• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.10
• /
• pp.217-230
• /
• 2012

This paper propose interacting test programming methods between test equipment and hardware unit to verify function and performance of the hardware unit under test. Proposed test program can minimizes the risk of failures when the unit is mounted on the aircraft by testing and verifying the unit under the worst stress condition. Also, Object oriented design using UML make it easy to apply in other equipments. Test program consists of architecture package and hardware package. Architecture package is in a role for system management, log analysis, message receiving and message analysis. Messages that are used by system management define messages for testing and defined messages is sent and received to test equipment through Ethernet. Hardware package is in a role for hardware management that is needed to be tested and is related to a system. Hardware to be tested is divided into internal test and transmission test. Internal test inspects hardware itself and reports the test results to the test equipment. Transmission test inspects communication device by sending or receiving data. All kinds of test is done in the worst condition of the test unit executing in parallel. Each device is tested at least 482 times and at most 15,003 times about one hour. Test program is utilized in hardware reliability test like as environmental test or EMI test.

• Journal of Korea Water Resources Association
• /
• v.47 no.11
• /
• pp.1051-1060
• /
• 2014

This study is attempted to realize an improved computation performance by combining the MPI (Message Passing Interface) Technique, a standard model of the parallel programming in the distributed memory environment, with the DHM(Diffusion Hydrodynamic Model), a inundation analysis model. With parallelizing inundation model, it compared with the existing calculation method about the results of applications to complicate and required long computing time problems. In addition, it attempted to prove the capability to estimate inundation extent, depth and speed-up computing time due to the flooding in protected lowlands and to validate the applicability of the parallel model to the actual flooding analysis by simulating based on various inundation scenarios. To verify the model developed in this study, it was applied to a hypothetical two-dimensional protected land and a real flooding case, and then actually verified the applicability of this model. As a result of this application, this model shows that the improvement effectiveness of calculation time is better up to the maximum of about 41% to 48% in using multi cores than a single core based on the same accuracy. The flood analysis model using the parallel technique in this study can be used for calculating flooding water depth, flooding areas, propagation speed of flooding waves, etc. with a shorter runtime with applying multi cores, and is expected to be actually used for promptly predicting real time flood forecasting and for drawing flood risk maps etc.

• Journal of the Korean Society of Safety
• /
• v.30 no.1
• /
• pp.14-20
• /
• 2015

A Large Eddy Simulation(LES) was performed for the prediction of unsteady dispersion behavior of hydrogen fluoride (HF). The HF leakage accident occurred at the Gumi fourth industrial complex was numerically investigated using the Fire Dynamics Simulator (FDS) based on the LES. The accident area was modeled three-dimensionally and time-varying boundary conditions for wind were adopted in the simulation for considering the realistic accident conditions. The Message Passing Interface (MPI) parallel computation technique was used to reduce the computational time. As a result, it was found that the present LES simulation could predict the unsteady dispersion features of HF near the accident area effectively. The dispersion behaviors of the leaked HF was much affected by the unsteady wind direction. The LES could predict the time variation of the HF concentration reasonably and give an useful information for the risk analysis while the prediction with the time-averaging concept of HF concentration had a limitation for the amount of HF concentration at specific location point. It was identified that the LES is very useful to predict the dispersion characteristics of hazardous chemicals.

• Journal of the Ergonomics Society of Korea
• /
• v.23 no.2
• /
• pp.105-120
• /
• 2004

With the new technology and the popularization of mobile phone. the functions and designs of mobile phone have been varied rapidly. However. based on the user's level of familiarity on mobile phone function and knowledge of information technology. the using behaviors of mobile phone. especially between the young users who are well acquainted with the latest function and technology and the over middle-aged users who are relatively not. would be quite different. A survey was conducted to investigate the various using behaviors of mobile phone in different age groups. The total number of six hundred and sixty-seven people from age seventeen to sixty participated in this study. The participants were divided into young group (age between 17 to 29) and the over middle-aged group (age between 40 to 60) to compare the difference group considered design. price. and function of the mobile phone as three important factors. on the other hand. the over middle-aged group considered quality of communication. price and ease of use as three important factors. All the respondents of the young group know how to use the text messaging function. however for the over middle-aged group. 40% of the respondents knows how to use the text messaging function. The over middle-aged group seemed mainly use the mobile phone for voice communication. however the young group had a tendency to communicate each other with short text message rather than through voice conversation. Twenty percentage of young group responded that they had an experience of pain or discomfort at the thumb. the thenar eminence area. or carpus area during pushing the mobile phone keypad. The excessive frequent use of keypad may cause the risk of repetitive strain injury (RSI). The results of this study could provide important information to understand the way of using mobile phone in different age groups. and also could be used to design and market the mobile phone.

• Journal of Navigation and Port Research
• /
• v.38 no.2
• /
• pp.121-126
• /
• 2014

This paper suggests a new algorithm to provide low-cost GPS modules with DGPS service, which corrects the error vector in the already-calculated position by projecting range corrections to position domain using the observation matrix calculated from the satellite elevation and azimuth angle in the NMEA GPGSV data. The algorithm reduced the horizontal and vertical RMS error of U-blox LEA-5H module from 1.8m/5.8m to 1.0m/1.4m during the daytime. The algorithm has advantage in improving the performance of low-cost module to that of DGPS receiver by a software update without any correction in hardware, therefore it is expected to contribute to the vitalization of the future high-precision position service infrastructure by reducing the costumer cost and vender risk.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.5
• /
• pp.49-57
• /
• 2012

In P2P streaming management, peer's churning and finding efficient topology architecture optimization algorithm that reduces streaming delay is important. This paper studies a topology optimization algorithm based on the P2P streaming using peer's link information. The proposed algorithm is based on the estimation of peer's upload bandwidth using peer's link information on mesh-network. The existing algorithm that uses the information of connected links is efficient to reduce message overload in the point of resource management. But it has a risk of making unreliable topology not considering upload bandwidth. And when some network error occurs in a server-closer-peer, it may make the topology worse. In this paper we propose an algorithm that makes up for the weak point of the existing algorithm. We compare the existing algorithm with the proposed algorithm using test data and analyze each simulation result.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.6
• /
• pp.453-460
• /
• 2014

We analyze fault detection algorithm of ephemeris included in navigation message, which is one of the GNSS risk factors. This algorithm uses carrier-phase measurement and baseline vector of two reference stations and is alternative method for uncertainty condition of previous ephemeris. Even though same ephemeris fault is occurred, the geometry condition, between baseline vector of reference stations and satellites, effects on performance of algorithm. Also, we introduce the suitable geometry of reference stations, threshold and performance index (MDE : Minimum Detectable Error) in jeju international airport.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.4
• /
• pp.91-98
• /
• 2010

Advances in communications and control technology, the strengthening of the Internet, and the growing recognition of the urgency to reduce the risk and production cost are motivating the development of improvements in the traditional manufacturing industry. In this paper, we developed a remote dust collector bag control system which is a combination of advanced IT and traditional dust collector based on the event. At first, we made the A/D(Analog/Digital) converter using a micro processor because the differential pressure transmission, which is a sensor of the dust collector, produces analog volt data. A/D converter can provide RS-232 communication to connect with Power Line Communication(PLC) modem. And, n-bytes message format was defined for the efficient dust collector bag information transmission from a dust collector to a user. Also, we designed the data types to model the dust collector and the dust collector bag, and they were logically modeled using XML and object-oriented modeling method. In addition to that, we implemented the system for showing the dust collector bag exchange time exactly to users at real-time using various visual user interfaces.

• Korean Journal of Health Education and Promotion
• /
• v.21 no.2
• /
• pp.147-165
• /
• 2004

Injury is a leading cause of death in the children and adolescent populations. In particular, more than 80％ of unintentional injury was related to risk-taking behaviors involved in diverse accidents around school and home. Therefore, educational approaches should be provided for children and adolescent populations, and schools are the essential and appropriate sites to conduct safety education. This study was conducted to identify injury prevalence and safety education at schools among middle and high school students in Korea. About 1,034 middle and high students in 28 schools participated in a self-administered survey. The target schools were selected from the stratified random sampling method throughout schools of seven metropolitan cities in Korea. The questionnaires were delivered to the vice-principals by ground mailing service and the vice-principals administered survey data collection. The questionnaire asked about safety education provided in schools, injury experience in the last year, needs for injury prevention class in school, and demographics. All survey responses were entered into SPSS worksheet. Multivariate analysis of variance (MANOVA) and descriptive discriminant analysis (DDA) were used in statistical analysis with SPSS software 11.1. Multivariate analysis of variance was conducted as a preliminary analysis of DDA. According to the result of multivariate analysis of variance, gender (man), grade (poor), living with both parents, and displaying injury prevention messages on school news board were significantly different between the injured student group and the uninjured student group (p＝ .00). These four factors also had significant effects on students' injury experience in DDA, although correlation of the four factors with injury experience was weak overall based on their canonical function coefficients. All structure coefficients of the four factors were greater than .30, which means the four factors have discriminant effects on injury prevalence. The sizes of the discriminant effects, in order, were largly from gender, grade, living with both parents, and safety message display on school news boards.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.421-426
• /
• 2016

Recent developments in internet technologies has enabled widespread growth of embedded systems like Arduino, Raspberry Pi and other smart home systems. A research in the industrial sector on the utilization of the board has been made. The development needs of the embedded board in a reagent bottle case system has been highlighted. Current reagent Management System has to hold and manage the reagent itself is mostly to save the program using handwritten or machine. In addition, there is a risk to the system during the vulnerable zone administrator to manage the situation of the reagent bottle case can lead to a massive fire. In this paper, reagent bottle case RFID readers and data in real-time is monitored by attaching a sensor management through the database and sends a warning message to the mobile device of the administrator in real time during hazardous situations in the reagent bottle case. This is improve the reliability and efficiency of reagent bottle case.