• Journal of the Korean GEO-environmental Society
• /
• v.13 no.12
• /
• pp.35-42
• /
• 2012

There are many large-scale coastal region landfill and land development by loading to use territory efficiently, this regions are mostly soft clay ground. Constructing structures and road on the soft ground bring about engineering problems like ground shear fracture and a big amount of consolidation by bearing capacity. Improvement of soft soil is required to secure soil strength and settlement control. In improvement of soft soil, predict for the amount of settlement based on field surveyed reports are important element for estimating pre-loading banking height and the final point of consolidation. In this study, there is calculating theoretical settlement by analyzing field surveyed report and ground investigation to improvement of soft soil with pre-loading and vertical drain method. And present settlement prediction method reflect soil characteristics in Gimpo Hangang site by analysing prediction settlement and observational settlement during compaction using hyperbolic, ${\sqrt{s}}$, Asaoka method.

• Journal of Environmental Impact Assessment
• /
• v.9 no.4
• /
• pp.277-290
• /
• 2000

The purpose of this study is to identify the problems of environmental impact assessment(EIA) and to suggest new EIA technology. The problems of EIA in Korea can be summarized as follows. First, the EIA does not reflect the impact of policy, plan and program on environment. Second, the project EIA does not consider the cumulative impacts such as additive impacts, synergistic impacts, threshold/saturation impacts, induced and indirect impacts, time-crowded impacts, and space-crowded impacts. Third, the EIA techniques in Korea are not standardized. Finally, the present EIA suggests only alternatives to reduce adverse impacts. To solve above-mentioned problems, the development of new EIA technology is essential. First, the new EIA technology should be developed toward pollution prevention technology and comprehensive and integrated environmental management technology. Second, new fields of EIA for pollution prevention contain strategic environmental assessment, cumulative impacts assessment, socio-economic impact assessment, cyber EIA and EIA technology necessary after the reunification of Korean Peninsula. Third, EIA technology for integrated environmental management contains the development of integated environment assessment system and the development of packaged EIA technology. The EIA technology for integrated environmental assessment system contains (1) development of integrated impact assessment technology combining air/water quality model, GIS and remote sensing, (2) integrated impact assessment of EIA, traffic impact assessment, population impact assessment and disaster impact assessment. (3) development of integrated technology combining risk assessment and EIA (4) development of integrated technology of life cycle assessment and EIA, (5) development of integrated technology of spatial planning and EIA, (6) EIA technology for biodiversity towards sustainable development, (7) mathematical model and GIS based location decision techniques, and (8) environmental monitoring and audit. Furthermore, there are some fields which need packaged EIA technology. In case of dam development, urban or industrial complex development, tourist development, landfill or combustion facilities construction, electric power plant development, development of port, road/rail/air port, is necessary the standardized and packaged EIA technology which considers the common characteristics of the same kind of development project.

• International Journal of Automotive Technology
• /
• v.6 no.4
• /
• pp.333-340
• /
• 2005

In order to better quantify the contribution from nonroad sources to emission inventories, it is important to understand not only the emissions rates of these engines but also activity patterns that can be used to accurately portray their in-use operation. To date, however, very little information is available on the actual activity patterns of nonroad equipment. In this study, a total of 18 pieces of nonroad equipment were instrumented with collected data including intake manifold air pressure (MAP), exhaust temperature and, on a subset of vehicles, engine rpm and throttle position. The equipment included backhoes, compactors, dozers, motor graders, loaders and scrappers used in applications such as landfilling, street maintenance and general roadwork. The activity patterns varied considerably depending on the type of equipment and the application. Daily equipment operating time ranged from less than 30 minutes to more than 8 hours, with landfill equipment having the highest daily use. The number of engine starts per day ranged from 3-11 lover the fleet with an average of 5 starts per day. The average percent idle time for the fleet was approximately $25\%$ with a range from 11 to $65\%$ for individual pieces of equipment. Duty cycles based on exhaust temperature/throttle position profiles were also developed for two graders and one dozer.

• Journal of the Korean Society of Radiology
• /
• v.13 no.1
• /
• pp.73-80
• /
• 2019

Neutrons are generated by the nuclear reaction, which is absorbed into the concrete wall and causes the activation during cyclotron operation. The purpose of this study is to investigate the effect of neutron activation and radiative concrete on concrete type. This experiment used Monte Carlo simulation and RESRAD model. The results of the experiment showed that the higher the content of Fe in concrete, the greater the shielding rate. The effect of $^{56}Fe(n,\;2np)^{54}Mn$ reaction on workers is also increased. However, radioactive nuclides have low activity and have very low impact on workers. Radioactive concrete should be treated as general wastes with less than its self-disposal tolerance level, and it should be recycled to the surface such as road repair rather than landfill to minimize the effect of $^{14}C$.

• Korean Journal of Plant Resources
• /
• v.23 no.2
• /
• pp.187-196
• /
• 2010

A total of 10 islands (Kumodo and Komundo in Yeosu City; Oinarodo in Goheung County; Chongsando, Soando, and Pogildo in Wando County; Chodo in Jindo County; Uido, Huksando, and Hongdo in Shinan County) were surveyed to confirm distribution of naturalized plants from June 2006 to December 2008. A total of 100 naturalized plants taxa from 25 families were recorded. The highest number of naturalized plant species (82 taxa) was recorded on Oinarodo, while the lowest number was recorded on Hongdo (42 taxa) and on Uido (34 taxa). A total of 26 naturalized species taxa (such as Dactylis glomerata, Lolium perenne, Bromus unioloides, Rumex obtusifolius, Chenopodium album, Phytolacca americana, Barbarea vulgaris, Lepidium apetalum, Robinia pseudo-acacia, Trifolium repens, Erigeron annuus, Erigeron canadensis, Senecio vulgaris, Xanthium strumarium) was recorded in all study areas. Distribution of naturalized plants were categorized into 7 habitat types based on ecological traits: afforested land, beach, port, and vacant land, road boundary, road cut and slope area, waste arable land, landfill area, and wetland. Systematic management is required to conserve unique landscape, species diversity, vegetation and ecosystem of Dadohae National Park. In order to manage the naturalized plants in Dadohae National Park, basic surveys are most needed to understand distribution and dispersal of naturalized plants communities based on ecological features of each habitat type.

• Journal of Korea Foresty Energy
• /
• v.22 no.2
• /
• pp.1-17
• /
• 2003

Populus species have been as a model species in tree breeding and we have enormous varieties resulting from the poplar breeding because of their fast growth performance and short rotation age. New varieties developed in Korea are common italian poplar(P euramericana, I-214, I-476), P euramericana“Eco 28”(Italian poplar No.1) and p. deltoides“Lux”(Italian poplar No.2), which were introduced from foreign countries. As hybrid polars, Hyun-Sasi(p. alba ${\times}$ P. glandulosa No.1, No.2, No.3, No4.), P. nigra x P. maximowiczii and P. koreana x P. nigra val. italica, were developed, and P. davidiana was selected as the result of selection breeding The total plantation areas covered with the new varieties are 935,162ha that include 745,773ha of P. euramericana, 184,636ha of P. alba x P. glandulosa, and other new varieties are 4,735ha. The new poplars are contributed to increase farmer's income as well as bare land tree-planting in Korea. The technologies associated with the poplar species were developed, such as the determination of optimum site for new the poplar species, the crossing method between incompatible poplar species, and the vegetative mass propagation. In the future, poplar species will be considered for phytoremediation species at contaminated areas such as landfill sites or with lives stock's waste water as well as wood production, a shade tree like road-side tree and public park tree.

• Journal of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.597-607
• /
• 2002

Electric arc furnace and converter slag are produced by about 6 millions tons in Korea at 2000 year. But compared with blast furnace slag, those are utilized only in unvalued material like landfill and road construction. There are unstable materials, like free CaO, in electric arc furnace and converter slag at steel-manufacturing process. This might cause volume expansion in concrete, if electric arc furnace and converter slag aggregates were used in concrete. This expansion may reach to crack or collapse of concrete. It is therefore settled by standard specification for concrete that electric arc furnace and converter slag aggregates have not to use in concrete. First of all, volume stability and stabilized process should be solved in electric arc furnace and converter slag aggregate to use in concrete. In this study, 6 types of aging are evaluated for effects of stabilization to reduce the expansion of electric arc furnace and converter slag. h converter slag aggregate, these types of aging are not good for volume stability for concrete aggregate, and even if converter slag aggregate is treated with aging, concrete with it has some problems that strength is reduced with curing days. But in electric arc furnace slag aggregate treated with hotwater and steam aging, the expansion of electric arc furnace slag aggregate is reduced about two times than that of converter slag aggregate, and electric arc furnace slag aggregate concrete has good results in strength compared with control concrete using crushed stone.