• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.180-180
• /
• 2012

ADCP는 3차원 유속과 수심을 관측하여 유량을 정확하게 계산하는 데 널리 이용되고 있는 최신계측기기로 국내에서도 유량조사사업단 등 기관에 도입되어 수위-유량관계곡선식의 보정 등에 적용되고 있다. 하지만 ADCP 관측값 중 수심관측 자료를 별도로 활용하는 부분도 많은 관심을 받고 있다. 특히 최근 4대강 사업으로 인한 하상변동 측정에 기존 유량관측용으로 구매된 ADCP를 수심관측용으로 활용할 수 있다. ADCP는 일정한 각도로 경사진 4개의 초음파 빔을 활용하여 사선 방향으로 수심을 각각 관측한다. 최근에는 별도의 수심관측용의 수직 빔을 추가 설치하여 한번 관측에 초당 5개 지점의 수심을 동시에 관측할 수 있어 수심관측용으로도 기존 단독빔 음향측심기에 비해 효율적으로 수심을 관측할 수 있다. 그리고 ADCP는 GPS와 연동되어 수심관측의 3차원 공간정보 (x, y, z)를 창출할 수 있어 기존 GIS 자료와 융합될 수 있다. 하지만 기존의 음향 측심기의 수직빔과 다르게 ADCP의 빔이 일정한 각도로 경사져 있고 선박 활용 관측 시 요동에 의해 흔들려 각각의 빔이 계측한 수심의 수평위치를 정확하게 추출하기 어려운 점이 있다. 특히 경사빔에 의한 수심관측지점에 GPS 정보를 추정하여 부여하는 작업도 까다롭다고 하겠다. 그리고 수심관측자료 자체의 오차나 특이점 제거 등의 보정작업을 거쳐야 하는 문제도 있다. 따라서 원자료를 직접 활용할 수 없고 별도의 후처리 과정을 거쳐야 한다. 따라서 본 연구는 이러한 문제를 해결하기 위해 다음의 알고리즘을 개발하였다: 1) 경사빔에 의한 관측지점의 수평위치 산정, 2) ADCP의 흔들림 (피치와 롤링) 보정, 3) 경사빔의 관측위치에 지리정보부여, 4) 수심관측치 오차와 특이점 보정, 5) 관측자료의 GIS 파일 전환. 이러한 알고리즘은 GUI와 연동되어 적용되었으며 편리하게 이용되도록 구성되었다. 그리고 본 연구는 이러한 ADCP의 수심관측 자료와 하천 및 저수지 등 경계 GIS 파일을 연동시켜 전체 혹은 국부 저수량과 하상변동량을 계상하는 알고리즘도 추가하여 관측자료의 실무에서의 활용성을 증대시키고자 하였다.

• Journal of Korea Water Resources Association
• /
• v.30 no.5
• /
• pp.561-570
• /
• 1997

The feature of this paper is (1) to analyze the characteristics of rainfall-runoff relationship with kinematic wave theory, (2) to study the computational model to estimate the sediment yield, (3) to analyze the effects of bed change by transport formulas and the number of watershed division, and (4) to verify the model application with observation of channel data and measurement of rainfall, runoff, sediment discharge in Pyung-Chang River Basin. The calculated time of concentration of peak discharge occured little earlier than the actual, but the tendency of hydrograph coincided with observation. The shape of sediment hydrographs was similar to the water hydrograph. Based on above results, the applicability of the model was verified in detail. As the number of watershed division increased, the difference between the measured runoff and sediment values and the estimated ones decreased. The result of calculation with Yalin's formula for surface and Acker-White's one for channel gave the best agreement with the measured data among the six selected sediment transport foumulas.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.128-128
• /
• 2017

준설(Dredging)은 수중에서의 토사굴착이며, 하천유로의 확장, 항만의 수심증가, 매립이나 축제용의 토사채취 등의 목적으로 행해진다. 하천의 준설은 하천의 흐름 특성 및 제반 여건 변화를 가져오기도 한다. 준설 직후 낮아진 하상으로 수위가 낮아지는 경우가 있는 반면, 수위 저하를 동반하지 않는 경우 준설 부근에서 퇴적이 발생하며 이는 하천의 수위 상승으로 이어 질 수 있다. 또한 퇴적으로 인하여, 최심 하상고가 높아지면 상승정도에 따라 준설 시기를 결정해야 한다. 따라서 본 연구는 SCHISM(Semi-implicit Cross-scale Hydroscience Integrated System Model)모형을 이용하여 이상화 수로에서 준설로 인한 하상변동 후 기존 단면으로 복구되기까지 소요되는 시간과 그에 따른 하천의 수리특성 영향을 검토하였다. SCHISM 수치모형은 Virginia Institute of Marine Science의 Dr. Zhang 교수가 개발한 3차원 수치모의 프로그램으로 현재 중국에서 황허강(Yellow River)의 하상변동 관련 연구를 수행하는데 많이 사용되고 있다. 하천 지형은 이상화 수로로 하천설계기준(2009)을 참고하여 제방 경사는 1:3이며, 수로 제원은 4대강 살리기 사업을 통하여 준설이 실시된 국가하천 자료를 참고하였다. 격자간격은 10 m인 사각격자 이며 모의 시간은 하상변동을 일으키는 유량 개념인 유효유량을 적용하여 60일로 설정하였다. 수치모의를 통하여, 최심 하상고 변화 및 하상변동량을 확인하여 침식 및 퇴적 구간을 구분하였고, 시간에 따른 기준 단면으로의 복구 정도를 유량과 유사량을 변경하면서 민감도 분석을 수행하였다. 향후 본 연구는 하천 준설 계획 시 참고자료로 활용이 가능할 것이며, 준설로 인한 하천수리특성 변화 및 준설시기 결정의 선행연구로써 의미가 있다고 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.21-21
• /
• 2021

효과적인 하천의 유지 및 관리를 위해서는 준설과 각종 수리시설물 영향에 의한 하상변화 양상을 파악하는 것이 필수적이다. 일반적으로 하상변화 분석을 위해서는 하도지형, 하상재료, 유사량 등 현장계측자료가 요구되지만, 대하천 주요 지점이나 정기조사가 이루어지는 일부 지점이 아니라면 하상변화 분석을 위한 현장계측자료가 부족한 실정이다. 따라서 하천을 효율적으로 관리하고 운영하기 위해서는 장래 하상변화 양상을 분석하는데 필요한 충분한 공간적 해상도를 가지는 지형정보와 하상재료 및 유사량 계측자료가 필요하며, 이를 기반으로 중기 및 장기 하상변화를 예측하고 그에 따른 하천관리계획을 수립하게 된다. 본 연구에서는 하도지형 현황자료의 공간해상도가 하상변화의 양적 규모 평가에 미치는 영향을 평가해보고자 한다. 현행 낙동강과 같은 대하천 하도의 하상변동 관련된 조사 및 연구 분석에는 500 m 간격을 기준으로 설정된 기준상의 측선 자료를 이용한다. 본 연구방법으로는 기존 측선을 이용하여 산정된 체적하상변동량과 기준 측선 사이 구간에 대해 측정된 보조측선에 대한 지형정보를 함께 활용하여 산정한 체적하상변동량을 비교함으로써, 하도지형자료의 해상도에 따른 체적변동량 산정결과의 차이와 영향을 평가하였다. 비교를 통해 기존 측선기준 하상변동량 산정치가 실체 하상변동량과 큰 차이를 보일 수 있음을 확인하였다. 따라서 효과적인 하천의 유지 및 관리와 계획 수립을 위해서는 보다 높은 공간해상도의 하도지형자료를 기반으로 한 하상변동 평가 및 분석의 정확도 제고가 필요한 것으로 판단된다. 향후 본 연구 성과를 장래의 하상변화조사의 기초자료로 활용시 상기의 문제점(자료 품질, 추정 자료 사용 등)을 해결하여 모의의 정확성과 정밀성을 제고할 수 있을 것으로 기대되는 바이다.

• Journal of Korea Water Resources Association
• /
• v.43 no.7
• /
• pp.657-666
• /
• 2010

The adjustment processes of mining pits in the disturbed channels by sand or gravel mining were investigated by laboratory experiments in this study. The pit migrated with speed when the river bed was steep. The pit migrated slow and steady when the pit was filling with sand, but the pit migrated with speed after the filling processes was finished. The submerged angle of repose in the pit was nearly constant during the pit was filling. The pit was filled with sand with speed as the channel slope was increased. It took time for the pit to be filled with sand as the pit dimension was increased. This meant that the disturbed channels by sand or gravel mining to adjust the new environment was dependent on the slope of the channels and the dimension of the pits. The dimensionless pit length was short and the dimensionless pit depth was shallow as the time was increased. The dimensionless pit depth was shallow, but the dimensionless pit migration speed was increased as the dimensionless shear velocity and the migration speed of the pit were increased. The dimensionless pit depth was increased with the dimensionless bar migration speed. The shape of the pit was deformed and migrated downstream in accordance with the location and shape of the biased bar front which was developed upstream.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.2
• /
• pp.307-316
• /
• 2019

Development of vegetation in stream channel increases resistance to flow, resulting in increase in river stage upon flood and affecting change in stage-discharge relationship. Vegetation revealed in stream by water level reaching a peak and then declined upon flood is mostly found as prone. Taking an account of flow distribution with the number of vegetation, prone vegetation layer might be at height where discharge rate is zero (0) (Stephan and Guthnecht, 2002). However, there is a tendency that flow rate is overestimated when applying the height of river bed to flow area with no consideration of the height of vegetation layer in flow rate by float measurement. In this study, reliable flow measurement in stream with vegetation was calculated by measuring the height of vegetation layer after flood and excluding the vegetation layer-projected area from the flow area. The result showed the minimum 4.34 % to maximum 10.82 % of flow deviation depending on the scale of discharge. Accordingly, reliable velocity-area methods would be determined if vegetation layer-projected area in stream is considered in flow rate estimation using the flow area during the flood.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.4
• /
• pp.9-18
• /
• 2023

Climate change affects the safety of river revetments, especially those associated with external flooding. Research on slope reinforcement has been actively conducted to enhance revetment safety. Recently, technologies for producing embankment blocks using recycled materials have been developed. However, it is essential to analyze the impact of block shapes on the flow characteristics of exclusion zones for revetment safety. Therefore, this study investigates the influence of revetment block shapes on the hydraulic characteristics of revetment surfaces through 3D numerical simulations. Three block shapes were proposed, and numerical analyses were performed by installing the blocks in an idealized river channel. FLOW-3D was used for the 3D numerical simulations, and the variations in maximum flow velocity, bed velocity beneath the revetment, and maximum shear stress were analyzed based on the shapes of the revetment blocks. The results indicate that for irregularly sized and spaced revetment blocks, such as the natural stone-type vegetation block (Block A), when connected to the revetment in an irregular manner, the changes in flow velocity in the revetment installation zone are more significant than those for Blocks B and C. It is anticipated that considering the topographical characteristics of rivers in the future will enable the design of revetment blocks with practical applicability in the field.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.4
• /
• pp.77-91
• /
• 2011

This study tries to find a streambed scouring and sedimentation characteristics through the Rosgen(1994)'s stream classification system while experiencing several flood events. The Jinwee and Osan streams, the tributaries of Anseongcheon were selected. The streams showed type C or type E. By the classification results, two Type C tributaries one Type C stream and one Type E tributary were selected. For the four selected stream reaches, the analysis of streambed change was implemented by using numerical model CCHE2D (Center for Computational Hydroscience and Engineering). To prepare the inlet boundary conditions of each stream, the WMS (Watershed Modeling System) HEC-1 was used and the streamflows of 50, 80, and 100-year return period were generated and the outlet boundary was set to an open boundary condition. The simulation results showed that when the flood pulse periodically the streambed changes also appears regularly. The results can be used to acquire the basic data for stream restoration.

• Journal of Korea Water Resources Association
• /
• v.44 no.12
• /
• pp.975-990
• /
• 2011

In this study, to develop an assessment method for spatio-temporal riverbed changes, a 1-dimensional model (HEC-RAS) and a 2-dimensional model (CCHE2D) were built and applied. As for the analysis of a riverbed's long-term change in a real stream, three new assessment methods were developed, which are called the "Sediment section cumulative curve", "Sediment section moment", and "Sediment probability distribution function." These methods were used to assess the characteristics of riverbed changes using a consistent valuation standard and to understand changes in quantities intuitively. From the results of this study, sediment characteristics of cross sections can be detected effectively by applying the "Sediment section cumulative curve" method to determine whether there is any sedimentation or erosion in total emission. The amount of sedimentation or erosion occurring in the right or left banks, which divided by center column, could be presented as one criterion by applying the "Sediment section moment" method. This approach could be utilized as an indicator for sediment predictions. Spatio-temporal sediment variables can be presented quantitatively by determining the mean and uncertain boundaries through the "Sediment probability distribution function", and finally, the results can be illustrated for each cross section to provide intuitive recognition.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.4
• /
• pp.45-59
• /
• 2023

The global focus on mitigating climate change has traditionally centered on carbon dioxide, but recent attention has shifted towards methane as a crucial factor in climate change adaptation. Natural settings, particularly aquatic environments such as wetlands, reservoirs, and lakes, play a significant role as sources of greenhouse gases. The accumulation of organic contaminants on the lake and reservoir beds can lead to the microbial decomposition of sedimentary material, generating greenhouse gases, notably methane, under anaerobic conditions. The escalation of methane emissions in freshwater is attributed to the growing impact of non-point sources, alterations in water bodies for diverse purposes, and the introduction of structures such as river crossings that disrupt natural flow patterns. Furthermore, the effects of climate change, including rising water temperatures and ensuing hydrological and water quality challenges, contribute to an acceleration in methane emissions into the atmosphere. Methane emissions occur through various pathways, with ebullition fluxes-where methane bubbles are formed and released from bed sediments-recognized as a major mechanism. This study employs Biochemical Methane Potential (BMP) tests to analyze and quantify the factors influencing methane gas emissions. Methane production rates are measured under diverse conditions, including temperature, substrate type (glucose), shear velocity, and sediment properties. Additionally, numerical simulations are conducted to analyze the relationship between fluid shear stress on the sand bed and methane ebullition rates. The findings reveal that biochemical factors significantly influence methane production, whereas shear velocity primarily affects methane ebullition. Sediment properties are identified as influential factors impacting both methane production and ebullition. Overall, this study establishes empirical relationships between bubble dynamics, the Weber number, and methane emissions, presenting a formula to estimate methane ebullition flux. Future research, incorporating specific conditions such as water depth, effective shear stress beneath the sediment's tensile strength, and organic matter, is expected to contribute to the development of biogeochemical and hydro-environmental impact assessment methods suitable for in-situ applications.