• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.4
• /
• pp.386-394
• /
• 2011

This paper is concerned with the application of the vision control scheme for robot's point placement task in discontinuous trajectory caused by obstacle. The proposed vision control scheme consists of four models, which are the robot's kinematic model, vision system model, 6-parameters estimation model, and robot's joint angles estimation model. For this study, the discontinuous trajectory by obstacle is divided into two obstacle regions. Each obstacle region consists of 3 cases, according to the variation of number of cameras that can not acquire the vision data. Then, the effects of number of cameras on the proposed robot's vision control scheme are investigated in each obstacle region. Finally, the practicality of the proposed robot's vision control scheme is demonstrated experimentally by performing the robot's point placement task in discontinuous trajectory by obstacle.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2342-2345
• /
• 2005

Robot control system considers various requirements. Firstly, it needs adaptation for unpredictable and dynamic environment. Secondly, it needs way to make do not injurious action to human because live with a person. Thirdly, it needs processing about aim of robots. In this paper proposed that these requirements effective robot control architecture. Robot control architecture can divide Deliberative, Reactive, Hybrid. Recently, robot control architecture that come Deliberative and use hybrid architecture that apply advantage of Reactive architecture is studied much. Hybrid control purpose to combine the real-time response of Reactive with the rationality of Deliberative. Our purpose is enhancement of hybrid architecture that is studied in these days. Proposed architecture that applied human's nervous system can reduce relativity between each module of existent architecture and drive response speed guarantee and safe robot action.

• Journal of Industrial Technology
• /
• v.22 no.B
• /
• pp.251-260
• /
• 2002

In this thesis, a three degrees of freedom robot, which is able to provide sufficient precision for various robot researches, has been developed. The cable mechanism is used as a basic transmission of robot joints. Based on an optimal design strategy, link and joint parameters are determined and then overall geometry of the robot is designed. As an architecture of robot control, real time control system using real time linux and RtiC-Lab(Real Time Controls Laboratory) is developed. This system, written in C and based on Linux O/S, includes text editor, compiler, downloader, and real time plotter running in host computer for developing control purpose. Using these hardware and software, simple PD position control is implemented, the results shows the effectiveness of the system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.969-972
• /
• 1988

A conventional robotic manipulator is usually a very complicated system whose dynamics is too computationally time consuming for dynamic analysis and real time control. The authors have proposed the general design criteria of the robot links which greatly simplify the robot dynamic characteristics. In this paper these design guidelines are applied to a 6 degree of freedom PUMA 560 robot in order to realize actual implementation of the design concept. Based upon the design concept, the dynamic equations of the redesigned robot were derived. Dynamic characteristics of two systems, the ideally designed and conventional robot, are compared with respect to the joint input torque characteristics and degree of the coupling between the robot joints.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.5 s.176
• /
• pp.1155-1165
• /
• 2000

Due to the irregularity of walking ground and the inaccuracy in trajectory control of a leg, the mechanical shock and slip on the ground can be caused in the landing and supporting legs of a walkin g robot, and the robot may lose walking stability. Especially in a jointed-leg type walking robot, those problems are much more severe than in the pantograph type since the leg-weight of the jointed-leg type walking robot is relatively heavier than that of the pantograph type in general. In order to secure the walking stability for the jointed-leg type quadrupedal robot under development in KIST(Korea Institute of Science and Technology), a balancing algorithm consisting of the leg compliance control and the body posture control is implemented in this paper, and the effectiveness of the algorithm is verified through experiments.

• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.97-103
• /
• 2001

This paper presents the development of the I/O Interface for the real time parallel data communication between controller of a six-axis industrial robot(CRS-A460) and an external computer. The proposed I/O Interface consists of the hardware I/O interface and the software that is downloaded to the robot controller and executed by the controller operating system. The constitution of the digital I/O Port for CRS-A460 robot controller and the digital I/O board for IBM-PC are presented as well as the Process Control Program of the robot controller. The developed protocol for the parallel data communication is described. The data communication is tested, and the performance is analysed. In particular, it is shown that the real-time constraint of the robot controller process is satisfied.

• Journal of the Korean Society of Industry Convergence
• /
• v.18 no.1
• /
• pp.10-17
• /
• 2015

We describe a research about remote control of mobile robot based on voice command in this paper. Through real-time remote control and wireless network capabilities of an unmanned remote-control experiments and Home Security / exercise with an unmanned robot, remote control and voice recognition and voice transmission are possible to transmit on a PC using a microphone to control a robot to pinpoint of the source. Speech recognition can be controlled robot by using a remote control. In this research, speech recognition speed and direction of self-driving robot were controlled by a wireless remote control in order to verify the performance of mobile robot with two drives.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.1
• /
• pp.1-5
• /
• 2020

In this paper, a predictive maintenance of the robot trouble using the machine learning method, so called MT(Mahalanobis Taguchi), was studied. Especially, 'MD(Mahalanobis Distance)' was used to compare the robot arm motion difference between before the maintenance(bearing change) and after the maintenance. 6-axies vibration sensor was used to detect the vibration sensing during the motion of the robot arm. The results of the comparison, MD value of the arm motions of the after the maintenance(bearing change) was much lower and stable compared to MD value of the arm motions of the before the maintenance. MD value well distinguished the fine difference of the arm vibration of the robot. The superior performance of the MT method applied to the prediction of the robot trouble was verified by this experiments.

• Journal of Industrial Technology
• /
• v.20 no.B
• /
• pp.195-200
• /
• 2000

This paper describes the path planning method in an unknown environment for an autonomous mobile robot equipped with CCD(Charge-Coupled Device) camera. The mobile robot moves along the guideline. The CCD camera is used for the detection of the existence of a guideline. The wavelet transform is used to find the edge of guideline. It is possible for us to do image processing more easily and rapidly by using wavelet transform. We make a fuzzy control rule using image data as an input then determined the position and the navigation of the mobile robot. The center value of guideline is the input of fuzzy logic controller and the steering angle of the mobile robot is the fuzzy controller output. Some actual experiments show that the mobile robot effectively moves to target position by means of the applied fuzzy control.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1889-1892
• /
• 2002

In this paper, we propose the self-autonomous algorithm for mobile robot system (MRS). The proposed mobile robot system which is learned by learning with the neural network can trace the target at the same distances. The mobile robot can use ultrasonic sensors and calculate the distance between target and mobile robot. By teaming the setup distance, current distance and command velocity, the robot can do intelligent self-autonomous drive. We use the neural network and back-propagation algorithm as a tool of learning. As a result, we confirm the ability of tracing the target with proposed mobile robot.