• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2023년도 제68차 하계학술대회논문집 31권2호
• /
• pp.673-674
• /
• 2023

도로교통의 안전 확보와 사고 예방을 목적으로 운전자나 보행자에게 필요한 정보를 제공하기 위해 경찰청에서 규격 또는 지침으로 제정하여 노변에 설치되는 교통안전시설 장치는 교통신호정보를 받기 위한 통신선과 함께 장치 구동을 위한 전원선을 개별로 시공해야 하기에 시공 비용의 절감과 함께 다종·다형의 장치에 대하여 통합적인 관제, 확장성, 유연성에 대응할 필요성이 제기되고 있다. 이에 본 논문에서는 이더넷 통신을 기반으로 전원 공급이 하나의 케이블로 가능한 이더넷 전원장치(PoE) 기술과 IoT 프로토콜인 MQTT를 이용하여 다종·다형의 교통안전시설 장치를 통합관제하고, 확장성과 유연성을 가지는 교통안전시설 장치 통합 시스템을 제안한다.

• 한국산림과학회지
• /
• 제104권4호
• /
• pp.615-621
• /
• 2015

본 연구는 산림작업이 지속적으로 이루어진 5개 지방청 8개 경영계획구를 대상으로 조림 및 숲가꾸기 작업에서 임도시설 전 후의 접근성과 산림작업비용의 절감효과를 분석하였다. 분석 결과, 임도 및 공도로부터 500 m 이내의 사업실행 면적이 임도 시설 전 평균 28.5%에서 임도 시설 후 평균 90.3%로 약 3.2배 증가하였으며, 임도 시설에 따른 조림 및 숲가꾸기 작업에서의 산림작업비용 절감효과는 평균 576천원/km/년인 것으로 나타났다. 따라서 임도시설이 원활한 산림작업을 위한 접근성 개선 및 작업비용 절감효과가 있는 것으로 나타났으며, 임도의 시설효과 분석을 통해 임도 확충 정책의 추진을 위한 기초자료의 제공이 가능할 것으로 판단된다.

• 대한교통학회지
• /
• 제33권3호
• /
• pp.237-246
• /
• 2015

도로시설물의 운영 및 유지관리는 기능을 유지하기 위해 반복적으로 이루어지는 온실가스 배출 활동이며, 도로를 계획 및 시공, 운영, 유지보수의 전과정 측면에서 봤을 때 이미 건설된 도로시설물과 신규로 건설하고자 하는 도로시설물에 대해 탄소배출을 줄이기 위한 접근이 용이한 활동이기 때문에 운영 및 유지관리 단계에서 탄소배출량의 정량화는 매우 중요하다. 하지만 도로시설물의 운영 및 유지관리 단계에서의 정량적인 탄소배출량 산정은 분산되어 있는 활동 자료의 수집의 어려움과 탄소배출량 산정 과정의 복잡성을 이유로 정량적인 탄소배출량 산정은 이루어지지 않고 있다. 이에 본 연구에서는 도로시설물의 운영 및 유지보수 단계에서 탄소배출원단위를 산정하였고, 이를 활용해 2012년 기준으로 국내에 건설되어 운영중인 고속국도 및 일반국도에 대해 탄소배출량을 산정하였다.

• 한국군사과학기술학회지
• /
• 제20권2호
• /
• pp.231-237
• /
• 2017

The profile of unpaved road is an important issue in the reliability of endurance test. Efforts on measuring 2D road profile and analyzing the severity have been continued in the study of performing reliable endurance test evaluations through reflecting the results of such measurement and analysis. However, 2D road profile has limitation in measuring the profile in the road width direction because data is obtained along the trailer wheel track. Therefore, in order to measure 3-dimensional shape of road surface and construct severity DB of 3D road profile, Changwon Proving Ground(CPG) of Agency for Defense Development(ADD) developed 3D profilometer which is composed of laser scanner, IMU, GPS, encoder and so on. This paper focuses on the analysis of unpaved road severity using 3D road profile for army operation roads. This results will be used to manage test courses severity of CPG.

• 한국도로학회논문집
• /
• 제19권6호
• /
• pp.117-127
• /
• 2017

PURPOSES : The objective of this research is establishing system components and optimizing operational procedures in order to systematically manage road cave-ins in urban areas. METHODS : Based on the literature review and alternative comparison, optimization methods is suggested. RESULTS : Throughout the study, location referencing system, database structure, and operation strategy(procedure) were clarified, and the optimization methods for each item were suggested. CONCLUSIONS : Road cave-in management should be focused on user safety rather than focusing on economic aspects. The occurrence of road cave-in should be addressed thoroughly by road management system(location referencing system, database structure, and operation strategy(procedure), and the optimization methods), since they are closely related to road users' safety.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.465-471
• /
• 2011

In order to make an feasibility analysis of such as rail and road transportation infrastructure, it is common to perform economic analysis. one of the most important thing is how to estimate the operation cost of freight rail because that is required during the analysis time period and sometimes that takes more cost than the construction cost. Therefore, this study is to perform the verification of freight rail operation cost which is applied to the economic analysis of railway investment analysis. for this, it is compared truck operation cost variation with freight rail operation cost, when freight volume is converted from road to railway. In conclusion the cost variation of railway part is bigger than road part so it is necessary to improve the operation cost of freight rail estimation process.

• 한국도로학회논문집
• /
• 제20권2호
• /
• pp.109-118
• /
• 2018

PURPOSES : This study evaluates the efficiency of snow removal operation resources using data envelopment analysis (DEA). The results of this study can help decision-making strategies, especially for resource allocation for snow removal works on national highways. METHODS : First, regional road management offices (DMUs) for efficiency evaluation were set up, and a database (for years 2012-2016) for analysis was formed. Second, DEA was carried out by selecting input and output variables based on the constructed database. Lastly, based on the results of the DEA, the efficiency of each regional road management office was evaluated. In addition, the potential for future improvement was determined. RESULTS : The results showed that there was a large variation in efficiency of snow removal operation resources by regional offices. CONCLUSIONS : The results of this study imply that the evaluation of efficiency for snow removal operation resources is important when decisions related to snow-removal strategies are made by road management offices.

• 한국도로학회논문집
• /
• 제18권1호
• /
• pp.23-31
• /
• 2016

PURPOSES : This study aimed to offer a greenhouse gases table to assist a road designer in calculating the greenhouse gases for a road environment when making a decision about an alternative road. METHODS : This study developed an operation mode table of greenhouse gases using the MOVES program. Similar factors for Korean vehicles and fuels are reflected in the MOVES program, which was made in the USA. Finally, a paired t-test was conducted to calculate the site data and MOVES data. Through these studies, a methodology was suggested for calculating carbon emissions based on various types of roads alignments. RESULTS : The site results for a passenger truck on the road were statistically significant when the vehicle speed was above 65 km/h. However, a future study will consider factors for various road alignments and vehicles. CONCLUSIONS : This study will contribute to the theoretical basis for reducing carbon emissions from roads by helping road designers make decisions about road alternatives in terms of the road environment.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2765-2770
• /
• 2008

The purpose of tunnel ventilation system for long road tunnels is to keep certain levels of Visibility Index and the concentration of CO. Additional equipments such as jet fans are used in road tunnel to discharge pollutants in the road tunnel. The control algorism of tunnel ventilation system takes the value of sensors as input, and then gives the operation method of jet fans in tunnel as output. Information on the variation of CO concentration in tunnel when jet fans are running is needed to minimize their operation time. Numerical analysis is used in this paper because of the difficulty of conducting experiments under standard condition for ventilation of road tunnel. The concentration of CO has been calculated by using 3-dimensional CFD under transient condition with speed of cars, quantity of air ventilation, and the results for various operation position of jet fans are compared.

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2009년도 추계학술대회 논문집
• /
• pp.697-701
• /
• 2009