• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.263-263
• /
• 2000

Electromagnetic Suspension(EMS) System produces no noise, friction and heat through non-contacting operation Therefore, the applicable device using EMS system has a lot of attraction in case of the high-speed and non-contacting transmission EMS with nonlinear properties requires a precise airgap position control and stable kinematics characteristics under the disturbances, In this study, the nonlinear system was linearized by a Nonlinear Feedback Lineariztion(NFL) method. The NFL method requires that the modelling should be exact, and the state variables should be measured and a rapidly operating controller be necessary on account of a heavy data calculating In the experiments. the ideal control characteristics of the NFL was acquired through simulation at first. then the characteristics of the actual system were compared with those of simulation. In addition, the results by NFL were examined and analysed considering the characteristics of the PID control. The Control by NFL shows much stable control characteristics than the PID control. Whereas, the steady state errors occur for various disturbances. hence a robust control design is remained for a further study.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 전문대학교육위원 P
• /
• pp.28-30
• /
• 1999

This paper proposes a robust FPID(Fuzzy Proportional Integral Derivative) controller for the LFC(load frequency control) of 2-area power system. The PID gain parameters of the proposed robust FPID controller are self-tuned by PSGM(Product Sum Gravity Method) which is very similiar to human's inference procedures. As the results of simulation, the proposed FPID controller against various load disturbances shows that it is superior to the conventional control techniques such as optimal, PID and fuzzy control in the response characteristics of frequency and tie line power flow.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권4호
• /
• pp.27-35
• /
• 1996

The ship's propulsion efficiency depends upon a combibation of engine and propeller. The propeller has better efficiency as the engine has lower rotational speed. This situation led the engine manufacures to design the engine that has lower speed, longer stroke and a small number of cylinders. With this new trends the conventional mechanical-hydrualic governors for engine speed control have been replaced by digital speed controllers which adopted the PID control or the optimal control algorithm. But these control algorithms have not enough robustness to suppress the variations of the delay-time and the parameter perturbation especially in low speed engine. In this study we consider the perturbations of the engine parameters as the modeling uncetainties and design a robust speed controller for marine medium speed diesel engine by means of $ extit{H}_{infty}$control theory having the central solution. By comparing the results of the robust speed controller with those of mechanical governor and PID controller, the validity of the robust speed controller under parameter variations is confirmed. The speed control of the experimental diesel engine of carried out using actuator which is composed of PWM signal generator and D.C servo motor.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권4호
• /
• pp.349-349
• /
• 1996

The ship's propulsion efficiency depends upon a combibation of engine and propeller. The propeller has better efficiency as the engine has lower rotational speed. This situation led the engine manufacures to design the engine that has lower speed, longer stroke and a small number of cylinders. With this new trends the conventional mechanical-hydrualic governors for engine speed control have been replaced by digital speed controllers which adopted the PID control or the optimal control algorithm. But these control algorithms have not enough robustness to suppress the variations of the delay-time and the parameter perturbation especially in low speed engine. In this study we consider the perturbations of the engine parameters as the modeling uncetainties and design a robust speed controller for marine medium speed diesel engine by means of $ extit{H}_{infty}$control theory having the central solution. By comparing the results of the robust speed controller with those of mechanical governor and PID controller, the validity of the robust speed controller under parameter variations is confirmed. The speed control of the experimental diesel engine of carried out using actuator which is composed of PWM signal generator and D.C servo motor.

• 한국통신학회논문지
• /
• 제29권10C호
• /
• pp.1370-1377
• /
• 2004

시간 지연이 있는 시스템에서의 최적 제어 이득은 시간 지연이 없는 시스템에서 설계된 최적 제어 이득과 지연 시간에 대하여 계산된 상태천이 함수의 곱의 형태로 나타난다. 따라서 시간 지연이 없는 시스템에 대하여 PID제어기의 영점들을 플랜트의 최대 극점에 근접하도록 가중치 요소 Q와 R을 선택하여 최적 제어 이득을 구하고, 시간 지연이 있는 2차 시스템에서의 상태천이 함수를 계산하여 시간 지연이 있는 시스템에서의 강인한 최적 PID 제어기 설계가 가능하도록 하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.67.1-67
• /
• 2001

This paper presents a neural network based self-tuning fuzzy PI-PD control scheme for robust speed control of induction motor. The PID controller is being widely used in industrial applications. When continuously used long time, the electric and mechanical parameters of induction motor change, degrading the performance of PID controller considerably. This paper re-analyzes the fuzzy controller as conventional PID controller structure, and proposes a neural network based self-tuning fuzzy PI-PD controller whose scaling factors are adjusted automatically. Proposed scheme is simple in structure and computational burden is small ...

• 한국정보통신학회논문지
• /
• 제3권2호
• /
• pp.403-410
• /
• 1999

PID 제어기는 미지의 Deadzone을 가진 시스템에 적용될 때, 제어 성능이 저하되는 단점을 나타낼 수 있다. 이러한 문제를 해결하기 위하여, 본 논문에서는 2층 구조의 퍼지 논리를 이용한 PID 제어기를 제안하였다. 이 제어기의 구조는 전형적인 PID 제어기에 퍼지 보상기와 퍼지 동조기를 추가하여 구성하였다. 제안된 제어 방법은 전형적인 PID 제어기에 비하여 뛰어난 과도응답과 정상상태 성능을 나타낸다. 이 방법이 플랜트의 정상상태 이득뿐만 아니라 Deadzone 비선형성에서도 강인하다. 제안된 제어기의 성능은 시뮬레이션을 통하여 검증하였다

• Journal of Electrical Engineering and Technology
• /
• 제7권5호
• /
• pp.724-729
• /
• 2012

A fuzzy PID controller design method is proposed for precise robust control of DC-DC buck converters. The PID parameters are determined reflecting on the common control engineering knowledge that transient performances can be improved if the P and I gains are big and the D gain is small at the beginning. Different from the previous fuzzy control design methods, the proposed method requires no defuzzification module and the global stability of the proposed fuzzy control system can be guaranteed. The proposed fuzzy PID controller is implemented by using a low-cost 8-bit microcontroller, and simulation and experimental results are given to demonstrate the effectiveness of the proposed method.

• Transactions on Control, Automation and Systems Engineering
• /
• 제1권1호
• /
• pp.1-7
• /
• 1999

This paper gives a simulation study of a new fuzzy logic control(FLC) approach for the mold level control in continuous casting processes. The proposed FLC is PID type hybridizing the conventional fuzzy PI control and Fuzzy PD control with a simplified design scheme. It is shown that, compared with the conventional control, this new control strategy can achieve superior performance for steady-state response and is more robust against process parameter variations and disturbances.

• Earthquakes and Structures
• /
• 제6권2호
• /
• pp.217-235
• /
• 2014

In this paper, different feedback control strategies are presented for active seismic control using proportional-integral-derivative (PID) type controllers. The parameters of PID controller are found by using an numerical algorithm considering time delay, maximum allowed control force and time domain analyses of shear buildings under different earthquake excitations. The numerical algorithm scans combinations of different controller parameters such as proportional gain ($K_p$), integral time ($T_i$) and derivative time ($T_d$) in order to minimize a defined response of the structure. The controllers for displacement, velocity and acceleration feedback control strategies are tuned for structures with active control at the first story and all stories. The performance and robustness of different feedback controls on time and frequency responses of structures are evaluated. All feedback controls are generally robust for the changing properties of the structure, but acceleration feedback control is the best one for efficiency and stability of control system.