• Journal of Digital Convergence
• /
• v.14 no.6
• /
• pp.439-448
• /
• 2016

The population over 65 years old is 12.7% of total population in 2014 and Korea is going to be an aged society in the near future. The transportation vulnerable including the aged should be guaranteed in walking mobility under safe and comfortable environment for their socio-economic activities. For the era of fusion and convergence this paper investigated the characteristics of walking accidents related to the aged pedestrians and analyzed the aged-oriented walking factors with a reaction time and a walking speed at crosswalks in Yeosu. In the results, the crashes for the aged occur at 9.9% of total crashes and the fatalities of the aged are 40.3% of total fatalities in 2014. The 47.4% of the aged fatalities is also attributed to vehicle-to-pedestrian accidents. The 49.3% of all pedestrian fatalities occurs at the aged pedestrians with a very high proportion. The reaction time and walking speed for the aged were determined as the values located at the lower 15%-tile of the elderly physical ability. It is shown that the reaction time is 4.56 seconds and the walking speed is 0.76 m/s in the case of Yeosu. From two factors' standpoint, the walking environment at crosswalks in Yeosu is inappropriate for the aged.

• Journal of Wetlands Research
• /
• v.16 no.3
• /
• pp.423-429
• /
• 2014

Due to high imperviousness rates of the roads, various pollutants originated from vehicle activities and air depositions are accumulated on the road surfaces. The washed-off pollutants can deteriorate the water quality and destroy the aqua-ecosystems with their toxicity. Usually the roads are paved with asphalt and concrete, which can affect on the pollutant concentrations with different frictional forces. Therefore, this research is performed to evaluate the influences of different pavement type on discharged concentrations of pollutant. The results shows the first flush phenomenon was occurred on both pavement types. However, peak concentrations are higher in concrete pavement areas than asphalt pavement because concrete pavement has high contact area with vehicles. The EMCs(Event Mean Concentration) also shows high values in concrete paved roads. As a result of this research, it can be concluded the pavement type is also one of the important affecting factors on pollutant emissions from the roads.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.14 no.2
• /
• pp.26-36
• /
• 2015

The new town was assumed that there is a difference between the country's elementary school environment. First, given the important elements of the school safety plan in order to verify this, and we plan to set up each of these elements by safety criteria. In the second chapter in order to achieve the objective of this study was to develop indicators to evaluate the safety of the school environment influences the safety of the school environment through the theoretical consideration. In Chapter 3, the difference in safety through the new elementary school survey of metropolitan areas was given a score per item per item depending on the evaluation criteria. The fourth section is the difference between safety school environment can be summarized as the following analytical results that the difference between the new city. The results of this study as follows: First, the characteristics of the elementary school environment showed a significant difference between the new town. Second, school location, terrain characteristics, bike paths and pedestrian to the installation, the safety of landscape installations, installing median barriers, traffic safety facilities, speed bumps, separation of pedestrian and vehicle circulation in the front door, scores of elements of the plan such as parking scheme there is a difference between the new town. Third, the introduction of elements of the plan such as Traffic calming or Traffic Island installation techniques was found lacking.

• Journal of Digital Convergence
• /
• v.15 no.12
• /
• pp.313-321
• /
• 2017

Traffic accidents in the country have steadily increased. Although IOT technologies have been applied so as to prevent the primary accident, practical solutions to prevent the secondary accident have not been suggested. A general guideline is simply recommended. In this paper, utilizing existing communication technology, we implement a proposed model and its simulation to prevent the secondary accident. When it is possible for a driver to secure visibility, the secondary accident can be prevented; In areas like tunnel, mountain terrain, and curve road with heavy traffic, where the driver has difficulty in securing the visibility, the secondary accident rates after the primary accident have been increasing. Therefore, we implement an accident prevention system that determines the primary accident utilizing sensor technology and prevents the secondary accident communicating through V2V or V2I. After the simulation, we found that the proposed model and the existing model made no difference with regard to the secondary accident rates when the visibility of the driver is secured; With the application of the proposed model, however, the accident rates decreased for 3-7 percent even though the visibility and communication were not secured.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.3
• /
• pp.38-49
• /
• 2015

Seoul has 424 traffic fatalities in 2010 and 227 of them related to pedestrian crashes. In addition, it revealed that 40% of pedestrian fatalities occurred during jaywalking. Through the effective methods preventing jaywalking can save lots of people, and it can reduce social costs pertinent to pedestrian crashes. Therefore, this study is to suggest the methods preventing jaywalking through conducting literature reviews, human factors with pedestrian and vehicle characteristics, as well as geometric features of accident site or spot. Firstly, in order for examining the contributing factors of accident, this research conducts statistical analysis on pedestrian accidents specifically in jaywalking. Secondly, the analysis on human factors about pedestrian and drivers revealed that drivers with high speed play pivotal roles in pedestrian fatalities. Thirdly, Road and environment factors showed both expected and contradictory results through analyzing total numbers of lane or dry/icy pavement conditions. Consequently, this study can be used to prevent and alleviate pedestrian accidents as well as expected to be applied to future researches about pedestrian safety facilities.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.6
• /
• pp.108-117
• /
• 2011

Seoul metropolitan government has been operating traffic signal control system with the name of COSMOS since 2001. COSMOS uses the degrees of saturation and congestion which are calculated by installing loop detectors. At present, inductive loop detector is generally used for detecting vehicles but it is inconvenient and costly for maintenance since it is buried on the road. In addition, the estimated queue length might be influenced in case of error occurred in measuring speed, because it only uses the speed of vehicles passing by the detector. A traffic signal control algorithm which enables smooth traffic flow at intersection is proposed. The proposed algorithm assigns vehicles to the group of each lane and calculates traffic volume and congestion degree using traffic information of each group using VANETs(Vehicular Ad-hoc Networks) inter-vehicle communication. It does not demand additional devices installation such as cameras, sensors or image processing units. In this paper, the algorithm we suggest is verified for AJWT(Average Junction Waiting Time) and TQL(Total Queue Length) under single intersection model based on GLD(Green Light District) Simulator. And the result is better than Random control method and Best first control method. In case real-time control method with VANETs is generalized, this research that suggests the technology of traffic control in signalized intersections using wireless communication will be highly useful.

• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.560-569
• /
• 2019

Purpose: Greenhouse gases are one of the major causes of global warming, a global disaster. This study aims to calculate road sector greenhouse gas emissions more precisely than conventional methods. Method: Currently, the average speed of a vehicle is used to calculate greenhouse gas emissions. In this study, GHG emissions are calculated using the speed of individual vehicles and compared with current methods. Result: It was confirmed that the existing emission estimation method underestimated about 15% in the case of carbon dioxide, about 1% in the case of nitrous oxide, and about 1% in the case of methane. Conclusion: Current methods of estimating greenhouse gas emissions were developed before 2000 and were developed to meet the limits of available data. However, with the advancement of technology, the quality of available data is now high, and new emissions estimation methods are needed. Therefore, in this study, we propose a method for estimating the velocity-based greenhouse gas emissions of individual vehicles as a more accurate method for calculating greenhouse gas emissions.

• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.548-559
• /
• 2019

Purpose: Analysis method of V2I data driven motorway service area usage behavior to cope with manpower survey. Method: Segmentation of traveling state group and boundary using the distribution characteristics of traveling speed data of individual vehicles. Result: As a result of the verification, the use rate of resting places in lunchtime surged, and the boundary between the distribution status of the traffic speed data was clearly or unclear. Conclusion: The effect of the cost reduction is big because it can cope with the use of rest area survey by manpower and there is no limit in the time and space range of investigation. The dynamic utilization rate of each time sequence, such as a service area/drowsiness shelter/simple service area, with a V2I system, can be calculated. Identify illegal parking on highway section. Identify the unexpected situation in the road section. Identify the real-time service area utilization rate and congestion information.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.131-137
• /
• 2010

The stormwater runoff from rest areas in highways are known as more polluted compared to highways because of more vehicle activities. This study is performed to find pollutant characteristics in the rest areas in the magnitude of statistical pollutant concentrations during storms. Washoff characteristics of pollutants from rest areas by monitoring of rainfall, runoff rate and runoff samples were evaluated. High concentrations of pollutants in runoff were observed at the beginning of runoff and rapid decrease thereafter, indicating that first-flush effects are clearly occurred. Event Mean Concentrations(EMCs) of TSS, COD, TN, and TP are estimated to be in the range of 31.04-127.11mg/L, 35.5-369.5mg/L, 2.62-9.86 mg/L, and 0.53-1.96mg/L, respectively. Heavy metals in runoff showed relatively high values, possibly due to the abrasion of brake pad or tire while cars are slowly moving for parking. EMCs of total Pb, total Cu, and total Ni are in the range of $1206-16293{\mu}g/L$, $237-7906{\mu}g/L$, and $53-6372{\mu}g/L$, respectively. Pollutant loading per rest area calculated by using EMC, flowrate and target area is also described for each pollutant.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.89-99
• /
• 2004

The purpose of this study is to evaluate the value of information on Bus-Route concerning on the User's Individual value. The value of information is estimated with the price of time saving by using the information. The price of unit time for each user is applied to convert the saving time to the cost. To estimate the user's expense from origin to destination the previous model is modified. Bus-travel cost is estimated with variables such as bus-travel time, bus-interval, bus-fare, and the price of walking distance. In this study, to estimate in-vehicle time the bus-travel time model is developed based on the spatial characteristics distinguished by three types of circular-road in the network of Daegu Metropolitan area. For the case study, a set of the origin and destination is selected as Dalsu-gu District Office and East Daegu Train Station respectively. There are several bus-routes which can be used as direct or transferable bus-routes selected. The study showed that when the value of time for individual users is \1,738/hr, there is no benefit to using information of transferable bus-routes. It also showed that the more discount rates of bus fare is increased, the benefit to using information of transferable bus-routes is increased, and that the lower value of time is, the benefit to using information of transferable bus-routes is increased.