• Journal of Korea Water Resources Association
• /
• v.56 no.10
• /
• pp.667-678
• /
• 2023

In this study, quasi-3D inundation flow simulations were conducted for a simplified subway station configuration. The effects of variations in rainwater inflow locations and discharge were investigated, analyzing the resulting inundation flow patterns and flood risk. The inundation simulation results calculated the incipient velocities for slipping and toppling accidents to assess pedestrian safety. The results indicated that velocities exceeding the incipient velocity for slipping accidents mainly occurred on the flooded staircase. Meanwhile, velocities surpassing the incipient toppling accidents were observed around the staircase and the corridor near the staircase leading to B2F. This observation is consistent with the results from the specific force distribution analysis. To provide detailed flood risk assessments, the Flood Hazard Degree (FD) was applied with four levels of criteria, along with the Flood Intensity Factor (FIF). The results demonstrated that FD identified a broader area at risk of flood-induced consequences compared to FIF. When comparing the different inundation risk assessment methods, the specific force method tended to overestimate the risk area, whereas FIF tended to underestimate it. Furthermore, among all assessment methods, the influence of rainwater discharge was found to have a more dominant effect on flood risk assessment compared to the number of rainwater inflow locations. Additionally, the direction of inundation flow influenced the assessed risk, with collision-induced flow patterns leading to higher flood risk than those with identical flow directions.

• Journal of Korean Society of Transportation
• /
• v.33 no.5
• /
• pp.478-487
• /
• 2015

This study proposed a Variable Speed Limits(VSL) algorithm to use traffic information based on Cumulative Demand-Capacity Analysis and evaluated its performance. According to the analysis result, the total of delay consisted of 3 separate parts. There was no change in total travel time although the total of delay decreased. These effects was analysed theoretically and then, evaluated through VISSIM, a microscopic simulator. VISSIM simulation results show almost same as those of theoretical analysis. Furthermore in SSAM analysis with VISSIM simulation log, the number of high risk collisions decreased 36.0 %. However, the total delay decrease effect is not real meaning of decrease effect because the drivers' desired speed is same whether the VSL model is operated or not. Nevertheless this VSL model maintains free flow speed for longer and increases the cycle of traffic speed fluctuation. In other words, this is decrease of delay occurrence and scale. The decrease of speed gap between upstream and downstream stabilizes the traffic flow and leads decrease number of high risk collision. In conclusion, we can expect increase of safety through total delay minimization according to this VSL model.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.07a
• /
• pp.100-102
• /
• 2015

In recent years, using a smart phone that can access the Internet becomes routine in society through development of information and communication technology. On land, as especially actual accidents and research results show risk that using the smart phone while driving at the same time, and there are traffic laws and regulations that restriction of using of smart phone. But the regulations on the use of smart phones at sea is incomplete state. On this paper. We invested present status of use and reality of smart phone at sea and analyzed the subjective risk for judging to apply to regulation. And we analyzed risk quantitatively by using the simulation experiment; it Suggested a direction of guideline for use of smart phone at sea.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.5
• /
• pp.363-375
• /
• 2015

Objective: This study aims to recognize the risk of current traffic systems and to investigate a method to decrease risk by doing exercise using an elastic-band and cognitive rehabilitation. Background: The existing traffic system usually focuses on the ordinary citizens, which may not be appropriate to the elderly. It may affect the cognition and walking speed of the elderly. This study tries to examine whether cognition and muscle training is appropriate to improve their vulnerability. Therefore this study will provide human ergonomics - based basic data in relation to the elderly to identify the risk of current signal system and to mitigate the risk. Method: A total of 30 elderly participants were divided into two groups: experimental and control groups. Experimental group (n=15) was trained to strengthen their muscles and to promote cognition, whereas control group (n=15) was not. The training was conducted twice a week for three weeks. To strengthen muscles, a yellow colored elastic-band was used, and a computer program for cognitive rehabilitation was used to develop cognition. In the experimental group, there were significant differences between pre and post exercises However, the control group didn't show any significant difference. The increase in cognition and walking speed was found in the experimental group, whereas there were no differences in the control group. Statistically there was no significant difference between the two groups. Results: The results of this study show that the exercise program using the elastic-band gave a positive effect on gait training thanks to the development of muscle power and balance. Conclusion: This study did not show any statistical difference or significant differences between the two groups, since time was restricted, we believe. Application: The results of the walking speed will help to prevent traffic collision.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.863-869
• /
• 2018

Due to recent changes in the maritime traffic environment, naval warship accidents are constantly occurring. Especially in 2017, serious loss of life was caused by a US navy destroyer accident. The purpose of this study is to analyze the characteristics of naval warship accident cases and construct an accident scenario by using naval training materials, adjudication of naval warship accidents and US navy destroyer accident reports. Based on the surveyed data, the status of accidents was identified and cases were analyzed. We reproduced 17 accident cases in accordance with accident reproduction procedure and constructed naval warship accident scenarios. As a result of analyzing the CPA, TCPA and PARK model for risk, reproducing 17 naval ship accident cases, collision risk increased on average 5-6 minutes before an accident. The result of this study represents basic data for naval and simulation education materials, contributing to the prevention of marine accidents.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.843-850
• /
• 2020

The purpose of this study is to evaluate the structural risk and weakness of a railway tank car through nonlinear collision analysis according to overseas collision safety standards. The goal is to propose a crash safety design guideline for railway tank cars for transporting dangerous goods in Korea. We analyzed the buffer impact test procedure of railway freight cars prescribed in EN 12663-2 and the tank puncture test criteria prescribed in 49CFR179. A nonlinear finite element model according to each standard was modeled using LS-DYNA, a commercial finite element analysis solver. As a result of the buffing impact test simulation, it was predicted that plastic deformation would not occur at a collision speed of 6 km/h or less. However, plastic deformation was detected at the rear of the center sill and at the tank center supporting the structure at a collision speed of 8 km/h or more. As a result of a head-on test simulation of tank puncture, the outer tank shell was destroyed at the corner of the tank head when 4% of the kinetic energy of the impacter was absorbed. The tank shell was destroyed in the area of contact with the impacter in the test mode analysis of tank shell puncture when the kinetic energy of the moving vehicle was reduced by 30%. Therefore, the simulation results of the puncture test show that fracture at the tank shell and leakage of the internal material is expected. Consequently, protection and structural design reinforcement are required on railway tank cars in Korea.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.2
• /
• pp.58-76
• /
• 2019

As the number of reported injuries has tended to increase over time, large hospitalization expenditure from excessive medical treatments and hospitalization, and insurance frauds associated with moral hazard in minor collisions have caused a global societal problem. Many occupants of rear-ended vehicles involved in rear-end collisions complain of whiplash injury, which is also known as neck injury, without any anatomical and radiological evidence. With only clinical symptoms, stating that a whiplash injury is a type of injury defined by the Abbreviated Injury Scale would be difficult. Therefore, this study focuses on minor rear-end collisions, where the rear-ender vehicle collides with the rear-ended vehicle at rest. The mathematics dynamic model is employed to simulate a total of 100 rear-end collision scenarios based on various weights and collision speeds and identify how the weights and speeds of both vehicles influence the risk of whiplash injury in occupants involved in minor rear-end collisions. The possibility of an injury is very high when the same-weight vehicles are involved in accidents at collision speeds of 15 km/h or higher. The possibilities are 36% and 84% with collision speeds of 15 km/h and 20 km/h, respectively, if weights are disregarded.

• Journal of Navigation and Port Research
• /
• v.36 no.9
• /
• pp.721-728
• /
• 2012

Marine traffic safety of the Vung Tau Waterway, from port limit to Ganh Rai Gulf, plays a crucial role in the economic development of the important triangular economic zone in the south of Vietnam: Ho Chi Minh City, Dong Nai Province, Ba Ria-Vung Tau Province. This paper uses the IWRAP Mk2 program to assess marine traffic safety and shows that in the area there are three parts of fairway have highest risk of collision (from buoys No. 8-9 to buoys No. 1-2 of the Song Dinh fairway; from buoy No. 0 to buoys No. 8-9 and from buoys No. 6-9 to buoys No. 8-9A of the Sai Gon-Vung Tau fairway) and the two areas have highest risk of grounding (the Vung Tau coastline from Ganh Hao to Sao Mai and an area in the Ganh Rai Gulf). In addition, the result of a questionnaire survey on a group of Pilots shows that wind, current and rain/fog have considerable negative effect to ship handling of large vessels in this area. This paper's results will be used in the further research to discover solutions for improving marine traffic safety in the Vung Tau Waterway.

• Journal of the Korean Society of Safety
• /
• v.37 no.4
• /
• pp.1-10
• /
• 2022

The purposes of this study were to suggest 1) a future direction for Korea's machine tool industry and 2) how to secure the safety and reliability of emerging intelligent or automated machine tooling. The study concludes that, overseas, the machine tool industry is growing again while promoting innovation by converging with ICT. Accordingly, Korea also promotes ICT innovation to advance the machine tool industry, which is at the core of the national economy. As a result, unlike in the past, the frequency of serious injuries like entrapment accidents has recently decreased, while the proportion of collision accidents has increased. In addition, a new type of accident has become possible. Since ICT is network-based, the distinction between work and rest can become ambiguous; there is a risk of hacking, working hours and places are flexible and there are risk factors for diseases like chronic fatigue due to overload of specific personnel. As robots and automation are introduced, there is also a high probability of problems caused by physical and psychological burdens on system operators and resulting fatigue.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.2
• /
• pp.99-106
• /
• 2004

Train control system in LRT (Light Rail Transit) is developed as a part of "Light Rail Transit System Development Project". But there was no specific requirement representing the system safety. Because system safety must be ensured before the customization, we applied the system to a officially recognized specific procedure, such as "A Guideline to Ensure the Safety of Train Control System in Korea" that was officially announced by KNR (Korea National Railroad) in 2001. We should draw system safely requirement to guarantee system safety for the first time. In this paper, the hazard identification and analysis to derive the safety requirement on LRT train control system are carried out following the KNR guideline. To analyze hazard, we have to deduce system functions, identify related hazards, derive the effects of the hazards, analyze current risk, define the target risk of the system, and deduce the alternative plans to reduce the effects of the hazards. After the hazard analysis following the upper procedure, 30 hazards are identified and analysed. Especially detailed analysis on train collision that is a main hazard of the train control of system is specially carried out.