• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.9-16
• /
• 2005

The purpose of this study is to investigate the settlement characteristics of large drilled shafts embedded into bed rocks. To perform this research, 35 pile load test results for the large drilled shafts are used, because these deep foundations generally used as substructure systems for grand bridges. In case of the yield load can not be easily determined by load(P)-settlement(S) curve from the pile load test at the maximum loads, the standard settlements which can determine a yield load is established. The residual settlement equation of pile embedded in gneiss and igneous rocks is presented in this study. Also a equation is proposed to characterize the relationship between loads and elastic settlements in pile load tests on the large drilled shaft embedded into bedrock. Then, large drilled shaft's settlement characteristics are examined on pile length, pile diameter and pile's socked depth into rock at the pile tip.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.894-901
• /
• 2006

In general, the tension fores of hanger cable in suspension bridges play an important role in evaluating the bridge state. The vibration method, as a conventional one, has been widely applied to estimate the tension fores by using the measured frequencies on hanger cables. However, the vibration method is not applicable to short hanger cables because the frequency of short cables is severely sensitive to the flexural rigidity. Thus, in this study, the tension forces of short hanger cables, of which the length is shorter than 10meters, were estimated through back analysis of the cable frequencies measured from Gwang-An suspension bridge in Korea. Direct approach to rock analysis is adopted using the univariate method among the direct search methods as an optimization technique. The univariate method is able to search the optimal tension forces without regard to the initial ones and has a rapid convergence rate. To verify the feasibility of back analysis, the results from back analysis and vibration method are compared with the design tension forces. From the comparison, it can be inferred that back analysis results are more reasonable agreement with the design tension forces of short hanger cable. Therefore, it is concluded that back analysis applied in this study is an appropriate tool for estimating tension forces of short hanger cables.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 3차
• /
• pp.72-77
• /
• 2010

The Incheon Bridge, which was opened to the traffic in October 2009, is an 18.4 km long sea-crossing bridge connecting the Incheon International Airport with the expressway networks around the Seoul metropolitan area by way of Songdo District of Incheon City. This bridge is an integration of several special featured bridges and the major part of the bridge consists of cable-stayed spans. This marine cable-stayed bridge has a main span of 800 m wide to cross the vessel navigation channel in and out of the Incheon Port. In waterways where ship collision is anticipated, bridges shall be designed to resist ship impact forces, and/or, adequately protected by ship impact protection (SIP) systems. For the Incheon Bridge, large diameter circular dolphins as SIP were made at 44 locations of the both side of the main span around the piers of the cable-stayed bridge span. This world's largest dolphin-type SIP system protects the bridge against the collision with 100,000 DWT tanker navigating the channel with speed of 10 knots. Diameter of the dolphin is up to 25 m. Vessel collision risk was assessed by probability based analysis with AASHTO Method-II. The annual frequency of bridge collapse through the risk analysis for 71,370 cases of the impact scenario was less than $0.5{\times}10^{-4}$ and satisfies design requirements. The dolphin is the circular sheet pile structure filled with crushed rock and closed at the top with a robust concrete cap. The structural design was performed with numerical analyses of which constitutional model was verified by the physical model experiment using the geo-centrifugal testing equipment. 3D non-linear finite element models were used to analyze the structural response and energy-dissipating capability of dolphins which were deeply embedded in the seabed. The dolphin structure secures external stability and internal stability for ordinary loads such as wave and current pressure. Considering failure mechanism, stability assessment was performed for the strength limit state and service limit state of the dolphins. The friction angle of the crushed stone as a filling material was reduced to $38^{\circ}$ considering the possibility of contracting behavior as the impact.

• 한국터널지하공간학회 논문집
• /
• 제16권6호
• /
• pp.521-531
• /
• 2014

이 논문은 케이블 인발하중이 작용하는 현수교의 지중정착식 앵커리지 캐번 터널에 대한 거동과 관련된 연구이다. 수치해석 결과와 이중곡선 관계식에 의한 추정식에서 얻어진 극한인발저항력($P_u$) 결과와 비교를 통하여 앵커리지 거동, 앵커리지 설계 방법, 파괴면의 각도, ${\delta}$ 등을 분석하였다. 연구결과 $P/{\gamma}/H$와 변위와의 선형 상관관계, $P_u/{\gamma}/H$와 H/b와의 선형 상관관계를 활용하면 앵커리지 캐번 터널의 설치 심도를 쉽게 결정 할 수 있을 것으로 나타났다. 또한 수치해석에 의한 최대전단변형률 분포도와 소성영역 분포도를 분석한 결과 지반파괴 형태는 현재 사용되는 지반 콘 보델 보다는 원호모델에 더 가까운 것으로 나타났다. 이 연구에서는 계산이 간편하도록 원호모델을 단순화한 이중곡선 모델을 제안하였다. 수치해석 결과로부터 얻어진 평균 파괴각을 이중곡선 모델에 적용한 결과, 이중곡선 모델을 적용한 추정식에서 얻어진 극한인발저항력은 수치해석에서 얻어진 극한인발저항력 결과와 잘 일치하는 것으로 나타났다.

• 한국지반신소재학회논문집
• /
• 제19권1호
• /
• pp.83-91
• /
• 2020

본 연구에서는 대형 구조물 기초 및 교량 하부기초로 사용이 증가되고 있는 현장타설말뚝 및 대형 Caisson 기초의 지반조건 변화에 따른 지지거동 특성에 대하여 분석하였다. 현장타설말뚝의 항복하중 분석법을 이용하여 산정한 허용지지력은 각 방법마다 서로 유사한 허용지지력을 산정하는 것으로 분석되었다. 또한 극한하중 분석법으로 산정한 허용지지력은 각 방법에 따라 지지력의 차이가 큰 것으로 분석되었고, 기존의 유사 사례현장을 분석하여 재하하중과 침하량에 관한 관계를 제시하였으며, 이를 통하여 향후 설계 및 시공시 말뚝의 침하특성을 평가하기 위한 경험식으로 유용하게 활용 가능할 것으로 판단된다. 또한 대형케이슨의 침설시 발생하는 지반반력 분포에 대해 검토한 결과 풍화암층 구간은 기초 모서리부에서 항복이 발생된 후 지반반력이 감소하여 거의 일정한 지반반력 분포를 나타내었으며, 기반암층 구간에서는 중앙부의 지반반력 증가로 인해 기초 중앙부가 아래로 볼록한 형태의 지반반력 형태로 변형되었다. 이와 같은 결과를 이용하여 Fang(1991) 및 Kőgler(1936)가 기존에 제시한 이론을 증명하였다.

• Computers and Concrete
• /
• 제22권1호
• /
• pp.123-132
• /
• 2018

Reinforced concrete (RC) columns which are the main vertical structural members are exposed to several static and dynamic effects such as earthquake and wind. However, impact loading that is sudden impulsive dynamic one is the most effective loading type acting on the RC columns. Impact load is a kind of impulsive dynamic load which is ignored in the design process of RC columns like other structural members. The behavior of reinforced concrete columns under impact loading is an area of research that is still not well understood; however, work in this area continues to be motivated by a broad range of applications. Examples include reinforced concrete structures designed to resist accidental loading scenarios such as falling rock impact; vehicle or ship collisions with buildings, bridges, or offshore facilities; and structures that are used in high-threat or high-hazard applications, such as military fortification structures or nuclear facilities. In this study, free weight falling test setup is developed to investigate the behavior effects on RC columns under impact loading. For this purpose, eight RC column test specimens with 1/3 scale are manufactured. While drop height and mass of the striker are constant, application point of impact loading, stirrup spacing and concrete compression strength are the experimental variables. The time-history of the impact force, the accelerations of two points and the displacement of columns were measured. The crack patterns of RC columns are also observed. In the light of experimental results, low-velocity impact behavior of RC columns were determined and interpreted. Besides, the finite element models of RC columns are generated using ABAQUS software. It is found out that proposed finite element model could be used for evaluation of dynamic responses of RC columns subjected to low-velocity impact load.

• 농촌계획
• /
• 제23권3호
• /
• pp.83-96
• /
• 2017

This study aims to contemplate the archetypal landscape of a scenic site, Suseungdae area in Hwangsan-maeul village, Geochang-gun by reference research and field surveys and drew the results as follows. First, Since Seong Yundong(成允仝; 1450-1540) embarked on operating the Suseungdae in Eonari(魚川) in 16th century, Shin Gwon(愼權, 1501-1573) and Im Hun(林薰, 1500-1584) took a major role of establishing the archetypal landscape of the area. Henceforth, numerous scholars had kept exploring the scenery and completing the archetypal landscape of the area until the 19th century. Second, the locations of 50 archetypal landscape elements, including "Guyeon-dong sipgugyeong(龜淵洞十九景)" which are dispersed along the Wicheon, has been identified. On the base of this, the archetypal landscape of Suseungdae area is figured out as the 'Guyeon-dong(龜淵洞)' area coming down from 'Cheoksuam(滌愁巖)' to 'Byeoram(鼈巖)'. Third, many archetypal landscape elements are from the locations along the river. Among them, the ones named with rock: Am(巖) and Seok(石), which are shapes of turtles or terrapins, take the high rate and so do the ones named with 'Dam(潭)', which are waterscape. Fourth, among the cultural landscape elements, there are many garden structures such as Nujeong(樓亭) and Seowon(書院), which are located at the spots of viewing the landscape and the structures like banks, bridges and dams are also included. Furthermore, the letters engraved on the rocks are mainly about the landscape elements and are sometimes about the records of building and operating the landscapes by the people who were appreciating the arts and nature. Based on the range and characteristics of the archetypal landscape in Suseungdae area from this study, it is needed to take follow-up studies on the guidelines for efficient management by means of classifying the detailed fields so that there are no negative factors conflicting with the adjacent land use.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.545-553
• /
• 2009

A lot of long-span marine bridge, which connects land to island or island to island, are being designed and constructed lately in south-west coast in South Korea. In the past, caisson foundations in marine were mainly adopted in construction and stability aspect, however, nowadays with development of pile construction technology, drilled shaft foundations are mainly adopted. As the long span cable stayed bridge and suspension bridge applied with lots of loads are being designed, the scale of pile foundations are getting larger. As the construction cost of substructure including foundation in marine bridges is too high, the appropriate evaluation of the axial bearing capacity of pile becomes a core factor to decide the construction cost of foundation if the drilled shaft is adopted as foundation type of bridge. The evaluation values of skin friction and end bearing capacity of drilled shaft in weathered rock suggested in south Korea are only to introduce the foreign specifications, and most of them are designed in a kind of hard soil layer. Also the allowable load of pile section is less than the expected bearing capacity of pile in the soil condition since the allowable capacity of pile is undervalued. Recently in order to improve this factor the bi-axial hydraulic load test of pile was taken, the data of load transfer analysis of pile, unit of skin friction and end bearing capacity are accumulated. In our country, the design of piles are made with ASD, however, LRFD considering service, strength and extreme state was adopted in Incheon Grand Bridge implemented with BTL, and the research to systematize the resistance coefficient appropriate at home country are being progressed.

• 한국지진공학회논문집
• /
• 제8권6호통권40호
• /
• pp.31-43
• /
• 2004

지진취약도 분석을 통하여 교량의 지진 위험도를 평가하였다. 지진취약도 분석에서는 교각 하부의 소성힌지의 거동을 주요 손상인자로 분석하였으며, 또한 한반도 지진재해지도를 근거로 하여 지진발생확률을 산정한 후 이들을 이용하여 교량의 성능단계에 따른 손상발생확률을 분석하였다. 이 연구에서는 교각에 직접 전달되는 지진이 아닌 암반노두에서의 지진의 최대지반가속도에 대하여 지진취약도를 분석하였으며, 비선형 지진해석을 위해서는 층상지반의 영향으로 증폭된 지진하중을 고려하였다. 제안된 방법으로 예제교량의 지진위험도를 분석하였으며, 면진받침이 설치된 교량에 대한 지진 위험도의 저감 효과를 정량적으로 분석하였고, 지진재해지도에서의 조건이 다른 지역에 시공되는 경우의 지진위험도를 분석함으로써 현 시방서의 타당성을 간접적으로 검토하였다.

• 한국전산구조공학회논문집
• /
• 제32권6호
• /
• pp.425-434
• /
• 2019

연약지반이 두껍고 다양한 지층으로 구성된 지역에 건설되는 단일형 현장타설말뚝 교량은 다양한 지층을 통해서 단일형 말뚝으로 입력되는 지반운동에 대해서 내진안전성을 확보하는 것이 중요하다. 본 연구에서는 설계지반운동에 부합되는 다수의 인공합성지진을 생성하여 이를 암반의 입력지반으로 하여 지반해석을 수행하여 각 지층에서의 지반가속도이력을 산정하였다. 이 가속도이력을 이용하여 각 지층의 지반을 등가스프링으로 모델화하고, 각 지층에서의 가속도시간이력을 입력지반운동으로 하는 다지점 가진 지진해석을 수행하였다. 연약층의 비선형거동특성으로 입력지반운동의 세기는 크게 증폭되지 않아서 교량은 탄성영역 내에서 거동하였다. 한편, 특정 지층에서 산정된 가속도이력을 모든 지반스프링에 동시에 입력하면 응답이 감소하였다. 따라서, 다지점가진 해석을 수행하지 않으면 이러한 형식의 교량의 내진성능을 과대평가할 수 있다.