• Journal of The Korea Institute of Healthcare Architecture
• /
• v.27 no.1
• /
• pp.17-34
• /
• 2021

Purpose: The purpose of this study was to find out the difference in the priority level of recognition for universal design application in public spaces by gender. Method: ANOVA(analysis of variance) and post-hoc test were conducted to determine the priority level of recognition and pattern for the disabled, non-disabled, and experts classified into males and females. Results: There was no gender difference in the comparison by sector for all males and females. However, in comparing of domains and facilities, women showed a higher level of recognition than men in the building sector and cross domain. When comparing space consumers and producers by dividing them into male and female groups, women showed a higher level of recognition than men in producers, but there was no gender difference between consumers. In comparison by sector, domain and facility, women producers also showed a higher level of recognition in the road sector, park and recreation sector, sidewalk domain, four-spaces in the park and recreation sector, and six-spaces in the building sector than men producers. Also, in the building sector, women producers and consumers showed a higher recognition level than men. Comparing the disabled, non-disabled people and experts by dividing them into male and female groups, in the case of non-disabled people and experts, women showed a higher level of recognition than men, while men showed a higher level of recognition than women in the disabled. In addition, there were differences in recognition patterns in many spaces and facilities by gender. Implications: This study is meaningful in comparing the differences in the priority level of recognition and patterns between men and women to apply universal design for people of all ages and both sexes.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_2
• /
• pp.1567-1577
• /
• 2020

Urban land cover classification is role in urban planning and management. So, it's important to improve classification accuracy on urban location. In this paper, machine learning model, Support Vector Machine (SVM) and Artificial Neural Network (ANN) are proposed for urban land cover classification based on high resolution satellite imagery (KOMPSAT-3A). Satellite image was trained based on 25 m rectangle grid to create training data, and training models used for classifying test area. During the validation process, we presented confusion matrix for each result with 250 Ground Truth Points (GTP). Of the four SVM kernels and the two activation functions ANN, the SVM Polynomial kernel model had the highest accuracy of 86%. In the process of comparing the SVM and ANN using GTP, the SVM model was more effective than the ANN model for KOMPSAT-3A classification. Among the four classes (building, road, vegetation, and bare-soil), building class showed the lowest classification accuracy due to the shadow caused by the high rise building.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.6
• /
• pp.258-265
• /
• 2022

In Korea, the hydraulic model tests for measuring the wave overtopping have been almost conducted with no bottom slope or single slope condition in Korea. In this study, the bottom seabed for the coastal road area was fabricated at the wave flume and the wave overtopping was measured. The overtopping rate was also measured with the numerical modelling by OLAFoam. The measuring data were compared with EurOtop manual. It could be known the the influence of the foreslope in front of the vertical wall was significant and the these effects should be concerned when designing the coastal structures. And also it could be known that OLAFoam could be used to predict the wave overtopping rate for the complex bottom topography.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.7
• /
• pp.25-36
• /
• 2010

Tertiary unconsolidated mudstones spread throughout the eastern coast area. The demand for high quality filling materials in these areas is increasing due to harbors and large-scale residential land development. Rock produced in-situ or near site has been used as road subbase construction or reclamation materials for economical reason, but it is hard to decide appropriateness of quality specification because of its characteristics. The test results showed that unconsolidated rocks are diversely considered according to a different method of the applied geotechnical investigation. Therefore, the site of tertiary unconsolidated mudstones, the classification of rock and evaluation of rock properties that must be evaluated by objective criteria and apply a different set of criteria are needed. In addition, the environmental impact must be considered due to acid mine drainage.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.1
• /
• pp.23-35
• /
• 2009

This study was performed to investigate the bending stresses of tunnel shotcrete as a function of the coefficient of lateral earth pressure. To perform this study, a large scale model tunnel with an one-lane horseshoe shaped road tunnel was prepared. The 3 dimensional numerical analyses were carried out to verify the results obtained from the model tests. For the loading system during the tests, 11 cylinder pressure jacks which can be controlled individually were used to simulate various loading conditions. The tests were preformed three times with three different lateral earth pressure coefficients of 0.5, 1.0 and 2.0. The bending stresses of shotcrete measured in tests were compared and analyzed with those calculated from numerical analyses. As a result, it was found that the bending compressive stresses obtained from numerical analyses were similar to those of tunnel model tests and bending tensile stresses were slightly overestimated during numerical analyses.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.4
• /
• pp.321-328
• /
• 2010

The study performed an actual fire experiment in order to propose the heat release rate of automobile that is the most basic architectural element for the fire safety design in a tunnel, whose importance has been recognized as the underground traffic tunnels are planned in Korean metropolitan cities. The heat release rate of a van is measured by the large scale calorimeter, in which the law of oxygen consumption is applied, and the fire expansion characteristics in a tunnel by placing two passenger cars nearby one another in the tunnel. As the results, the heat release rate of the van was revealed to be 5.9 MW, and carbon monoxide was emitted 482 ppm at a maximum. In case of two passenger car experiment for the fire expansion characteristics, the adjacent car was ignited about 3 minutes 30 seconds after the fire occurrence, and the complete fire was developed after 15 minutes. The maximum heat release was 9 MW. The results from the actual fire experiment can be an important input data for future quantitative analysis as well as an element applicable to a tunnel disaster preventive equipment design.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4D
• /
• pp.587-592
• /
• 2006

The joint sealants used in the airside should resist the high temperature of the jet blast and the jet fuel oil spilled when the aircraft is maintained and filled. The material of joint sealant for the airside should be different from that for the road due to these characteristics. Three different kinds of the joint sealant materials were tested in this paper. The materials include the polysulfide, the polyurethane and the silicon. The test results show that the physical properties and the performance of the polysulfide show the high resistance to the jet blast and the jet fuel oil. When the characteristics of the airside considered, the polysulfide may apply in the both of the runway and the apron area, the polyuretane can be applied the taxiway. The use of the silicon sealant is not recommended for the airside.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6D
• /
• pp.961-968
• /
• 2006

Curbs and L-type gutters installed at the edge of a road are very important structures to protect pedestrians from traffic accidents and to restraint slip of cars due to rain. However, existing construction method where great parts of the construction progress are done by human power has many problems in workability, quality and cost etc. In this paper, a new construction method for improvement in workability and quality for curbs and L-type gutters is developed. In order to investigate the structural safety and quality of curbs and gutters installed by the new method, tensile and lateral load tests are performed on curbs installed by existing and new methods and uniaxial compression tests are also performed on concrete samples of gutters constructed by existing and new methods. The test results show that the alignment of curbs and the strength of gutter concrete are very much improved by applying the new method. The tensile and lateral load capacities of the curbs installed by the new method are 10.7 and 2.5 times higher than those of curbs by existing method, respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3D
• /
• pp.363-371
• /
• 2009

The purpose of this study is to verify the safety issue of the tinted vehicle based on the field study as well as the issue of the capacity reduction from the tinted vehicle. Through this study, an innovative experimental method to verify the issues was developed using RTK GPS receivers, and a data collection was conducted using the developed experimental method. Using the collected data, the effects of the ahead vehicle with the windows tinted on the traffic condition such as headways and acceleration noise were analyzed to test that the ahead vehicle with windows tinted too darkly affects the increasing vehicle maneuver as following the degree of tinting. This study was conducted as a frontier study and more studies, for example, full scale analyses considering various road and vehicle conditions need to be conducted in the future.

• International journal of advanced smart convergence
• /
• v.12 no.4
• /
• pp.386-394
• /
• 2023

This study investigated changes in salivary cortisol, lactic acid, and heart rate along the route during walking exercise in a forest environment for the purpose of reducing stress. Walking exercise in a forest environment was conducted on a Hill Type (Distance: 800m, Average slope 25°, Altitude 112m) and Step Type (Distance: 800m, Average slope 25°, Altitude 114m) routes for 10 female college students in their 20s. The subjects were asked to walk at a speed of 60 bpm. The resulting changes in salivary cortisol, lactate, and average heart rate during exercise were compared and analyzed using Repeated Measurement two-way ANOVA, and the maximum heart rate during exercise and average heart rate at rest were compared and analyzed using paired t-test, and the following results were obtained. First, there was no significant difference in salivary cortisol depending on the type and period of the forest, but it tended to gradually decrease. Second, there was a significant difference in lactic acid depending on the type and period, and it was higher in Step Type. Third, there was a significant difference in the average heart rate during exercise, and it was higher in Step Type. Fourth, there was a significant difference in maximum heart rate during exercise, and it was higher in Step Type. Fifth, there was no significant difference in average heart rate during rest. In summary, walking exercise in a forest environment can be effective for stress reduction for female college students in their 20s, but it appears that forest routes should be selected according to physical strength level, and walking exercise in a forest environment for long periods of time is not recommended. For this purpose, it is suggested that it is appropriate to select the Hill Type route.