• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.1
• /
• pp.82-89
• /
• 2024

Black ice is very difficult to recognize and reduces the friction of the road surface, causing automobile accidents. Since black ice is difficult to detect, there is a need for a system that identifies black ice in real time and warns the driver. Various studies have been conducted to prevent black ice on road surfaces, but there is a lack of research on systems that identify black ice in real time and warn drivers. In this paper, an real-time image-based analysis system was developed to identify the condition of asphalt road surface, which is widely used in Korea. For this purpose, a dataset was built for each asphalt road surface image, and then the road surface condition was identified as dry, wet, black ice, and snow using deep learning. In addition, temperature and humidity data measured on the actual road surface were used to finalize the road surface condition. When the road surface was determined to be black ice, the salt spray equipment installed on the road was automatically activated. The surface condition recognition system for the asphalt concrete pavement and black ice automatic prevention system developed in this study are expected to ensure safe driving and reduce the incidence of traffic accidents.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.217-228
• /
• 2009

Sections under the influence of merging in an uninterrupted facility create irregular interaction between vehicles, such as lane change, speed acceleration and deceleration because of the merging of ramp traffic flows which have traffic characteristics different from those of the main line. This causes a confused traffic flow phenomenon(turbulence), which is considered an unstable traffic characteristic between various continuous points in consideration of v conditions. In this study, in merge influence sections, detectors by lane-point were installed to create time and space-series -traffic data. The least significant difference(LSD), as the criteria for discriminating a significant speed change between points, was calculated to examine the turbulence. As a result, turbulence in merge influence section was found to change the zones of such occurrence and the seriousness levels according to traffic condition. Thus, the maximum merge influence section due to the turbulence was created in the traffic condition before congestion when traffic increases. According to characteristics of changes in speed, merge influence section was divided into upstream 100m$\sim$downstream 100m(a section of speed reduction), and downstream 100m$\sim$downstream 400m(a section of reduced speed maintenance and acceleration).

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.833-841
• /
• 2008

Recently, the upheaval generation in the road which is under service had been reported. Due to the upheaval generation, total 4 lanes were forced to curtail to 3 lanes, and traffic was delayed. In normal situation of cut-slopes in korea, that condition is hard to detect since most cut-slopes contain discontinuous material, that is rock. Common collapses in rock-slopes is wedge failure, plane failure and toppling failure which is all individual mechanism of discontinuous rock mass. In contrast, such upheaval in the road in front of cut-slope can be generated only when circular movement is triggered within the cut-slope. In this sense, rock-slopes barely show any kind of movement in the road locates at the front of them. Numerical analysis is general method in simulation of slope displacement and evaluation of safety. However, numerical analysis programs which are related with rock-slopes are not able to simulate such upheaval movement because that programs are based on discontinuous modeling mechanism. In addition, although numerical analysis programs which are based on FEM/FDM and thus utilize continuous modeling mechanism are able to simulate circular movement and upheaval situation, they have weakness in reflecting discontinuities of rock-slope itself. In this study, detailed in-site investigation and numerical analysis based on in-site condition were performed in order to expect upheaval movement in the road. In this procedure, the FLAC program which uses continuous modeling method was utilized, and new approach reflecting discontinuity developed toward the road with a ubiquitous joint model was tried to derive reliable analysis result.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.491-495
• /
• 2008

The effects of vehicles and pavement surface types on noise have been investigated at the Korea Expressway Corporation's Test Road along the southbound side of the Jungbu Inland Expressway, South Korea. The study was conducted in 2005 and 2006 through field measurements at nine surface sections of asphalt concrete and Portland cement concrete pavements using eleven vehicles. For the road noise analysis, the sound power levels (PWLs) of combined noise (e.g., tire/pavement interaction noise and power-train noise together) and tire/pavement interaction noise using various vehicles were calculated based on the novel close proximity (NCPX) and pass-by methods. Then, the characteristics of the PWLs were evaluated according to surface type, vehicle type, and vehicle speed. The results show that the PWLs of vehicles are diversely affected by vehicle speed and the condition of the road surface.

• International Journal of Automotive Technology
• /
• v.7 no.3
• /
• pp.269-276
• /
• 2006

Running tests on roads were conducted to clarify the influences of road infrastructure, traffic condition and vehicle's emission level to the amount of emission at local roadsides, and to reveal the operation patterns which can reduce the emission peaks. NOx emission peaks of two light duty freight diesel vehicles which have different emission levels were evaluated by using an on-board measurement system. Tests were carried out with various payload conditions and road conditions. As a result many NOx emission peaks were observed when the vehicles were starting or accelerating at intersections. The test vehicle which has higher emission level caused higher frequency and level of NOx emission peaks. Shifting up at lower engine speed in combination with lower acceleration brought out not only reduction of NOx emission peaks level but also of $CO_2$ mass emission.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.145-151
• /
• 2009

Current highway design standards is based on the safety under the free flow condition. The length of deceleration lane is also determined in terms of the deceleration distance which is necessary for the driers to adjust the vehicle speed from the speed limit on the main road to that on the exit ramp of the interchange. However, the queues are frequently developed on the deceleration, and the following vehicles to exit must decelerate on the main road. It may cause delay on the main road and traffic accidents. This study is to suggest a methodology to minimize such problems with the shock-wave theory. The queue length of exiting vehicles can be estimated by the design speeds, traffic volumes of main road and the exiting ramp, and the countermeasures to the operational problems. According to the results, the queue length can be shortened to 80% by upgrading the design speed of exit ramp as the amount of 10km/h. Fifty percent of queue length can be shortened by adding an additional lane on the ramp to two lanes.

• Korean Journal of Environment and Ecology
• /
• v.23 no.1
• /
• pp.41-49
• /
• 2009

This research conducted a survey on the feeding crane's size, formation and distribution distance subsequent to road pattern and feeding flock's size during the wintering season eight times at the Cheolwon basin in Korea from December 2005 until February 2006. The survey results are as follows: First, the feeding flocks of the Red-crowned and White-naped Crane were found to mainly consist of two to four individuals. Mono-specific feeding flocks were more identified than hetero-specific feeding flocks in both Red-crowned and White-naped Cranes. There existed a significant difference in the ratio by size between the feeding Red-crowned and White-naped Cranes. The crane's average distribution distance from the paved road was much farther than from the unpaved road, paved farm road and unpaved farm road. In case of the white-naped crane, there was a difference in its distance length from between the road and farm road and there existed a significant difference only in the paved road in the distance length by road pattern between these two bird species[Red-crowned and White-naped Crane]. Such a result indicates that crane species don't prefer the road with frequent vehicular traffic to the road with low vehicular traffic. 5 or more individuals of feeding flocks of the Red-crowned Crane were located at a farther distance length from the paved road comparing to less than 5 individuals of the whole feeding flocks and less than 5 individual feeding flocks. 5 or more individuals of feeding flocks of the White-naped Crane were located at a farther distance length from the paved road, paved farm road and unpaved farm road than less than 5 individuals of feeding flocks of the White-naped Crane; however, there existed no difference in distance length subsequent to their group size. Conclusively, it was found out that the flocks with a larger size were more greatly affected by interrupting factors. Considering such results, there seems to be a more relation to the fact that larger size feeding flocks of crane species have a higher efficiency in the lookout for their surroundings.

• Journal of Korean Society of Transportation
• /
• v.29 no.3
• /
• pp.83-91
• /
• 2011

This paper discusses models for estimating dynamic travel times based on probability theory. The dynamic travel time models proposed in the paper are formulated assuming that the travel time of a vehicle depends on the distribution of the traffic stream condition with respect to the location along a road when the subject vehicle enters the starting point of a travel distance or with respect to the time at the starting point of a travel distance. The models also assume that the dynamic traffic flow can be represented as an exponential distribution function among other types of probability density functions.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.4
• /
• pp.329-337
• /
• 2002

It is the actual condition that the increasing traffic delay and accident caused by inefficient management on various construction by occupying the roadways. Since almost roadway improvements are for the public convenient, negative effects by them are ignored. But now due to the increase of traffics demand and limitation of road supply, the positive management scheme and treatment plan on the constructions must be considered. Thus, to the extent of this study divides uninterrupted flow into freeways and the Highway, yielding the time spread between under construction and not, that is delay time, we build capacity and delay model in the change of traffic volume and occupying length.

• Journal of Korean Society of Transportation
• /
• v.28 no.2
• /
• pp.45-52
• /
• 2010

The objective of this paper is to develop and apply a method that estimates the amount of traffic congestion (vehicle hours of delay) caused by traffic accidents that occur on freeways in Korea. A key feature of this research is the development of a method to separate the non- recurrent delay from any recurrent delay that is present on the road at the time and place of a reported accident. The main idea to separate these two delays is to use the speed difference between speed under accident condition and speed under normal flow condition. For the case study application, two datasets were combined to accomplish the objective of the study: (1) accident data and (2) traffic flow data. Eventually, the results can be useful for the performance evaluation of accident reduction program, for strategic plans to cope with congestion caused by traffic accidents, and for rectification of the estimation method for traffic congestion costs.