 2020 is presented based on the guideline proposed by World Stress Map Project. As detailed data, stress ratio and maximum horizontal stress direction distribution for each region are also presented. The dominant maximum horizontal stress direction in the Korean Peninsula is from northeast to southeast, and the magnitude of the in-situ stress is relatively distributed. There is some stress heterogeneity caused by local characteristics such as topographical and geological properties. We investigated case studies in which the in-situ stress was affected by mountainous topography, difference in rock quality of fracture zone, presence of mine or underground cavities, and geological structure of fault zone.