• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.335-339
• /
• 2024

Employees of nuclear medicine facilities performing medical procedures with the use of open radioactive sources require continuous detailed control of exposure to ionizing radiation. Thermoluminescent (TL) detectors placed in dosimeters: for the whole body, for lenses, ring and wrist dosimeters were used to assess exposure. The highest whole-body exposure of (1.70 ± 1.09) µSv/GBq was recorded in nurses administering radiopharmaceutical to patients. The highest exposure to lenses and fingers was recorded for employees of the quality control zone and it was (8.08 ± 2.84) µSv/GBq and a maximum of (1261.46 ± 338.93) µSv/GBq, respectively. Workers in the production zone received the highest doses on their hands, i.e. (175.67 ± 13.25) µSv/GBq. The measurements performed showed that the analyzed workers may be classified as exposure category A. Wrist dosimeters are not recommended for use in isotope laboratories due to underestimation of ionizing radiation doses. Appropriately selected shields, which significantly reduce the dose received by employees, must be used in isotope laboratories. Periodic measurements confirmed that the appropriate optimization of exposure reduces the radiation doses received by employees.

• Journal of Preventive Medicine and Public Health
• /
• 제39권6호
• /
• pp.505-510
• /
• 2006

Objectives : The purpose of this study is to evaluate the association of the angiotensin converting enzyme (ACE) insertion/deletion (I/D) polymorphism with cardiovascular disease risk factors. Methods : Out of a total of 608 middle-aged adults who visited local health centers, 424 subjects (104 male, 320 female) who had not been diagnosed with hypertension, diabetes mellitus, or hyperlipidemia were included in this study. ACE genotypes were determined in all subjects by polymerase chain reaction methods. Results : Statistical differences in high-density lipoprotein (HDL) cholesterol levels according to ACE genotype were observed using ANOVA (p<0.05), but no differences were found in other cardiovascular risk factors. Specifically, men with the DD and DI genotypes had significantly lower HDL cholesterol levels than those with the 11 genotype based on the LSD multi-comparison test (p<0.05). Conclusions : In men, the D-allele of the ACE I/D polymorphism was significantly associated with reduced HDL cholesterol levels. In the future, larger studies are needed to confirm this relationship between ACE I/D polymorphism and HDL cholesterol.

• 한국산업보건학회지
• /
• 제6권2호
• /
• pp.292-300
• /
• 1996

Hexavalent chromium($Cr^{+6}$) compounds are considered to be particularly hazardous, primarily because of the associated risk of allergic reaction and cancer. The analytic method of hexavalent chromium such as the s-diphenylcarba-zide(DPC) method and all ether previously used methods are often made uncertain due to significant interferences from organic components. This report can provide a technique for the more rapid and simple determination of total hexavalent chromium. than other currently using methods. The s-diphenylcarbazide method proposed by the U.S. National Institute for Occupational Safety and Health has low recovery rate(15.67 - 48.20%) due to interference, iron chloride and nickel chloride. A microwave oven technique has high recovery rate(about 70%) of insoluble hexavalent chromium. For the difference of ionic charges of $Cr^{+3}$-ethylenediamine tetraacetic acid(EDTA) chelate and $CrO_4{^{-2}}$, we could detect them simultaneously by ion exchanged high performance liquid chromatography. The confirmation of $Cr^{+3}$ and $Cr^{+6}$ were checked by fraction collector and flameless atomic absorption spectrometer. We observed that the small amount of hexavalent chromium is converted to trivalent chromium due to enhancement of chromium reduction by $Fe^{+3}$ or $Ni^{+2}$. As a result of this study, on the analysis of insoluble hexavalent chromium with microwave oven was used for, it may be better and more precise analysis after pretreatment by 2% NaOH-3% $Na_2CO_3$ and then analysis UV-spectrophotometer. It should be done for various studies on insoluble hexavalent chromium on the basis work environmental monitoring so called welding, painting etc.

• Journal of Preventive Medicine and Public Health
• /
• 제29권3호
• /
• pp.617-637
• /
• 1996

Occupational dermatosis is one of the most prevalent occupational disorders. However, the extent of the occupational dermatoses including incidences and prevalencies of each disease entity, and etiologic materials are not yet welt stated in Korea. Authors reviewed the literatures on the statistic data and reports on the occupational dermatoses, and surveyed on the occupational dermatoses in two factories, and surveyed the physicians responsible to the occupational dermatoses with formed questionnaire. The results are as follows; 1. Among medical journals published since 1964, there were 31 articles on the occupational dermatoses. Of 31 articles, 18 were case reports and all others were review articles. Of 18 case reports, 9 were epidemiologic survey. The Workers' Periodic Health Examinations revealed that prevalence of the occupational dermatoses was highest(4.36 per 10,000 workers) in 1974, but number of the cases reported were decreased sharply since 1978 with some tendency to increase since 1981. There were 2,240 reported cases of occupational dermatoses between 1966 and 1992, which is 1.90% of all the reported occupational diseases. Skin infection and injuries due to chemicals were most frequent and there were 6 cases of skin cancer. 2. In an epidemiological survey on the dermatoses among 995 workers in a metal product manufacturing factory and 225 workers in a coal chemical factory, there were 794 with dermatomycosis, 296 workers with acne, 130 workers with scar, 123 workers with deformity of toe nails. Scars, photosensitivity dermatitis, deformity of finger and toe nails, and acne were more prevalent in the metal product manufacturing factory(p<0.05). In the metal prouct manufacturing factory, workers treating organic solvents and oils had more dermatoses than those without treating the materials(p<0.05). On the skin patch performed on 16 workers in the metal product manufacturing factory, there were 8 cases of irritation dermatitis and 5 cases of contact dermatitis. Prevalence of contact dermatitis in the metal product manufacturing factory was 1.3%. 3. On the questionnaire survey, 34 dermatologists, 29 doctors of preventive medicine, and 22 family physician replied. The proportion of occupational etiology among all dermatoses assumed by the physicians were below 9%, and the most important occupational dermatosis in Korea was contact dermatitis. Main etiologic materials related to the occupational dermatosis were organic solvent, acid and alkali, and metals. The reason for the scarcity of report of occupational dermatoses were difficulty in diagnosis and physician's ignorance of the occupational etiology. They replied that to prevent the occupational dermatoses in the workplace, the use of protective devices was most important, and development of diagnostic criteria on the occupational dermatoses is urgent. Above results shows us that there is many workers with occupational dermatoses, but they are mostly unreported. Measures to prevent and manage the occupational dermatoses are not satisfactory at present. Hence, authors suggest measures for the precise diagnosis, report and prevention of the occupational dermatoses. a. Dermatologist, preventive physician, and industrial hygienist should work as a team to examine the high risk group and establish the preventive measures. b. Disease entities, diagnostic criteria of occupational dermatoses should be listed, criteria for the compensation and job fitting at recruitment should be established, and manual for the proper treatment and effective prevention of each occupational dermatosis should be developed. c. Patch test antigens against each occupational category should be developed and it should be available to any physicians responsible. d. To facilitate the diagnosis of occupational dermatoses by the doctors responsible for the Workersr Periodic Health Examination, development of standardized questionnaire, education on the techniques of the patch test, and cooperation with the dermatologist in diagnosis of occupational dermatoses is essential.

• 대한두개안면성형외과학회지
• /
• 제21권5호
• /
• pp.315-318
• /
• 2020

Side effects of tattoos can occur due to unexpected body responses. Concerns about the side effects of tattoos are growing concomitantly with the increasing number of tattooed individuals. We report a rare case of basal cell carcinoma (BCC) on a tattooed eyebrow. A 48-year-old woman with no family history or occupational risk of skin cancer had her eyebrows tattooed 6 years prior, and she noticed a black mass on her right eyebrow 1 year before presentation. Staged excision was planned due to the patient's reluctance regarding the possibility of a wide scar. After the first surgical procedure, a histopathological examination confirmed BCC. Wide excision and primary closure were performed for remnant BCC, and no recurrence was observed. The mechanism of skin neoplasms involving tattoos has not been clearly identified. Unapproved tattoo inks contain carcinogenic substances, and previous case reports indicate that skin neoplasms may differ depending on the tattoo color. Therefore, the carcinogenic effects of these unknown components of tattoo ink might cause skin neoplasms. Accurate component analysis and systematic management of tattoo ink is necessary, and medical practitioners must also pay attention to this possibility because it is easy to overlook tattoos as a causal factor contributing to cancer.

• 한국산업보건학회지
• /
• 제32권4호
• /
• pp.381-392
• /
• 2022

Objectives: Objective of this study is to review briefly exposure characteristics, monitoring instruments and threshold limit values for extremely low frequency-magnetic field (ELF-MF) methods. This study was undertaken through brief literature review. We performed a literature search in PubMed to identify ELF-MF studies conducted in workplaces. Initial search keywords such as 'extremely low frequency-magnetic field (ELF-MF)' and 'electromagnetic fields (EMF)' combined or singly. We limited our review to occupational rather than general nonworkplace environmental exposures. Methods: The contents we reviewed: key industry and occupations generating ELF-MF, several direct-reading instruments monitoring ELF-MF and threshold limit values (TLV) preventing health effects may be caused by the exposure to ELF-MF. Results: The industries related to the generation and supply of electricity, electrolytic installations, welding, and induction heating and more were regarded as high ELF-MF exposure industries. All jobs handling or employed performed in power cable lines, electrical wiring, and electrical equipment are found to be exposed to ELF-MF. Threshold or ceiling limit, 1,000 µT, is established to prevent acute effects of exposure to low-frequency EMFs on the nervous system: the direct stimulation of nerve and muscle tissues and the induction of retinal phosphenes. The International Agency for Research on Cancer (IARC) has classified ELF-MF as possibly carcinogenic to humans chiefly based on epidemiological studies on childhood leukemia. However, a causal relationship between magnetic fields and several types of cancer including childhood leukemia has not been established nor has any other long-term effects. Risk management using precautionary measures, has been initiated by the US and EU to prevent chronic health effects related to ELF-MF exposure in workplaces. Conclusion: This study recommends the implementation of various measures such as theestablishment of occupational exposure limit values for ELF-MF and precautionary principle to prevent potential chronic occupational health effects may be caused by ELF-MF in Korea.

• Journal of Preventive Medicine and Public Health
• /
• 제47권5호
• /
• pp.253-257
• /
• 2014

Arsenic is a ubiquitous, naturally occurring metalloid that may be a significant risk factor for cancer after exposure to contaminated drinking water, cigarettes, foods, industry, occupational environment, and air. Among the various routes of arsenic exposure, drinking water is the largest source of arsenic poisoning worldwide. Arsenic exposure from ingested foods usually comes from food crops grown in arsenic-contaminated soil and/or irrigated with arsenic-contaminated water. According to a recent World Health Organization report, arsenic from contaminated water can be quickly and easily absorbed and depending on its metabolic form, may adversely affect human health. Recently, the US Food and Drug Administration regulations for metals found in cosmetics to protect consumers against contaminations deemed deleterious to health; some cosmetics were found to contain a variety of chemicals including heavy metals, which are sometimes used as preservatives. Moreover, developing countries tend to have a growing number of industrial factories that unfortunately, harm the environment, especially in cities where industrial and vehicle emissions, as well as household activities, cause serious air pollution. Air is also an important source of arsenic exposure in areas with industrial activity. The presence of arsenic in airborne particulate matter is considered a risk for certain diseases. Taken together, various potential pathways of arsenic exposure seem to affect humans adversely, and future efforts to reduce arsenic exposure caused by environmental factors should be made.

• 대한예방의학회:학술대회논문집
• /
• 대한예방의학회 2002년도 제54차 추계 학술대회 연제집
• /
• pp.354-355
• /
• 2002

• 한국산업보건학회지
• /
• 제26권1호
• /
• pp.58-63
• /
• 2016

Objectives: One major limitation encountered in retrospective exposure assessment for epidemiological study is the lack of exposure records and information maintained by companies which if they existed would allow the estimation of past exposure to hazardous operations and agents. This study developed a job-specific questionnaire(JSQ) to estimate exposure profiles among semiconductor workers, including operation and job. Methods: This JSQ can be directly applied to workers who work or have worked in a wafer fabrication or a chip packaging and assembly facility. Results and Conclusions: We used this JSQ to obtain past exposure information from semiconductor workers via face-to-face investigation. Major contents include questions on the facilities, operations and jobs to which they have been exposed since they entered employment in the semiconductor industry. The total number of questions in the JSQ is 18. Responses to this JSQ can be used not only to estimate retrospective exposure to operations and jobs in the semiconductor industry, but also to associate with the risk of all causes of death and risk of disease, including cancer.

• Safety and Health at Work
• /
• 제4권1호
• /
• pp.27-36
• /
• 2013

Objectives: Mental health has been shown to be linked with certain underlying physiological mechanisms. The objective of this cross sectional study was to investigate the relationship between depressive symptoms and brachial artery reactivity (BAR) in an understudied population: police officers. Methods: Participants were 351 police officers who were clinically examined in the Buffalo Cardio-Metabolic Police Stress (BCOPS) study. BAR was performed using standard B-Mode ultrasound procedures. Depressive symptoms were measured using the Center for Epidemiological Studies Depression (CES-D) scale. Mean values of the difference between the baseline and maximum diameters of the brachial artery were determined across three categories of CES-D score using the analysis of variance and the analysis of covariance. p-values for linear trends were obtained from linear regression models. Results: The mean age (${\pm}$ standard deviation) of all officers was $40.9{\pm}7.2$ years. Women had a slightly higher mean CES-D score than men ($8.9{\pm}8.9$ vs. $7.4{\pm}6.4$) and a slightly higher percentage increase of BAR than men (6.90 vs. 5.26%). Smoking status significantly modified the associations between depressive symptoms and BAR. Among current smokers, mean absolute values of BAR significantly decreased as depressive symptoms increased after adjustment for age, gender, race/ethnicity, hypertension, and diabetes; the multivariate-adjusted p-values were 0.033 (absolute) and 0.040 (%). Associations between depressive symptoms and BAR were not statistically significant among former smokers or never smokers. Conclusion: Depressive symptoms were inversely associated with BAR among police officers who were current smokers and together may be considered a risk factor for cardiovascular disease among police officers. Further prospective research is warranted.